Rixson 1351 Gate Closer
The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.
The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.
Application
• Interior Doors
• Weight to 250 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Pivot Set
Center hung pivots are door hanging means only. To close doors, see floor closer sections.
• Standard top pivot 320 included
• Bottom pivot mounts directly to floor
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
Black Suede Powder Coat BSP |
White Suede |
Model 128-3/4 Center Hung Pivot Set Installation Instructions
Manufacturer | Rixson |
SKU | 370 626 |
--- | --- |
Installation | — |
Origin | — |
Unit of Measure | Each |
Base Material | Brass or Bronze |
Limited Warranty | 2 Years |
Finish | |
Finish |
|
Finish Description | Satin Chrome |
3/4" Offset Pivot
Application
• Exterior or Interior Doors
• Weight to 600 lbs.*
• Door Width up to 4'0" (1219mm)
• Handed
• Standard-Duty Pivot Set
* Door size & weight guidelines are determined using the appropriate number of intermediate pivots
• Standard top pivot 180 included
• M19 intermediate pivot required (order separately)
• Bottom pivot mounts directly to floor
• Uses same arm and cap as 27 floor closer
• Available for fire door assemblies up to three hours (ferrous material) – specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
Black Suede Powder Coat BSP |
White Suede |
Model 147, 3/4" Offset Pivot Set Installation Instructions
Model 147, 3/4" Offset Pivot Set Template
Model F147, 3/4" Offset Pivot Set Installation Instructions
Model F147, 3/4" Offset Pivot Set Template
Model 147, 1-1/2" Offset Pivot Set Installation Instructions
Model 147, 1-1/2" Offset Pivot Set Template
Model F147, 1-1/2" Offset Pivot Set Installation Instructions
• Not load-bearing
• Maintains door alignment
• Aids in installing floor closers and bottom pivots
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base metal
• 3/4" (19mm) offset
• Available for 1-1/2" (38mm) offset
• Available for fire door assemblies (ferrous material) – specify FM19
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• Door edges must be beveled in 1/8" in 2"
• Furnished with wood and machine screws
Model M19, 3/4" Offset Intermediate Pivot Installation Instructions
Model M19, 3/4" Offset Intermediate Pivot Template
Model M19, 1-1/2" Offset Intermediate Pivot Installation Instructions
Model M19, 1-1/2" Offset Intermediate Pivot Template
Application
• Interior Doors
• Weight to 300 lbs.*
• Door Width up to 3'6" (1067mm)
• Handed
• Light-Duty/Light Weight Pivot Set
* Door size & weight guidelines are determined using the appropriate number of intermediate pivots
• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into floor
• Available for fire door assemblies up to three hours – specify F117. Intermediate pivot required by UL. Specify FM19, (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 150 lbs) for doors with cladding or frame molding.
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
Black Suede Powder Coat BSP |
White Suede |
|
Model 117, 3/4" Offset Pivot Set Installation Instructions
Model 117, 3/4" Offset Pivot Set Template
Model 117, 1-1/2" Offset Pivot Set Installation Instructions