Seco-Larm

3/4″ Tamper-Resistant Electric Rim Strike

The SECO-LARM Surface-Mount Electric Rim Strike designed with the strength and durability for use with rim-type exit devices with a Pullman latch bolt (3/4″ throw). The strike features 12/24 VDC operating voltage, selectable fail-safe/fail-secure operation, horizontal adjustment, and a surface-mount metal housing, eliminating the need for frame cutting during installation.

  • UL 294 and 1034 Listed
  • Tamper-resistant
  • 12/24 VDC Operating voltage
  • Non-polarized connection
  • Horizontal adjustment
  • Accommodates up to 3/4″ Pullman latch
  • Reversible non-handed design
  • Stainless steel construction
  • Surface-mount on metal or wood frames
  • Works with standard rim-type exit devices including SECO-LARM SD-962AR-36A and SD-962AR-36G
  • For Indoor Use Only
  • Static strength – 1,500-lb (6673N)
  • Tested for 250,000 cycles (UL Tested)
  • Low current draw: 540mA@12VDC, 270mA@ 24VDC
  • Field-selectable for fail-safe or fail-secure operation
  • Spacers included: 3x 1/32″ (0.9mm)
  • The SD-998C series is intended to be used with UL Listed Exit Hardware
  • The SD-998C series shall not impair the intended operation of an emergency unit
  • The SD-998C series shall not impair the operation of panic hardware mounted on the door
Operating Voltage 12/24 VDC
Current Draw 540mA@12VDC , 270mA@24VDC
Latch Throw 3/4″
Static Strength 1,500-lb (6673N)
Dynamic strength 70ft-lb (95J)
Endurance 250,000 cycles (UL Tested), Level IV
Destructive attack Level I
Line security Level I
Standby power Level I
Operating Temperature 14~120 F (-10~49 C)
Operating Humidity 0~85%
Dimensions 9″x1-3/4″x3/4″ (229x45x19 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

1/2″ Tamper-Resistant Electric Rim Strike

The SECO-LARM Surface-Mount Electric Rim Strike designed with the strength and durability for use with rim-type exit devices with a Pullman latch bolt (1/2″ throw). The strike features 12/24 VDC operating voltage, selectable fail-safe/fail-secure operation, horizontal adjustment, and a surface-mount metal housing, eliminating the need for frame cutting during installation.

  • UL 294 and 1034 Listed
  • Tamper-resistant
  • 12/24 VDC Operating voltage
  • Non-polarized connection
  • Horizontal adjustment
  • Accommodates up to 3/4″ Pullman latch
  • Reversible non-handed design
  • Stainless steel construction
  • Surface-mount on metal or wood frames
  • Works with standard rim-type exit devices including SECO-LARM SD-962AR-36A and SD-962AR-36G
  • For Indoor Use Only
  • Static strength – 1,500-lb (6673N)
  • Tested for 250,000 cycles (UL Tested)
  • Low current draw: 540mA@12VDC, 270mA@ 24VDC
  • Field-selectable for fail-safe or fail-secure operation
  • Spacers included: 1x-1/16″, 2x-1/8″ (1.5mm, 3mm)
  • The SD-998C series is intended to be used with UL Listed Exit Hardware
  • The SD-998C series shall not impair the intended operation of an emergency unit
  • The SD-998C series shall not impair the operation of panic hardware mounted on the door
Operating Voltage 12/24 VDC
Current Draw 540mA@12VDC , 270mA@24VDC
Latch Throw 1/2″
Static Strength 1,500-lb (6673N)
Dynamic strength 70ft-lb (95J)
Endurance 250,000 cycles (UL Tested), Level IV
Destructive attack Level I
Line security Level I
Standby power Level I
Operating Temperature 14°~120° F (-10°~49° C)
Operating Humidity 0~85%
Dimensions 9″x1-3/4″x1/2″ (229x45x13 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Sealed Housing Weatherproof Stand-Alone Digital Access Keypad

 12~24 VAC/VDC operation
 1,010 Users (Output #1: 1,000 users, Output #2: 10 users)
 2 Form C relays, each rated 1 Amp @ 30VDC
 Each relay has programmable output time from 1~99 seconds or toggle
 Output #2 can be programmed for use with a doorbell
 2 Egress inputs and 1 door sensor input
 Backlit keys for easy nighttime use
 Two multi-colored status LEDs
 Able to mount to a single-gang back box
 All features are programmed directly from the keypad – no need for an external programmer
 EEPROM memory protects programmed information in case of power loss
 Optical tamper for added security
 Circuitry is potted with epoxy for outdoor use
 IP65 Weatherproof rating, rugged aluminum construction

Type Sealed Housing Weatherproof Outdoor Digital Access Keypad
Number of User Codes Up to 1,010
Operating Voltage 12~24 VAC/VDC
Current Draw – Standby 64mA@12VDC
Current Draw- Active 92~120mA@12VDC
Relay Outputs (2) 1A@30VDC, Form C, NO/COM/NC
IP Rating Weatherproof IP65
Egress Inputs 2, N.O. Ground
Door Sensor Input N.C. Ground
Tamper Sensor Optical
Keypad LED Life 60,000 hours (over 6.8 years)
Operating Temperature -4°~122° F (-20°~50° C)
Dimensions 4-3/4″x3″x7/8″ (120x76x22 mm), 6″ x 1-3/4″ x 15/16″ (152 x 44 x 24 mm)
Weight 1-lb 2-oz (510g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM

USER CONTROL CHART

1,200-lb Electromagnetic Lock, Double-Door, UL Listed

The E-941Dx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

  • 1,200-lb (545kg) Holding force per door
  • No residual magnetism
  • MOV Surge protection
  • Anodized aluminum housing (US 28)
  • Adjustable mounting bracket
  • Complete mounting hardware for typical installations
  • Additional brackets available for easy mounting or atypical situations
  • Detachable faceplate for easy access to wiring
  • 12/24VDC Selectable
  • Multiple UL listings
        • UL294 Access Control System Units – USA
        • UL10C Positive Pressure Fire Test – USA
        • UL10B Fire Test of Door Assemblies – USA
        • ULC-S104 Fire Test of Door Assemblies – Canada
  • Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECO­LARM for details.

Holding force 1200-lb (545kg) per door
Operating voltage 12 /24 VDC (selectable)
Current draw 500mA@12VDC per door (1A total) 270mA@24VDC per door (540mA total)
Operating temperature 32º~120º F (0º~49º C)
Electromagnet dimensions 21″ x 2-5/8″ x 1-5/8″ (536x67x42 mm)
Armature dimensions 7-1/4″x2-3/8″x5/8″(185x61x16 mm)
Weight 21-lb (10kg)
Destructive attack Level I
Line security Level I
Standby power Level I
Endurance Level IV

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Seco-Larm E-941SA-600 Single Maglock

600-lb Electromagnetic Lock, UL Listed

The E-941Sx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

  • 600-lb (272kg) Holding force
  • No residual magnetism
  • MOV Surge protection
  • Anodized aluminum housing (US 28)
  • Adjustable mounting bracket
  • Complete mounting hardware for typical installations
  • Additional brackets available for easy mounting or atypical situations
  • Detachable faceplate for easy access to wiring
  • 12/24VDC Selectable
  • Multiple UL listings
      • UL294 Access Control System Units – USA
      • UL1034 Burglary Resistant Electric Lock – USA
      • UL864 Fire Alarm Systems – USA
      • UL10C Positive Pressure Fire Test – USA
      • UL10B Fire Test of Door Assemblies – USA
      • ULC-S104 Fire Test of Door Assemblies – Canada
  • Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECO­-LARM for details.

Operating voltage 12/24 VDC (selectable)
Current draw 500mA@12VDC, 250mA@24VDC
Door thickness (max.) 2″ (50mm)
Holding force 600-lb (272kg)
Dimensions – Magnet 9-13/16″x1-11/16″x1″ (250x43x25 mm)
Dimensions – Armature Plate 7-1/4″x1-1/2″x1/2″ (185x38x12 mm)
Operating humidity 0~85 (non-condensing)
Operating temperature 32°~120° F (0°~49° C)
Lock surface temperature ≤ Ambient temperature ± 68° F (20° C)
Destructive attack Level I
Line security Level I
Standby power Level I
Endurance Level IV
Weight 4-lb 6-oz (2kg)

UL 1034 Rating

Static strength 500-lb
Dynamic strength 50 ft-lb
Endurance 250,000 cycles

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Seco-Larm E-941SA-1200 Single Maglock

1,200-lb Electromagnetic Lock, UL Listed

The E-941Sx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

  • 1,200-lb (545kg) Holding force
  • No residual magnetism
  • MOV Surge protection
  • Anodized aluminum housing (US 28)
  • Adjustable mounting bracket
  • Complete mounting hardware for typical installations
  • Additional brackets available for easy mounting or atypical situations
  • Detachable faceplate for easy access to wiring
  • 12/24VDC Selectable
  • Multiple UL listings
      • UL294 Access Control System Units – USA
      • UL1034 Burglary Resistant Electric Lock – USA
      • UL864 Fire Alarm Systems – USA
      • UL10C Positive Pressure Fire Test – USA
      • UL10B Fire Test of Door Assemblies – USA
      • ULC-S104 Fire Test of Door Assemblies – Canada
  • Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECO­-LARM for details.

Operating voltage 12 /24 VDC (selectable
Current draw 500mA@12VDC, 250mA@24VDC
Door thickness (max.) 1-13/16″ (46mm)
Holding force 1,200-lb (545kg)
Dimensions – Magnet 10-1/2″x2-5/8″x1-9/16″ (267x67x40 mm)
Dimensions – Mounting Plate 10-1/2″x1-9/16″x1/4″ (267x40x5.5 mm)
Dimensions – Armature Plate 7-1/4″x2-3/8″x5/8″ (185x61x16 mm)
Operating humidity 0~85 (non-condensing)
Operating temperature 32°~120° F (0°~49° C)
Lock surface temperature ≤ Ambient temperature ± 68° F (20° C)
Destructive attack Level I
Line security Level I
Standby power Level I
Endurance Level IV
Weight 4-lb 6-oz (2kg)

UL 1034 Rating

Static strength 1,000-lb
Dynamic strength 70 ft-lb
Endurance 250,000 cycles

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING DIAGRAM

Seco-Larm SD-C101-SBAQ Grade 1 Door Closer

Surface-Type Door Closer with Back Check – Adjustable for Size 1~6, Door weight up to 330-lb (150kg), UL Listed

  • UL Listed
  • Heavy-duty Grade 1 door closer for commercial use
  • Adjustable sweep speed, latching speed, and back check
  • Cast-aluminum body & forged steel arm
  • Reversible, non-handed installation
  • Adjustable spring force
  • Concealing plastic cover included
  • ANSI 156.4 Certification – 2 million cycles
  • Includes hardware
  • Door width: 31-1/2″~60″ (800~1524 mm)
  • Door weight: 45~330-lbs (20~150 kg)
Closing Force ANSI Size 1~6 (adjustable)
Max. door width 60″ (1524mm)
Max. door weight 330-lbs (150kg)
Back check Yes
Max. door opening angle hinge side 180°
Cover Plastic
Construction Cast-aluminum body, forged steel arm

PRODUCT INFORMATION SHEET (PI)

MOUNTING TEMPLATE

Seco-Larm DH-151SQ / DH-171SQ Mag Door Holder

Magnetic Door Holder – Surface-Mount OR Flush-Mount UL Listed

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.

  • For use with door closers to control the release and closing of residential, commercial, and public area doors
  • Adjustable armature plate reduces installation time and adjusts to door alignment changes
  • Low profile design
  • Holding force – 33-lb (15kg)
  • 3 voltages: 12/24 VAC/VDC, and 120VAC
  • Cast aluminum faceplate
  • No residual magnetism for easy release
  • Built-in voltage spike suppressor
  • Use with SECO-LARM door closers
  • Optional extension bars available: 3/4″, 1″, 4″, 7″ (19mm, 25mm, 102mm, 178mm)
  • Use with SECO-LARM door closers SD-C121-S, SD-C131-SQ, SD-C101-SGQ, or SD-C101-SBAQ
Holding Force 33-lb (15kg)
Installation Surface-mount
Operating Voltage 12/24 VAC/VDC, 120VAC
Current Draw 52mA@12VAC, 60mA@12VDC, 27mA@24VAC, 31mA@24VDC, 24mA@120VAC
Magnet Box Weight 1-lb 6.4-oz (920g)
Door Armature Weight 8.1-oz (230g)
Electromagnet Dimensions 2-3/4″ x 4-9/16″ x 3″ (70 x 116.5 x 76 mm)
Armature Dimensions 2-9/16″ x 2-9/16″ x 1-9/16″ (65 x 65 x 40 mm)

 

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm SD-R400-BQ Microwave RTE Sensor

Microwave RTE Sensor

The ENFORCER Microwave RTE Sensor is a compact motion sensor with an adjustable output timer that can be connected to an access control keypad and can be used to trigger any device with an egress input.

  • 12~24 VDC Operating voltage
  • 24.150GHz Microwave Doppler technology
  • 10ft (3m) Sensing range, adjustable
  • Adjustable relay output time, 1~33 s
  • Small size allows for a wide range of applications
  • Universally compatible, install the sensor above doors for no-touch ingress/egress
  • More consistent detection in large areas and over a wide range of temperatures
  • Indoor use only

PRODUCT INFORMATION SHEET (PI)

MANUAL

ADVERTISEMENT

Rugged Grade 1 Rim-Type Exit Device, Push-to-Exit Bar

The ENFORCER SD-962AR-36G Rim-Type Exit Device, when mounted on the inside of a door to block entry to a protected premises, securely locks the door from outside access while allowing users inside the protected premises to exit. The stainless steel enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require exit. It can be connected to an entry-type lever trim or to any physical locking device on the outside of the door in order to allow entry to authorized personnel.

  • Pushbar is UL Listed for U.S. and Canada
  • Heavy-duty ANSI Grade 1 steel construction
  • Allows exit from inside while locked from outside
  • Reversible non-handed design
  • UL Listed, ANSI/BHMA A156.3 – (2008) requirements for Grade 1, UL 305​
  • For metal or wood doors up to 13/4” (44mm) thick
  • Separate deadlocking latch prevents the use of credit cards or similar means to open the latch bolt
  • Allen-type 1/4-turn dogging lock allows the exit device to be unlocked for extended periods of time
  • Includes all needed hardware for typical installations
  • Works with standard external door handle/lock devices such as the SD-962HL-4A (not included)
  • Fits doors from 33″ (84cm) to 48″ (122cm) wide
Construction ANSI Grade 1 steel
Door Type Up to 1-3/4″ (44mm) thick, wood or metal
Hand Type Non-handed
Latch Bolt Stainless-steel, 3/4″ (19mm) throw
Dead Latch Stainless-steel 5/8″ (16mm)
Strike For 5/8″ (16mm) stop
Spring Stainless steel
Chassis Plated steel
Cover Plated zinc cast
Rail Assembly Aluminum
End Cap Plated zinc cast
Dogging Hex-type dogging standard
Dimensions 33″x8″x2-3/16″ (838x203x56 mm)
Weight 9-lb 12-oz (4.4kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Entry-Type Lever Trim for Rim-Type Exit Devices on Exit Doors


Door type 1-3/4” thick, wood or metal
Hand type Non-handed
Latch bolt Stainless-steel, 3/4” throw
Dead latch Stainless-steel, 5/8”
Strike For 5/8”stop plus shim for 1/2” stop
Spring Stainless-steel
Chassis Steel
Cover High-density, rust-resistant alloy
Rail assembly  Steel
End cap  Steel
Dogging Allen-type dogging standard

PRODUCT INFORMATION SHEET (PI)

MANUAL

Mechanical Keypad Door Lock

The SECO-LARM Mechanical Keypad Door Lock provides secure locking while avoiding the hassle and cost of dealing with providing, duplicating, or replacing keys. Unlike keyed locks, the lock code can be easily changed by the user at any time. The code is not sequential, so the code letters/digits can be entered in any order. Since it is completely mechanical, there is no need to run wires from a power supply or replace batteries. The inside handle always operates to allow safe egress in an emergency.

 Non-handed installation
 External and internal entry lever
 13 code buttons, over 8,000 possible codes
 Lock code easily changed
 Suitable for door thicknesses from1-3/16″~2-1/8″ (30~54 mm)
 Tubular latchbolt included
 Heavy-duty steel case US32D/630
 Fully mechanical
 No batteries or other power source required
 Free egress from inside
 Indoor or outdoor use
 Simple Installation
Type Fully mechanical keypad lock
Code length 4~6 Digits (0~9, X, Y, and Z)
Handed Field reversible (factory default – internal, right-handed / external, left-handed)
Bolt throw 1/2″ (13mm)
Backseat 2-3/4″ (70mm)
Housing Heavy-duty satin finish stainless steel US32D/630
Dimensions 2″ x 4-3/4″ x 5-1/2″ (50x120x140 mm)
Weight 3-lb 1-oz (1.35kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM


Vandal Resistant Flush-Mount Access Control Keypad

  • 12~24 VAC/VDC auto-adjusting operation
  • Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2
  • Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
  • Output #1: Form C relay, 1A@30VDC max.
  • Output #2: Transistor ground, 100mA@24VDC
  • Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Tamper output: N.C. Dry contact, 50mA@24VDC max
  • Mounts to standard single-gang back box
  • IP66 Weatherproof rating
  • Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode
  • All features are programmed directly from the keypad: No need for an external programmer
  • EEPROM Memory protects programmed information in case of power loss
  • Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2
  • Duress code signals a silent alarm if an authorized user is forced to open the door under duress
  • Egress input lets users exit the premises without keying in the code
  • Door sensor input for anti-tailgating operation
  • Interlocking input for connecting to a second keypad
Operating Voltage 12~24 VDC/VAC
Current Draw – Standby 15mA@12VDC
Current Draw – Keypress 40mA@12VDC
Current Draw – Output 1 Active 65mA@12VDC
Current Draw – Output 1 & 2 Active 66mA@12VDC
Current Draw – Total Max 100mA@12VDC
Output- #2 Transistor Ground 100mA@24VDC
Output 1 1A@30VDC
Output – Duress 100mA@24VDC
Output – Interlock 100mA@24VDC
Output- Tamper 50mA@24VDC
IP Rating Weatherproof IP66
Input – Egress N.O. Ground
Input – Door Sensor N.C. Ground
Input – Door Inhibit N.O. Ground
Operating Temperature -4°~158° F (-20°~70° C)
Operating Humidity 5~95% Non-condensing
Dimensions 4-3/4″x3-1/8″x1-13/16″ (120x80x46mm)
Weight 16.2-oz (300g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL CHART

Mechanical Push Bar, Black

ENFORCER Electromechanical Push Bars feature a double-locking spindle for stronger and more secure locking. All models include a cylinder lock for keyed entry and some models offer solenoid-actuation to allow unlocking and relocking by an access control device.

  • Double-locking spindle (stronger and more secure)
  • Aluminum alloy construction, reversible, non-handed
  • Fail-secure operation (but can be opened from inside by pressing the bar)
  • Lock status monitoring for indicating status
  • Mortise lock cylinder and keys included to release the lock from the outside
  • Dogging latch on push bar to hold open
  • Includes all needed hardware for typical installations
Housing Anodized aluminum
For doors 36″ (91.5cm), min. 327/8″ (83.5cm), wood or metal
Relay rating Form C, 5A@125VAC
Mode Fail-secure
Dimensions 2 7/16″x2 9/16″x35 1/16″ (61.5x65x890 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Solenoid-Actuated Push Bar, Black

ENFORCER Electromechanical Push Bars feature a double-locking spindle for stronger and more secure locking. All models include a cylinder lock for keyed entry and some models offer solenoid-actuation to allow unlocking and relocking by an access control device.

  • Double-locking spindle (stronger and more secure)
  • Aluminum alloy construction, reversible, non-handed
  • Fail-secure operation (but can be opened from inside by pressing the bar)
  • Lock status monitoring for indicating status
  • Mortise lock cylinder and keys included to release the lock from the outside
  • Dogging latch on push bar to hold open
  • Includes all needed hardware for typical installations
  • Solenoid-actuation allows unlocking and relocking by an access device
  • Solenoid is rated for both continuous and intermittent operation
Operating voltage 12~24 VDC/VAC
Current draw 1.5A (0.5A after 3s)
Endurance Over 500,000 cycles
Housing Anodized aluminum
For doors 36″ (91.5cm), min. 327/8″ (83.5cm), wood or metal
Relay rating Form C, 5A@125VAC
Mode Fail-secure
Dimensions 2 7/16″x2 9/16″x35 1/16″ (61.5x65x890 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

1/2″ Tamper-Resistant Electric Rim Strike – Black

The SECO-LARM Surface-Mount Electric Rim Strike designed with the strength and durability for use with rim-type exit devices with a Pullman latch bolt (1/2″ throw). The strike features 12/24 VDC operating voltage, selectable fail-safe/fail-secure operation, horizontal adjustment, and a surface-mount metal housing, eliminating the need for frame cutting during installation.

  • UL 294 and 1034 Listed
  • 12/24 VDC Operating voltage
  • Non-polarized connection
  • Horizontal adjustment
  • Accommodates up to 3/4″ Pullman latch
  • Reversible non-handed design fits either right-hand or left-handed doors
  • Surface-mount on metal or wood frames
  • Works with standard rim-type exit devices including SECO-LARM SD-962xR-36A and SD-962xR-36G
  • For Indoor Use Only
  • Static strength – 1,500-lb (6673N)
  • Tested for 250,000 cycles (UL Tested)
  • Low current draw: 540mA@12VDC, 270mA@ 24VDC
  • Field-selectable for fail-safe or fail-secure operation
  • The SD-998C series is intended to be used with UL Listed Exit Hardware
  • The SD-998C series shall not impair the intended operation of an emergency unit
  • The SD-998C series shall not impair the operation of panic hardware mounted on the door
Operating Voltage 12/24 VDC
Current Draw 540mA@12VDC , 270mA@24VDC
Latch Throw 1/2″
Static Strength 1,500-lb (6673N)
Dynamic strength 70ft-lb (95J)
Endurance 250,000 cycles (UL Tested), Level IV
Destructive attack Level I
Line security Level I
Standby power Level I
Operating Temperature 14°~120° F (-10°~49° C)
Operating Humidity 0~85%
Dimensions 9″x1-3/4″x1/2″ (229x45x13 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Illuminated Push-to-Open Bar

The ENFORCER Illuminated Push-to-Open Bar works with an external electric strike or maglock to provide egress from a protected area. It can work in stand-alone mode or as part of an access control system, but also can be locked open by key. Buzzer, output timing, and LED function and colors are also customizable.

  • Provides convenient on-door egress
  • LED makes it easy to see the status
  • Can be stand-alone or connected to an access control system
  • Dogging – standard dogging with hex key
  • For 36″ doors – actual length: 337/16” (85cm)
  • Can be cut to fit smaller doors, minimum 235/8” (60cm)
  • Two built-in non-latching (momentary), dual-contact switches (NO/NC/COM) rated at ≤5A@230VAC, adjustable 0.5~60 sec
  • Large LED shows red in standby and green when triggered, but is programmable red/green/blue by an access control panel
  • Blinking LED and buzzer programmable for relock warning
  • Built-in buzzer indicates unlocked (selectable, up to 92dB)
Operating voltage 12~24 VDC
Power consumption 180mA@12VDC, 140mA@24VDC (max.)
Contact load ≤5A@230VAC
Outputs NO/NC/COM x2
Trigger duration 0.5~60 seconds (adjustable) or dogged open
Buzzer Up to 92dB (adjustable)
LED Indicators – Colors Stand-alone red/green, Controlled red/green/blue
LED Indicators – Size 8-1/4″x1″ (210×25 mm)
Door width 36″ (91.4cm), minimum 23-5/8″ (60cm)
Door Size 32°~150° F (0°~70° C)
Dimensions 33-7/16″x2-3/8″x2-3/8″ (850x61x61 mm)
Weight 4-lb 10-oz (2.1kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

SD-995A-D3Q

Weatherproof Door/Gate Strike

  • Unique design accommodates both wood and metal doors
  • Fail-secure operation
  • Reversible for right or left-handed doors
  • Zinc alloy body
  • Corrosion-resistant case and moving parts
  • Complete mounting hardware included
  • Operating voltage: 12~24 VAC/VDC
  • 1,034-lb (470kg) Holding force
  • Tested to 250,000 cycles
  • Current draw: 500mA@12VDC, 1A@24VDC
  • Strike depth: 9/16” (15mm)
  • Faceplate size: 31/2“x17/16“x1/8” (89x35x3 mm)
  • Weather-resistant IP42
Operating Voltage 12~24 VAC/VDC
Operation Fail-Secure
Current Draw 500MA@12VDC , 1A@24VDC
Keeper Width 1-5/8″ (41mm)
Design Reversible non-handed
Strike Depth 9/16″ (15mm)
Operating Temperature 14°~113° F (-10°~45° C)
Operating Humidity 0~95% RH (no condensation)
Dimensions 3-1/2″x1-7/16″x1/8″ (89x35x3 mm)
Holding Force 1,034-lb (470kg)
IP Rating Weather-resistant IP42

PRODUCT INFORMATION SHEET (PI)

MANUAL

ADVERTISEMENT

  • Converts cylindrical lock sets into an electronic access-controlled locking system
  • Fail-secure operation – Door remains locked if power to the strike is lost
  • 2-wire installation, non-polarized connection
  • Stainless steel keeper for strength and long life
  • Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut* Strike Plates
  • Can be used with virtually any cylindrical door locking system
  • Can be used with an optional digital keypad, pushbutton switch, and other entry devices.
  • Suitable for office-type applications
  • Reversible non-handed design fits either right-hand or left-hand doors
  • Shallow design for use with most metal doors
  • Powered by a solenoid, not a buzzer coil
  • For indoor use​
  • Optional Bronze-Colored Aluminum Low-Cut* Strike Plate (SD-991RA-61Q/B) available:

*Fits most metal or wood doors with minimum cutting of door frame beyond the hole for the strike

Operating Voltage 12VDC
Current Draw 280mA@12VDC
Latch Throw 1/2″ (13mm)
Static Strength 1,000-lb (454kg)
Endurance 250,000 Cycles (Factory tested)
Operating Temperature 14°~120° F (-10°~49° C)
Operating Humidity 0~85% (Non-condensing)
Dimensions Stainless Steel No-Cut Plate: 2-3/4″x1-1/8″x15/16″ (70x28x24 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM

ADVERTISEMENT

Seco-Larm SD-961A-36 Push-to-Exit Bar
  • New end caps come off and go on in seconds
  • Designed to allow egress from inside an area normally locked by an electric lock or electromagnetic lock, and/or to disarm (shunt) or trigger an alarm when the door is opened
  • Rugged, heavy-duty construction
  • Pushing the bar at any point sends a signal to release the lock and/or sound an alarm
  • For 36 inch doors (actual length is 34.5 inches)
  • Includes 2 built-in non-latching (momentary), dual-contact switches (NO/COM/NC), rated 25A@24VAC
  • Attractive brushed-aluminum bar with black base and trim
  • Includes SECO-LARM SD-969-A18Q Armored Door Cord, and mounting hardware (for mounting in wood or metal doors)
  • Designed for easy cutting in field to match width of non-standard-sized doors
Circuit Type 2 Built-in momentary dual contact NO or NC contacts
Contact Rating 25A@24VAC
Door Size For 36” doors (actual size: 34-1/2”)
Dimensions 34-1/2”x2-3/4”x2-13/32” (876x70x61 mm)
Weight 7-lb (3kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Indoor Illuminated Access Control Keypad with Proximity Reader

  • Built-in proximity card reader
  • 12~24 VAC/VDC Auto-adjusting operation
  • Up to 1,000 possible user codes/cards for output 1, 100 for output 2, and 100 for output 3
  • Up to 50 possible visitor codes for one-time or limited-time use (1~99 hours)
  • Up to 50 duress codes for output 1, 10 for output 2, and 10 for output 3
  • Output 1: Form C relay, 1A@30VDC max. / output 2: Form C relay, 1A@30VDC max. / output 3: transistor ground, 100mA@24VDC
  • Outputs 1, 2, and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Tamper output N.C. Dry contact, 50mA@24VDC max.
  • All features are programmed directly from the keypad; no need for an external programmer
  • EEPROM Memory protects programmed information in case of power loss
  • Duress code triggers a silent alarm if a user is forced to open the door under duress
  • Egress input lets users exit the premises without keying in the code
  • Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
  • Mounts to a standard single-gang back box (surface-mount back box included)
  • Keypad active or alarm output selectable via jumper
  • Interlocking input for connecting to a second keypad
  • Door sensor input for anti-tailgating
  • Data I/O terminal for split-series setup providing added security
  • Expansion port for future optional features
Operating Voltage 12~24 VAC/VDC
Current Draw Standby: 66mA@12VDC
Keypress: 93mA@12VDC
Output 1 active: 99mA@12VDC
Output 1 & 2 active: 126mA@12VDC
Output 1, 2 & 3 active: 127mA@12VDC
Total max. current draw: 160mA@12VDC
Outputs #1 Form C: 1A@30VDC
#2 Form C: 1A@30VDC
#3 Transistor ground: 100mA@24VDC
K or A: 100mA@24VDC
Duress: 100mA@24VDC
Interlock: 100ma@24VDC
Tamper:50mA@24VDC
Inputs Egress: N.O. Ground
Door sensor: N.C. Ground
Door inhibit: N.O. Ground
Proximity Reader Frequency 125kHz (EM125)
Proximity Reader Sensing Distance 1-1/2” (38mm)
Operating Humidity 5~95% Non-condensing
Operating Temperature -4°~158° F (-20°~70° C)
Dimensions (including back box) 4-5/8″x2-7/8″x1-15/16″ (117x73x49 mm)
Weight 6-oz (170g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Heavy-Duty Outdoor Access Control Keypad with Proximity Reader

The ENFORCER SK-3133-PPQ features rugged construction with a heavy-duty stainless-steel faceplate and a coated steel backing to withstand the elements.

  • Rugged construction – heavy-duty stainless steel faceplate with coated steel housing
  • Built-in proximity reader
  • 12~24 VAC/VDC Auto-adjusting operation
  • Up to 1,000 possible user codes/cards for output 1 and 100 each for outputs 2 and 3
  • Up to 50 possible visitor codes, for one-time or limited-time use (1~99 hours)
  • Up to 50 duress codes for output 1 and 10 each for outputs 2 and 3
  • Output 1: Form C relay, 5A@24VDC max. / output 2 and 3: Form C relay, 1A@24VDC max.
  • Outputs 1, 2 and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Tamper output, 50mA@24VDC max.
  • All features are programmed directly from the keypad, no need for an external programmer
  • EEPROM Memory protects programmed information in case of power loss
  • Egress input lets users exit the premises without keying in the code
  • Door sensor input for anti-tailgating operation
  • Interlocking input for connecting to a second keypad
  • Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
  • Vandal resistant, suitable for wall, post, or gooseneck mounting
  • IP66 Weatherproof
Type Heavy-Duty, Outdoor, Stand-Alone Keypad
Operating Voltage 12~24 VAC/VDC
Current Draw – Standby 55mA@12VDC
Current Draw- Relays Active 220mA@12VDC
Relay Output- #1 5A@24VDC
Relay Output- #2 1A@24VDC
Relay Output- #3 1A@24VDC
IP Rating Weatherproof IP66
Egress Inputs N.O. Ground (P.B)
Operating Temperature -4º~158º F (-20º~70º C)
Dimensions 5-1/4″x7-1/16″x3-3/8″ (133x180x85 mm)
Weight 3-lb 12-oz (1.7kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL CHART

ADVERTISEMENT

Bluetooth Access Controller – Proximity Reader

Rethinking Access Control – Streamlined, fully app-based setup using integrated Bluetooth® wireless technology. No codes to remember, intuitive app design for easy, visual programming. Provides convenience and security to the user and administrator. All data is secured on the device without the risks inherent with an internet connection.

  • No Codes to Remember – Intuitive, visual app-based programming and management, 1,000 users, device options, etc.
  • No Cloud, No Internet Exposure – All data secured locally on device, set and monitored by the administrator
  • App-Based Programming – No complicated software to install, no subscription fees
  • More Than Access – Control doors, gates, lighting, machinery, etc.
  • Secure, Integrated Bluetooth – Passcode protected, AES 128
  • Easy Installation – No control panel necessary
  • Output Modes – Timed relock (1~1,800 seconds), continually unlocked or locked, toggle
  • Hold Open – Hold door open with code or app (customizable)
  • User Customization – Individually customizable output mode / time
  • Multiple User Types – Permanent, scheduled, temporary, # of times
  • Authorized User Monitor – Displays total number of users to guard against unauthorized additions
  • User List Export / Import – for archiving, replicating to other devices, or for off-device editing on a computer
  • Two Ways to Unlock or Trigger a Device – Proximity card or app
  • Unlimited Devices – Access/manage unlimited devices with one app
  • Easy Backup/Restore – Off-device storage / restoration / replication
  • Wrong-Code Lockout – Customizable # of wrong codes and time
  • Tamper Alarm Output – Customizable alarm timing and sensitivity
  • Multilingual App Interface – English, Spanish, French, Portuguese, German, Russian, Vietnamese, and Chinese
  • Weatherproof (IP65)
Access modes App / proximity card
Bluetooth radio Bluetooth Low Energy (BLE) 4.2
Users 1,000 users / 1 administrator
Operating voltage 9~25 VDC
Current draw (max.) 80mA@12VDC, 45mA@24VDC
Inputs Egress: N.O. Ground Door sensor: N.C. Ground
Outputs – Relay Solid state, form C, 2.5A@30VDC
Output – Tamper 50mA@30VDC
IP Rating IP65 Weatherproof
Operating temperature -4°~122° F (-20°~50° C)
Dimensions 3-1/8″x4-1/2″x11/16″ (80x114x18 mm)
Weight 6.3-oz (180g)

PRODUCT INFORMATION SHEET (PI) (ENGLISH)

PRODUCT INFORMATION SHEET (PI) (SPANISH)

PRODUCT INFORMATION SHEET (PI) (FRENCH)

BROCHURE

QUICK INSTALLATION / SETUP GUIDE

SL ACCESS™ APP USER MANUAL

SL ACCESS™ OTA FIRMWARE UPDATE GUIDE

ADDITIONAL PRODUCT INFORMATION SHEET

INSTALLATION / ADMINISTRATOR GUIDE

USER INSTRUCTIONS

ENFORCER BLUETOOTH® ACCESS CONTROLLER USER FAQ

ADVERTISEMENT

Seco-Larm SD-997C-GCQ

Seco-Larm SD-997C-GCQ

by Seco-Larm
$ 39.50

Electric Deadbolt Cabinet Lock

The SECO-LARM Electric Deadbolt Cabinet Lock provides security for lockers, cabinets, cases, and drawers. Dual voltage settings and on-site reversible fail-safe/fail-secure operation offers flexibility and easy installation. The built-in lock status sensor allows for monitoring whether the cabinet doors are locked.

  • Electronically secure lockers, cabinets, cases, and drawers
  • Lock status sensor allows for monitoring whether doors or drawers are locked
  • Selectable fail-safe/fail-secure operation
  • Operating voltage: 12/24 VDC
  • Current draw: 300mA@12VDC and 150mA@24VDC
  • Mounting hardware included
Operation Fail-safe / Fail-secure
Contact Switch NO/NC.
Current Draw 300mA@12VDC, 150mA@24VDC
Lock Status Rating 1A@30VDC
Lock status Micro-switch
Operating Voltage 12/24 VDC
Door Status Reed switch, 10W (Max)
Door Status Max Switching Contact 0.5A
Dimensions 3-1/4” x 1-3/16” x 1-1/8” (82x30x28 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL