Adams Rite Electric Strikes In Stock In 313 & 628 Finishes. Description: 7100, 7101 Electric Strikes with 4-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in aluminum jambs and stiles.

7100 Installation Instructions

Adams Rite 7100/7101 Catalog

Adams Rite 7400 Electric Strike

Adams Rite 7101 Electric Strike

Function: Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. Fits existing prep for discontinued Adams Rite 7000, 7500, 7800 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-5/8” deep.

Strike Lip: Basic 7100 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available on 7101.

Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.

Faceplate: Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

US Lock Supply Stocks The 7140 In All Finishes & Options. Description: 7140 Electric Strikes with 4-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in hollow metal or wood doors and jambs.

Function: Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type locksets with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb sections as shallow as 1-5/8”. Fits existing prep for discontinued Adams Rite 7040, 7840N, 7850 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-5/8” deep. Zinc aluminum alloy.

Strike Lip: Basic 7140 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.

Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.

Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with square corners. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Adams Rite Electric Strikes In Stock In 313 & 628 Finishes. Description: 7100, 7101 Electric Strikes with 4-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in aluminum jambs and stiles.

Function: Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. Fits existing prep for discontinued Adams Rite 7000, 7500, 7800 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-5/8” deep.

Strike Lip: Basic 7100 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available on 7101.

Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.

Faceplate: Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

US Lock Supply Stocks The 7110 & 7111 In All Finishes & Options. Description: 7110 Electric Strike with 7-15/16” faceplate and 7111 Electric Strike with 10-1/4” faceplate are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in hollow metal, wood and aluminum door jambs.

Function: Replaces earlier 002, 7510, or 7810 electric releases in either metal or wood jambs for remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-5/8”.

Finishes:

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-5/8” deep.

Strike Lip: Basic 7110 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number (see catalog page).

Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.

Faceplate: Faceplate for 7110 measures 1-7/16” x 7-15/16”. 7111 faceplate measures 1-7/16” x 10-1/4”. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

The Hes 4500C series electric strike is designed for installation in 2" UL 10C fire-rated frames with 1/2" drywall penetration. The 4500C features a low profile 1-3/8" depth, heavy-duty stainless steel construction. Its strength is derived from a unique keeper pin locking design, enabling the 4500C to exceed the ratings of the frame, door and locking hardware. 

US Lock Supply Stocks The 4500c Series In Stock In All Finishes & Options Ready To Ship. Wholesale & Bulk Pricing Available.  

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

Finishes:

630 - Satin stainless steel

605 - Bright brass

606 - Satin brass

612 - Satin bronze

613 - Bronze toned

629 - Bright stainless steel

Each Complete Pac conveniently paris the reliabilty of an HES electric strike with the flexibility of multiple faceplates in a single simple package. The 4500C includes a 4500 strike body and two interchangeable faceplates to accommodate most cylindrical and mortise latchbolts (without deadbolts). 

US Lock Supply Stocks The 7130 & 7131 In All Finishes & Options.

Description: 7130, 7131 Electric Strikes with 6-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in aluminum jambs and stiles.

Function: Remote electrical control of any narrow stile or hollow metal door equipped with an Adams Rite Series 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Large faceplate is designed to cover strike opening when converting from an MS pivoted-bolt deadlock to a deadlatch. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. Replaces discontinued Adams Rite 7030, 7530, 7830 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-5/8” deep.

Strike Lip: Basic 7130 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available for 7131.

Strike Opening: 5/8” x 1-7/16” x ½” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.

Faceplate: Measures 1-1/4” x 6-7/8”. 7130 has flat faceplate, 7131 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

US Lock Supply Stocks The 7160 In All Opions. Description: 7160 Electric Strikes with 4-7/8” faceplates are designed for mortise or cylindrical type locksets with up to 3/4” latchbolt projection without deadbolt. For use in aluminum jambs.

Function: Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-7/8”. Fits existing prep for discontinued Adams Rite 7560, 7860 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-7/8” deep.

Strike Lip: Basic 7160 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.

Strike Opening: 3/4” x 1-7/16” x 5/8” deep. Bolt retainer jaw is stainless steel. Strike location must be centered on latchbolt.

Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

US Lock Supply Stocks The 7170 In All Opions.

Description: 7170 Electric Strikes with 4-7/8” faceplates are designed for mortise or cylindrical type locksets with up to 3/4” latchbolt projection without deadbolt. For use in hollow metal or wood door jambs.

Function: Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into hollow metal jamb sections as shallow as 1-7/8”. Fits existing prep for discontinued Adams Rite 7560AN, 7570, 7860AN, 7870 Electric Strikes.

The electric strike must be positioned to accommodate offset mortise latches during installation. Please refer to installation instructions.

Specifications:

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Case: Approximately 1” x 3-3/8” x 1-7/8” deep.

Strike Lip: Basic 7170 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.

Strike Opening: 5/8” x 1-7/16” x 5/8” deep. Bolt retainer jaw is stainless steel.

Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with square corners. Available in a wide range of architectural finishes.

Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

Description: 7440 Electric Strikes with 4-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in hollow metal or wood door jambs and steel or wood doors. Opens electrically under 35 lbs. of preload.

Function: Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-1/16”. Direct upgrade for Adams Rite 7140 Electric Strikes.

Finishes:

313-Dark Bronze Anodized Aluminum

628-Clear Aluminum Anodized

This non-handed strike features an ultra-compact design and an adjustable stainless steel split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike releases electrically with up to 35 lbs. of door “preload” (pressure exerted on doors by air conditioning systems, warping or misaligned hardware which can disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in type connector.

Specifications:

Fail-Safe/Fail-Secure: Field selectable at time of installation.

Case: Approximately 1” x 3-3/8” x 1-1/16” deep.

Strike Lip: Basic 7400 electric strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available.

Strike Opening: 5/8” adjustable x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of Adams Rite 4500, 4700 (discontinued), or 4900 Series Deadlatch or cylindrical latches

Faceplate: Measures 1-1/4” x 4-7/8” Faceplate is flat, with square corners. Available in a wide range of architectural finishes.

Voltage: 

• Field selectable to match power source of 12, 16, or 24 VDC.
• 16 DC requires adapter (P/N VA 7400-16VDC)
• 4603 Rectifier is required to convert low voltage AC current to DC current of same voltage. Please contact factory when using in AC mode.  

Options:

Monitoring – Two internally mounted switches (Form “C”) to indicate when the latchbolt is engaged in the strike jaws and a locked/unlocked solenoid status.

Lip Extension Kits – Please see catalog for more information.

Modular Packaging – Consult factory or sales representative for details.

Wood Door Cover – WDC7400 for use when mounting the 7400 Series Electric Strike on the inactive leaf of a pair of door. The cover simplifies the mortise prep.

ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified products to ElectroLynx system.

16 VDC Adapter – VA7400-16VDC required when using 16 VDC power.

For more information please see POWER.

Standard Package: Individually boxed with mounting screws, mounting tabs, adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8”, and adjustable jaw shim pack and two plug-in voltage adapters for 12/16/24 VAC and 12/24 VDC.

US Lock Supply Stock The 74R1 Ready To Ship. Description: The 74R1 Electric Strike is designed for rim exit devices with 3/4” Pullman type latchbolt. For use in hollow metal, wood and aluminum door jambs. Opens electrically under 35 lbs. of preload.

Function: A semi-mortised strike for rim exit devices having 3/4” Pullman type bolts without auxiliary bolts. Provides electrical remote control, allowing door to open without actuation of the exit device.

This non-handed strike features an ultra-compact design and a stainless steel split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike releases electrically with up to 35 lbs. of door “preload” (pressure exerted on doors by air conditioning systems, warping or misaligned hardware which can disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in type connector.

Specifications:

Fail-Safe/Fail-Secure: Field selectable at time of installation.

Case: 74R1: 1-13/32" x 3-3/8" x 1-1/16" deep [35.7 mm x 85.7 mm x 27 mm deep]

Mounting Plate/Housing: Measure 1-3/4” x 9” x 11/16” deep. Made of zinc aluminum alloy. Standard finish in epoxy to match Clear, Dark Bronze Anodized and Black Anodized finishes.

Strike Opening: 5/8” x 1-7/16” x 9/16” deep. Bolt retainer jaw is stainless steel. Strike accepts Pullman bolt of exit devices without deadlocking bolts.

Voltage: 

• Field selectable to match power source of 12, 16, or 24 VDC.
• 16 DC requires adapter (P/N VA 7400-16VDC)
• 4603 Rectifier is required to convert low voltage AC current to DC current of same voltage. Please contact factory when using in AC mode.

US Lock Supply Stocks The Adams Rite 74R2 Ready To Ship In All Options. Description: The 74R2 Electric Strike is designed for narrow style rim exit devices with 1/2” Pullman type latchbolt. For use in aluminum door jambs. Opens electrically under 35 lbs. of preload.

Function: A semi-mortised strike for rim exit devices having 1/2” Pullman type bolts. Provides electrical remote control, allowing door to open without actuation of the exit device.

This non-handed strike features an ultra-compact design and a stainless steel split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike releases electrically with up to 35 lbs. of door “preload” (pressure exerted on doors by air conditioning systems, warping or misaligned hardware which can disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in type connector.

Specifications:

Fail-Safe/Fail-Secure: Field selectable at time of installation.

Case: Approximately 1” x 3-3/8” x 1-1/8” deep.

Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel.

Mounting Plate/Housing: Made of zinc aluminum alloy and measures 1-5/8” x 9” x 1/2” deep. Standard finish in epoxy to match Clear, Dark Bronze Anodized and Black Anodized finishes.

Voltage: 

• Field selectable to match power source of 12, 16, or 24 VDC.
• 16 DC requires adapter (P/N VA 7400-16VDC)
• 4603 Rectifier is required to convert low voltage AC current to DC current of same voltage. Please contact factory when using in AC mode.

The 7501 series electric strike is ideal for fire-rated applications with pre-load conditions which may be caused by a warped or misaligned door, weather stripping, a smoke seal or any other condition that could cause door bind.  The heavy duty stainless steel construction provides the strength and durability required to accommodate fire-rated latchbolts up to 3/4" throw.

Specifications

• UL 10C, fire-rated, 3 hour (fail secure only)
• CAN4-S104 (ULC-S104) fire door conformant
• UL 1034, burglary-resistant listed
• ANSI/BHMA A156.31, Grade 1
• NFPA-252 fire door conformant
• ASTM-E152 fire door conformant
• MEA New York City accepted
• Patent #5,484,180

Frame application

• Metal
• Wood

Electrical

• .45 Amps at 12 VDC continuous duty
• .25 Amps at 24 VDC continuous duty

Standard Features

• Stainless steel construction
• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• Field selectable fail safe/fail secure
• Accommodates pre-load (fail secure only)
• Keeper shims for horizontal adjustment
• Non-handed
• Internally mounted solenoid
• Strike body depth 1-11/16"
• Plug-in connector
• Trim enhancer
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor

The 8500 series is a fire rated, compact, high performance electric strike featuring a unique concealed design for use with mortise locksets without a deadbolt. Designed for fast, convenient installation, the 8500 installs with little or no modification to the frame. Simply remove the existing strike plate, remove the dust box and install. Its strength is derived from a unique keeper pin locking design, enabling the 8500 to exceed Grade-1 ratings. This unique electric strike complies with NFPA 80-07 guidelines for retrofit into fire-rated frames. The 8500 accommodates mortise latchbolts up to 3/4" throw.

Specifications

• UL 10C-fire-rated, 3 hour (fail secure)
• CAN4-S104(ULC-S104) fire door conformant
• NFPA 80-07 Compliant
• UL 1034 burglary-resistant listed and suitable for outdoor use
• ANSI/BHMA A156.31, Grade 1
• NFPA -252 fire door conformant
• ASTM-E152 fire door conformant
• Patents Pending

Frame application

• Metal
• Wood

Electrical

• .24 Amps @ 12VDC
• .12 Amps @ 24VDC
• DC continuous duty/AC intermittent
  duty only

 Standard Features

• No cutting of the face of the frame
• Stainless steel construction
• Tamper resistant
• Static strength 1,500 lbs
• Dynamic strength 70 ft-lbs
• Endurance 500,000 cycles
• Field selectable fail safe / fail secure
• Dual voltage 12 or 24 VDC/VAC
• Non-handed
• Metal or Wood Frame
• Internally mounted solenoid
• Accommodates 3/4” mortise latchbolts
• Strike body depth 1-5/16”
• Plug-in connector
• Full pocket shims for horizontal adjustment
• Five year limited warranty

Optional Features

• 4 faceplate options
• Three deadlatch platforms to work with all major
  mortise locksets
• LBM - Latchbolt Monitor
• LBSM - Latchbolt Strike Monitor

The 9400 series is a slim-line, surface mounted electric strike designed to accommodate rim exit devices with a 1/2" Pullman latch. All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install.

The 9400 ships with a 1/8" spacer plate to accommodate varying door gaps. The 9400 exceeds Grade-1 standards for strength and performance. It is field selectable for fail secure and fail safe operation, and for 12 or 24VDC. The 9400 features a smooth cover to conceal the mounting screws and provide a sleek surface for superior looks.

Specifications

• UL 1034 burglary-resistant listed and suitable for outdoor use
• ANSI/BHMA, A156.31 Grade 1 (#E09731, #E09732, #E09373)
• RoHS Compliant
• Patent 6,390,520;8,454,063
• Patent Pending

Frame application

• Metal
• Wood

Electrical

• .45 Amps at 12VDC continuous duty
• .25 Amps at 24VDC continuous duty

Standard Features

• Installs in metal and wood frames
• Completely surface mounted
• Decorative cover for sleek new look
• Stainless steel construction
• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• 1/8" spacer plate included
• Field selectable fail safe/fail secure
• Dual voltage 12 or 24 VDC
• Horizontal adjustment
• Non-handed
• Internally mounted solenoid
• Accommodates up to 1/2" Pullman latch
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

The 9500 Series is a 3 hour fire rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" Pullman latch. All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt and install. Adjustments have never been easier as the base is now separate from the cover. The 9500 exceeds grade-1 standards for strength and performance. It is field selectable for fail secure and fail safe operation, and for 12 or 24VDC. This unique electric strike complies with NFPA 80-07 guidelines for retrofit into fire-rated frames.

Specifications

• UL 10C fire-rated, 3 hour (fail secure)
• CAN4-S104 (ULC-S104) fire door conformant
• WHI fire door listed
• UL 1034 burglary-resistant listed and suitable for outdoor use
• UL 294 (6th Edition) Listed
• ANSI/BHMA A156.31, Grade 1 (#E09371, #E09372, #E09373)
• NFPA-252 fire door conformant
• ASTM-E152 fire door conformant
• California Fire Marshall listed
• NFPA 80-07 compliant
• RoHS compliant
• Patent #6,390,520
• Patent pending

Frame application

• Metal
• Wood

Electrical

• .45 Amps @ 12 VDC continuous duty
• .25 Amps @ 24 VDC continuous duty
• PoE friendly

Standard Features

• Installs in metal or wood frames
• Separate base and decorative cover for easy adjustments
• Stainless steel construction
• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 1,000,000 cycles
• Field selectable fail safe/fail secure
• Dual voltage 12 or 24 VDC
• Horizontal adjustability
• Non-handed
• Internally mounted solenoid
• Accommodates up to 3/4" Pullman latch
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

HES 5000 Series Electric Strike.

US Lock Supply Stocks The HES 5000 In All Finishes & Options Ready To Ship.

Here Is An Installation Video.

Specifications

• UL 1034 burglary-resistant listed and suitable for outdoor use
• UL 294 (6th Edition) listed
• ANSI/BHMA A156.31, Grade 1
• MEA New York City accepted
• Patent #5,934,720

HES 5000 Series Catalog

Frame application

• Metal
• Wood

Electrical

• .24 Amps at 12 VDC/VAC
• .12 Amps at 24 VDC/VAC
• DC continuous duty/AC intermittent duty only

Standard Features

• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• Field selectable fail secure/ fail safe
• Dual voltage 12 or 24 VDC/VAC
• Non-handed
• Internally mounted solenoid
• Accommodates 1/2" - 5/8" latchbolt (5/8" with 1/8" door gap)
• Strike body depth 1-1/16"
• Plug-in connector
• Trim enhancer included
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor
• LBSM- Latchbolt Strike Moniter

  Finishes:

• 630 - Satin stainless steel
• 605 - Bright brass
• 606 - Satin brass
• 612 - Satin bronze
• 613 - Bronze toned
• 629 - Bright stainless steel
• BLK - Black
• Complete Pacs are only available in the 630 finish

Faceplate Options

• 501  (4-7/8" x 1-1/4", square corners & flat faceplate) For use with cylindrical locksets in ANSI metal jambs. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 501A  (4-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 502  (7-15/16" x 1-7/16", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 503  (6-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 504  (10" x 1-3/8", radius corners & flat faceplate) For use with cylindrical locksets. Four point mounting for wood installations. ANSI/BHMA Numbers: #E09321, #E09322, #E09323

HES 5200 630 and 5200C 630 Series Electric Strike. US Lock Supply Stocks The 5200 Series Electric Strike In All Finishes & Options Ready To Ship.

5200 Catalog

Standard Features

• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• Field selectable fail secure/ fail safe
• Dual voltage 12 or 24 VDC/VAC
• Non-handed
• Internally mounted solenoid
• Accommodates 5/8" - 3/4" latchbolt (3/4" with 1/8" door gap)
• Strike body depth 1-1/16"
• Plug-in connector
• Trim enhancer included
• Five year limited warranty

Faceplate Options

• 501  (4-7/8" x 1-1/4", square corners & flat faceplate) For use with cylindrical locksets in ANSI metal jambs. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 501A  (4-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 502  (7-15/16" x 1-7/16", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 503  (6-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. Includes universal mounting tabs. ANSI/BHMA Numbers: #E09321, #E09322, #E09323
• 504  (10" x 1-3/8", radius corners & flat faceplate) For use with cylindrical locksets. Four point mounting for wood installations. ANSI/BHMA Numbers: #E09321, #E09322, #E09323

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

Hes 7000 Series Electric Strike. US Lock Supply Stocks The 7000 Series In All Finishes & Options. Specifications

• UL 1034, burglary-resistant listed
• UL 294 (6th Edition) listed
• ANSI/BHMA A156.31, Grade 1 (791 and 792 options)
• ANSI/BHMA A156.31, Grade 2 (783S, 786S and 789S options)
• MEA New York City accepted
• Patent #5,484,180

Faceplate Options

• 791  (4-7/8" x 1-1/4") For use with Cylindrical locksets up to 5/8" throw. ANSI/BHMA Numbers: #E09322, #E09323
• 792  (7-15/16" x 1-7/16") For use with cylindrical locksets up to 5/8" throw. ANSI/BHMA Numbers: #E09322, #E09323
• Please Contact Us For Other Faceplates

Standard Features

• Stainless steel construction
• Tamper resistant
• Static strength 1,500 lbs. (791 and 792 options)
• Dynamic strength 70 ft-lbs. (791 and 792 options)
• Static strength 1,000 lbs. (783S, 786S and 789S options)
• Dynamic strength 50 ft-lbs. (783S, 786S and 789S options)
• Endurance 500,000 cycles
• Field selectable fail secure/fail safe
• Accommodates pre-load (fail secure only)
• Horizontal adjustment
• Non-handed
• Internally mounted solenoid
• Strike body depth 1-11/16"
• Plug-in connector
• Trim enhancer (791 and 792 options)
• Pocket adapter (786S and 789S options)
• Three year limited warranty

Hes 8300C Fire Rated Concealed for Cylindrical Locks Electric Strike . US Lock Supply Stocks The hes 8300C In All Options & Finishes Ready To Ship. 

Hes 8300C Catalog

The 8300C is designed for easy installation with no cutting on the frame required.  The 8300C has a concealed design, is fire-rated and works with cylindrical lockets with a 5/8" throw latchbolt. 

Specifications

• UL 10C, fire-rated, 3 hour (fail secure only)
• UL 294 (6th Edition) listed
• CAN4-S104 (ULC-S104) fire door conformant
• NFPA 80-07 compliant
• UL 1034 burglary-resistant listed and suitable for outdoor use
• ANSI/BHMA A156.31, Grade 1
• NFPA-252 fire door conformant
• ASTM-E152 fire door conformant
• UBC-7-2-94, Uniform Building Code
• Patent #5,934,720; 8,146,966; 8,157,302

 Frame application:-Metal, Wood 

Finishes:

630-Satin stainless steel 

Standard Features

• Falls within the guidelines for retrofit into fire-rated frames
• No cutting on frame required
• Vertical adjustability to accommodate door sag and misalignment
• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• Field selectable fail safe/fail secure
• Non-handed
• Accommodates 1/2"-5/8" cylindrical latchbolt (5/8" with 1/8" door gap)
• Strike body depth 1-1/16"
• Plug-in connector
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor Avail. 

US Lock Supply Stocks The Hes 9600 Windstorm Rated Electric Strike In Stock in All Finishes Ready To Ship. 

Hes 9600 Product Catalog

Hes 9600 Installation Instructions

hes 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latch. All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt and install. It is field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

Specifications

• ANSI 250.13-2003 Severe Windstorm listed
• Florida Building Code Approved (FL#14307)
• UL 1034 burglary-resistant listed and suitable for outdoor use
• UL 294 (6th Edition) listed
• ANSI/BHMA, A156.31 Grade 1 (#E09731, #E09732, #E09373)
• RoHS compliant
• Patent # 6,390,520

Finishes:

630-Satin Stainless Steel

606-Satin Brass(+$40)

612-Satin Bronze(+$40)

613-Oil Rubbed Bronze(+$40)

605-Bright Brass(+50)

629-Bright Stainless Steel(+$50)

Frame application

• Metal
• Wood

Electrical

• .45 Amps at 12 VDC continuous duty
• .25 Amps at 24 VDC continuous duty
• PoE friendly

Standard Features

• Installs in metal or wood frames
• Separate base and cover for easy adjustments
• Stainless steel construction
• Tamper resistant
• Static strength 2,000 lbs.
• Dynamic strength 120 ft-lbs.
• Endurance 1,000,000 cycles
• Field selectable fail safe/fail secure
• Dual voltage 12 or 24 VDC
• Horizontal adjustment
• Non-handed
• Internally mounted solenoid
• Accommodates up to 3/4" Pullman latch
• Five-year limited warranty

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

Model Numbers: 9600-630, 9600-629, 9600-612, 9600-613, 9600-606, 9600-605

Hes 8000 & 8000C Complete Pac With The 801 & 801A Faceplates Cylindrical Lock Electric Strike. US Lock Supply Stocks The 8000 Series In All Finishes & Options.

Specifications

• UL 1034 burglary-resistant listed and suitable for outdoor use
• UL 294 (6th Edition) listed
• ANSI/BHMA A156.31, Grade 1
• Patent #5,934,720; 8,146,966; 8,157,302

Hes 8300 & 8300C Catalog

 Frame application-Metal, Wood

Electrical

• .24 Amps at 12 VDC/VAC
• .12 Amps at 24 VDC/VAC
• DC continuous duty/AC intermittent duty only

 Standard Features

• No cutting on frame required
• Vertical adjustability to accommodate door sag and misalignment
• Tamper resistant
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance 500,000 cycles
• Field selectable fail safe/fail secure
• Dual voltage 12 or 24 VDC/VAC
• Non-handed
• Internally mounted solenoid
• Accommodates 1/2"-5/8" cylindrical latchbolt (5/8" with 1/8" door gap)
• Strike body depth 1-1/16"
• Strike body width decreased to 1-7/16" to increase frame compatibility
• Five year limited warranty

Hes 8300C Complete Pac Comes With The 801 & 801A Faceplate

Faceplate Options For 8300

• 801  (4-7/8" x 1-1/4") For use with cylindrical locksets in ANSI metal jambs. For use with latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
• 801A (4-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323 
• 801E (4-7/8" x 1-1/4", Extended lip) For use with extended lip for "knock-down" style frame installations. For use with cylindrical latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
• 802  (7-15/16" x 1-7/16") For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
• 803  (6-7/8" x 1-1/4", radius corners & flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum applications. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
• 805  (9" x 1-3/8", radius corners & flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Four point mounting for wood installations. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323

Optional Features

• LBM - Latchbolt monitor

Fail Secure, Industrial Grade 24VDC, 12VDC Electric Strike, Body Only, 3/4" Keeper

Downloadable content:

• 3000 Series Catalog (pdf)
• 3000 Mechanism Dimensions (pdf)
• 3000 Series Instructions (pdf)

12/24VAC/DC, Fail Secure

Faceplates Available

234 

234X-375

458

478

478X-375

Faceplates for the Trine 3000 Series Electric Strikes

Downloadable content:

• 3000 Series Catalog (pdf)
• 3000 Mechanism Dimensions (pdf)
• 3000 Series Instructions (pdf)

Downloadable content:

• 3000 Series Catalog (pdf)
• 3000 Mechanism Dimensions (pdf)
• 3000 Series Instructions (pdf)

Faceplates Available

234 

234X-375

458

478

478X-375

Downloadable content:

• 3000 Series Catalog (pdf)
• 3000 Mechanism Dimensions (pdf)
• 3000 Series Instructions (pdf)

234, 234X, 478 Faceplates, 478-CCFP Filler and 30LC Included in this product.

1/2" Surface mounted electric strike for Rim Panic Devices.

Enhanced 4850 Features:

• 1/2” thick Surface Mount electric strike comes with 1/4” and two (2) 1/16” Spacers plates -- the most versatile rim panic strike provides the flexibility of 6 different sizes!
• The electric strike Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw -- competitor backplates do not allow for this versatility.
• Comes with Trines Patented 6-Pin Anchoring System
• Contains a one piece locking mechanism with one Solenoid -- less parts mean less problems.
• Fail-safe/Fail-secure (field selectable).
• Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
• No cutting or worrying about voltage means you are always prepared.
• Everyday Low Current Draw

Enhanced 4850 Electrical Characteristics: (DC Only)   ^™

4100 Features:

• Grade 1 Electric Strike -- heavy duty construction, 1,000,000+ Life cycles -- 3,250+ lbs. Holding Force
• Four popular faceplates included -- including the 4 most used faceplates in the box makes specifying and installing easy Covers 90%+ of Cylindrical & Mortise Lock configurations (without deadbolt), plus faceplates can be kept & used to help accomodate for door sag.
• 1 - 3/8” Shallow backset -- the 4100 low profile electric strike can be used in 2” fire rated frames with 1/2” sheetrock ingress
• Low Current Draw -- .240 Amp at 12DC makes it very PoE Friendly 12 & 24DC :: 12 through 24 AC. All the low voltage and amperage flexibility you need
• The included CCTS covers the gap when retrofitting the HES® 1006, Folger Adams® 712/732, and Von Duprin® 6200 Series or even Trine EN Series strikes. No more ugly trim skirts. The CCTS always matches the faceplate finish.
• Why cut for a deadbolt 100% of the time when they are only used 5% of the time.
• Patented # US20110241361
• Cutout Specification A115.1 (with Slight Jamb Modification)

Standards:

• Class A, 3 Hour fire rated single door / frame configuration
• WH recognized for UL10C, Fire Tests of Door Assemblies
• UBC 7-2, Uniform building Code
• CAN4 S104, Standard Method for Fire Tests of Door Assemblies
• NFPA 252 - Issue: 1999/01/01 Standard Methods of Fire Tests of Door Assemblies
• NOTE: WH fire listing is void when using fail safe action.
• UL LISTED - 1034 Burglary Resistant
• UL294 (6th Edition) listed
• ANSI A156.5 - 1992 - 4-7/8" x 1-1/4" Fits

4100 Electrical Characteristics:

For new or replacement installations in wood or metal jambs. Use with cylindrical locksets, mortise locks without dead bolts, and mortise exit devices with up to 7/8” throw.

Weldable Gatebox

EN400 Features:

• Superior Strength -- Heavy duty 2,000+ lbs UL^® tested.
• Superior Life -- Durability of 1,000,000+ life cycles
• Superior Application - Outdoor UL^® rating allows the strike to be used anywhere - especially good for gates.
• Fail secure/Fail safe field reversible on DC units.
• Grade 1 Electric Strike -- Contains a one piece locking mechanism with one Solenoid -- less parts mean less problems.
• Left and Right handing is field reversible.
• Great for all high humidity environments like at marinas and pools. The go anywhere strike!

EN400 Specifications:

• UL® Listed 10C - Fire-rated - Class A, 3-hour, single swing door
• UL® Listed 1034 - Indoor/Outdoor Burglary Resistant
• UL294 (6th Edition) listed
• NYC MEA 79-01-E

EN Series Electrical Characteristicss:   

The 6 series centerline strikes are available in standard profile or low-profile options to accommodate different latch projections. This heavy-duty series combines several requested key features. Standard features include a multi-voltage single solenoid, selectable lock mode (no tools necessary), horizontal adjustment, and plug-in wire connectors. ¼” horizontal adjustment makes installations faster and easier. Plus, with the RCI 6 series there will be less pressure on installer’s strike inventory, because these RCI strikes do it all.

• Energy: 375mA Field-Selectable 12/24VDC, 12-24VAC (At 12VDC)
• Strength: 1,500lbf Static 70ft-lb Dynamic (Grade 1, 04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
• Endurance: 500,000 Cycles (Grade 1, 04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
• Mode: Field-Selectable Fail-Secure & Fail-Safe
• Monitoring: Optional Latch & Keeper Monitor Models Available
• Warranty: 3 Year Limited Warranty

Technical Drawing

RCI 0163 1/2" Rim

CATALOG

RCI 0162 3/4" Rim

The 6200 Series electric strikes are designed to use with mortise and cylindrical devices on single and pair doors. These heavy-duty strikes are UL 10C fire rated and factory configurable to fail safe or fail secure applications. Their stainless steel construction with integrated faceplate and smooth keeper movement help assure durability and reliability.

Available designs are suitable for a wide range of new construction applications and may also retrofit a number of competitive and older model Von Duprin electric door strikes.  

Application

• 17 model configurations available for cylindrical and mortise applications
• For doors with hollow metal, aluminum, or wood frame models

Simplicity

• Factory orderable to exact specification 
• 6 popular finishes available to suite with existing hardware
• Two-piece plug connectors are included for ease of installation and removal during strike servicing

Strength and durability

• Heavy-duty stainless steel construction
• 70 ft-lbs. dynamic strength
• 1,000,000 cycles endurance tested
• 5-year limited warranty

Product information

6200 Series electric strike data sheet
Von Duprin® electric security products and accessories catalog
Electronic Access Control catalog

Technical resources 

Guide to selecting an electric strike
Electric strikes application guide
System components quick cross reference guide
Fire, Life, Safety and Accessibility code reference guide
6200 Series installation instructions, templates or wiring diagrams

The 5100 Series electric door strike is highly configurable, providing a versatile and time-saving solution for interior and exterior doors. It is useful in most retail and commercial applications requiring electric strike use for cylindrical locks or dead latches. The 5100 Series strike can be easily converted in-field with dual voltage and selectable power fail mode to suit the need. An adjustable keeper and three faceplates simplify fit to frame. 

The 5100 Series is compatible with Schlage, Falcon and many other manufacturers' cylindrical locks with up to 5/8" throw, as well as many aluminum narrow stile deadlatches. 

Application

• Designed for cylindrical lock and dead latch applications
• For interior or exterior doors with hollow metal, aluminum, or wood frames

Versatility

• 12 in-field configurations 
• Three faceplates standard in every box
• Field-selectable 12/24 VDC
• Non-handed, internal solenoid design
• Field-selectable power failure mode
• Adjustable keeper improves fit on tight door preps

Strength and durability

• 1000 lbs. static strength
• 70 ft-lbs. dynamic strength

Opening

• Single doors with wood, hollow metal or aluminum frames
• Cylindrical lock and dead latch applications

Throw

• 1/2" to 5/8"

Power

• Field-selectable voltage and power fail mode
• 12 VDC continuous duty at 0.38 Amp
• 24 VDC continuous duty at 0.19 Amp

Dimensions

• See the 5100 Series data sheet for dimensions and wiring.
• 3 faceplates:
• Square corner 4-7/8” x 1-1/4”
• Round corner 4-7/8" x 1-1/4”
• Wood application 7-15/16" x 1-7/16” 
• 1-11/16" backbox depth

Available finishes

• BHMA 689 / US SP28 aluminum
• BHMA 622 / US19 flat black
• BHMA 695 / US SP313 dark bronze

Options

• 12 VAC to 12 VDC rectifier
• 24 VAC to 24 VDC rectifier

Downloads

• 5100 Series electric strike data sheet
• Von Duprin® electric security products and accessories catalog
• Electronic Access Control catalog
• Guide to selecting an electric strike
• Electric strikes application guide
• System components quick cross reference guide
• Fire, Life, Safety and Accessibility code reference guide
• 5100 Series installation instructions, templates or wiring diagrams

Overview

The 6300 Series electric door strike is designed for installation speed and convenience. It can be used with most rim exit devices as a no-cut solution for storefronts and other challenging applications. Suitable for single or pair doors with a mullion, the 6300 Series is fire-rated and made of heavy-duty, stainless steel. Standard features include plug-in voltage connectors and internal solenoid for a "no-cut" quick installation, indoors or out.  

The 6300 Series is designed for use with the Von Duprin 98/99 Series, but can be used with Falcon and most other manufacturers' rim exit devices. 

Application

• Designed for use with rim exit devices
• For interior or exterior doors with hollow metal, aluminum, or wood frames
• Simplicity

Surface mounted 

• Requires no alteration or cutting to existing frame 
• Field-selectable voltage 12VDC or 24VDC 
• Non-handed, internal solenoid design
• Plug-in voltage connectors included for easy installation and removal during strike servicing

Strength and durability

• Heavy-duty stainless steel construction
• 1500 lbs. static strength
• 70 ft-lbs. dynamic strength

Opening

• Single doors or pair with mullion on wood, hollow metal or aluminum frames

Lockset 

• Rim exit devices 

Throw

• 3/4" latch
  

Power

• 24 VDC standard with 12 VDC and rectifier kit conversion to VAC optional
• 12 VDC continuous duty at 0.5 Amp
• 24 VDC continuous duty at 0.24 Amp

Dimensions

• See 6300 Series data sheet for dimension and wiring diagrams.
• 9" L x 1-3/4"W x 3/4"D

Available finishes

• BHMA 630 Satin stainless steel

Options

• 12 VAC to 12 VDC rectifier
• 24 VAC to 24 VDC rectifier
• Entry buzzer

Downloads

• 6300 Series electric strike data sheet
• Von Duprin® electric security products and accessories catalog
• Electronic Access Control catalog
• Guide to selecting an electric strike
• Electric strikes application guide
• System components quick cross reference guide
• Fire, Life, Safety and Accessibility code reference guide
• 6300 Series installation instructions, templates or wiring diagrams

Overview

The 6400 Series electric door strike is designed to be highly configurable to fit almost any mortise or cylindrical lock, including those with offset latches. It provides a fail-secure only solution for fire-rated openings. 

The strike allows installers to insert and lock in place the deadbolt keeper, or the plug and dead latch ramp, anywhere within its 3-1/8” vertical opening to suit latchbolt position and functional needs Combined with horizontal adjustability, this makes the easy-to-install 6400 Series a good fit for installations where misalignment or a tight fit may be a problem. 

Application

• Fits cylindrical and nearly any mortise lock
• For interior or exterior doors with hollow metal, aluminum, or wood frames
• 3-hour fire-rated to UL 10C (fail secure only)

Versatility

• Modular design is configurable to functional needs 
• Two faceplates standard 
• Field-selectable 12/24 VDC or 12/24 VAC
• Non-handed, internal solenoid design
• 1/8" horizontal with a range of vertical adjustments for misaligned doors & frames

Strength and durability

• Heavy-duty stainless steel construction 
• 1500 lbs. static strength
• 70 ft-lbs. dynamic strength

Opening

• Single doors with wood, hollow metal or aluminum frames
• Mortise locks, cylindrical locks and dead latch applications 
• 1" deadbolt (as night latch only, no release)

Throw

• 3/4" latch

Power

• Field-selectable voltage
• 12 VDC continuous duty at 0.375 Amp
• 24 VDC continuous duty at 0.19 Amp
• 12/24 VAC intermittent duty at 0.28-0.565 Amp

Dimensions

• See the 6400 Series data sheet for dimensions and wiring diagrams.
• Standard 4-7/8" faceplates (one each for offset and centerline locks)
• 1-3/4" backbox depth

Available finishes

• BHMA 630 satin stainless steel

Part options

• Plug-in latchbolt monitor
• 12 VAC to 12 VDC rectifier
• 24 VAC to 24 VDC rectifier
• Entry buzzer

Downloads

• 6400 Series electric strike data sheet
• Von Duprin® electric security products and accessories catalog
• Electronic Access Control catalog
• Guide to selecting an electric strike
• Electric strikes application guide
• System components quick cross reference guide
• Fire, Life, Safety and Accessibility code reference guide

Product Features

• Accommodates up to 5/8" latchbolt
• Fully concealed installation
• Fits standard ANSI 4-7/8" strike cutout
• UL Listed
• Motorized, no solenoids
• Latch status sensor is standard (SPDT)
• Also available in Oil Rubbed Bronze (US10B)
• Maintains deadlatch function at all times
• No cutting or altering of the jamb required
• Continuous duty
• Releases under preload

10STRIKECUV
Mode Fail Safe, Fail Secure
Voltage 12 VDC 24 VDC
Duty Continuous Continuous
Amps † 0.300 0.150
Sound Silent Silent
Static / Dynamic Strength 1000 lbs / 70 lbs
Endurance 250,000 cycles (UL tested) / 1,000,000 cycles (factory tested)
Latch Throw 9
⁄16” (15 mm max)
Standards Compliance UL 294, UL 1034, UL listed

UL / ULC Listed Universal Cylindrical Electric Strike, 12/24 VDC/VAC, Continuous / Intermittent Duty, Silent or Buzz, Includes 3 Faceplates (Aluminum , Hollow Metal and Wood Frame Installations)3

Grade 1 Electric Strike, Fail Safe/Fail Secure, 12/24 AC/DC, Oil Rubbed Bronze, Satin Stainless Steel

Grade 1 Electric Strike, 12/24 VDC/AC, {3} Hour Fire Rated, Fail Safe/Fail Secure, 3/4" Latch Projection, Latch Monitoring, For Use with Mortise and Cylindrical Locks, Satin Stainless Steel Finish

The low, versatile profile CS Series of electric strikes are designed for use with cylindrical locksets and select mortise locksets without deadbolt for both metal and wood door frames. 

• Simple and easy field selectable fail-safe/fail-secure
• Field selectable 12/24 VDC
• Two face plates and trim piece included for improved appearance
• Voltage spike suppressor included
• US10B faceplates available
• CS450 series accepts latchbolt up to 9/16”
• CS750 series accepts latchbolt up to ¾”
• Latch bolt monitoring available

• UL1034
• UL294
• Static strength of 1500 lbf., UL certified
•  Dynamic strength of 70 ft.lbf., UL certified
• 250,000 cycles, UL certified (non-LBM models)

Product information

• Locknetics Access Control Sell Sheet
• Competitive Cross Reference Guide
• Locknetics Full Line Catalog

Technical resources

• Installation instructions
• Manuals & user guides

The RS210 and RS310 rim strikes deliver the same functionality as the previous RS200 and RS300 models with new design elements including a stiffer cover for enhanced performance and concealed mounting holes for cleaner surface aesthetics.

The RS Series of surface mounted electric rim strikes are designed with endurance and flexibility. Available to accommodate rim exit devices with a 1⁄2" or 3⁄4" throw pullman latchbolt and multiple spacers included for superior installation. 

• Simple and easy field selectable fail-safe/fail-secure, non-fire rated models
• Field selectable 12/24 VDC
• Four attachment points to the frame provide for extra durability.
• Sleek cover case design
• US32D or US10B finish available
• RS200 series accepts 1/2" throw Pullman latchbolt
• RS300 series accepts 3/4" throw Pullman latchbolt
• Fire rated version available for RS300 series

• UL1034
• UL294
• UL10C on select models
• Static strength of 1500 lbf., UL certified
• Dynamic strength of 70 ft.lbf., UL certified
• 250,000 cycles, UL certified 

Product information

Locknetics Access Control Sell Sheet

Competitive Cross Reference Guide

Locknetics Full Line Catalog

Technical resources

Installation instructions

Manuals & user guides

The RS210 replaces the RS200.

The RS210 and RS310 rim strikes deliver the same functionality as the previous RS200 and RS300 models with new design elements including a stiffer cover for enhanced performance and concealed mounting holes for cleaner surface aesthetics.

The RS Series of surface mounted electric rim strikes are designed with endurance and flexibility. Available to accommodate rim exit devices with a 1⁄2" or 3⁄4" throw pullman latchbolt and multiple spacers included for superior installation. 

• Simple and easy field selectable fail-safe/fail-secure, non-fire rated models
• Field selectable 12/24 VDC
• Four attachment points to the frame provide for extra durability.
• Sleek cover case design
• US32D or US10B finish available
• RS210 series accepts 1/2" throw Pullman latchbolt
• RS310 series accepts 3/4" throw Pullman latchbolt
• Fire rated version available for RS300 series

• UL1034
• UL294
• UL10C on select models
• Static strength of 1500 lbf., UL certified
• Dynamic strength of 70 ft.lbf., UL certified
• 250,000 cycles, UL certified 

Product information

Locknetics Access Control Sell Sheet

Competitive Cross Reference Guide

Locknetics Full Line Catalog

Technical resources

Installation instructions

Manuals & user guides

Product Catalog

DORMA Solutions
• 1500 lb (680 kg) holding force
• Modular design allows compatibility with most locks without
having to order special faceplates
• Adjustable dead bolt keeper and deadlatch ramp
• Accommodates 3/4" (19.1 mm) latch projection
• Horizontal adjustment (up to 1/4" or 6.4 mm) relieves sideload pressure, ensuring proper latch alignment
• Faceplate included for centerline latch entry
• Unique sliding shim design for up to 1/8" ( 3.2 mm)
horizontal adjustment for misaligned frames
• Vertical adjustability of strike for precise positioning of lockset
• Accommodates up to 1" dead bolt*
• Field-selectable voltage input—12 or 24 VDC or 12–24 VAC
• Anti-tamper security screws
• All installation drivers included
• Optional latch monitor kit
• Low current draw (.19 A @ 24 VDC)
• Plug-in wire connector
• Trim plate included
• Non-handed
• 630 stainless steel finish
*Night-latch function only, bolt will not release.
Listings & Approvals
• UL/CUL listed under their continuing reinspection programs
and conforms to standards UL 1034 and CVXY for burglary
resistant electric door strikes, UL10C GXAY for positive
pressure fire testing, 3 hour rated
• ANSI/BHMA 156.31, Grade 1 pending
• CSFM pending
• Contributes to U.S. Green Building Council, LEED® MR
Credits 2.1, 4.1, 4.2, and 5.1
T

The DORMA ES96F fire-rated offset and centerline latch entry electric strike combines strength and convenience in an attractive design. The unique saw-tooth adjustment locator design of the ES96F allows the installer to move the dead bolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There is no need to order special faceplates—the strike can be adjusted to work with any mortise lock. Everything needed is in the box, including a separate faceplate for centerline latch entry. For easy installation, the strike's shim design adjusts vertically on the keeper to align with any latch location, providing up to 1/8" horizontal adjustment. Also included are a trim plate for inconsistent frame cuts, a hands-free adhesive backed template, and all the needed drivers to install the strike. The plug-in latch monitor switch option can be added in the field if monitoring is specified after installation

The 1006 series is the strongest and most versatile electric strike available. The dual interlocking plunger design and heavy duty stainless steel construction, enables it to exceed every standard developed for electric strikes.

Product Features

• Stainless steel construction
• Tamper resistant
• Static strength 2,500 lbs. (fail secure)
• Dynamic strength 350 ft-lbs. (fail secure)
• Endurance 1,000,000 cycles
• Fail secure (standard)
• Non-handed
• Accommodates up to 1" deadbolt
• Plug-in connector
• Full keeper shims for horizontal adjustment
• Trim enhancer
• Dual voltage 12 or 24 VDC continuous duty
• Internally mounted solenoid