DORMA Solutions
1500 lb (680 kg) holding force
Modular design allows compatibility with most locks without
having to order special faceplates
Adjustable dead bolt keeper and deadlatch ramp
Accommodates 3/4" (19.1 mm) latch projection
Horizontal adjustment (up to 1/4" or 6.4 mm) relieves sideload pressure, ensuring proper latch alignment
Faceplate included for centerline latch entry
Unique sliding shim design for up to 1/8" ( 3.2 mm)
horizontal adjustment for misaligned frames
Vertical adjustability of strike for precise positioning of lockset
Accommodates up to 1" dead bolt*
Field-selectable voltage input—12 or 24 VDC or 12–24 VAC
Anti-tamper security screws
All installation drivers included
Optional latch monitor kit
Low current draw (.19 A @ 24 VDC)
Plug-in wire connector
Trim plate included
Non-handed
630 stainless steel finish
*Night-latch function only, bolt will not release.
Listings & Approvals
UL/CUL listed under their continuing reinspection programs
and conforms to standards UL 1034 and CVXY for burglary
resistant electric door strikes, UL10C GXAY for positive
pressure fire testing, 3 hour rated
ANSI/BHMA 156.31, Grade 1 pending
CSFM pending
Contributes to U.S. Green Building Council, LEED® MR
Credits 2.1, 4.1, 4.2, and 5.1
T
The DORMA ES96F fire-rated offset and centerline latch entry electric strike combines strength and convenience in an attractive design. The unique saw-tooth adjustment locator design of the ES96F allows the installer to move the dead bolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There is no need to order special faceplates—the strike can be adjusted to work with any mortise lock. Everything needed is in the box, including a separate faceplate for centerline latch entry. For easy installation, the strike's shim design adjusts vertically on the keeper to align with any latch location, providing up to 1/8" horizontal adjustment. Also included are a trim plate for inconsistent frame cuts, a hands-free adhesive backed template, and all the needed drivers to install the strike. The plug-in latch monitor switch option can be added in the field if monitoring is specified after installation