Application
• Interior Doors
• Weight to 250 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Pivot Set 

Center hung pivots are door hanging means only. To close doors, see floor closer sections.

• Standard top pivot 320 included
• Bottom pivot mounts directly to floor
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 128-3/4 Center Hung Pivot Set Installation Instructions

Model 128-3/4 Center Hung Pivot Set Template

3/4" Offset Pivot

Application
• Exterior or Interior Doors
• Weight to 600 lbs.*
• Door Width up to 4'0" (1219mm)
• Handed
• Standard-Duty Pivot Set 

* Door size & weight guidelines are determined using the appropriate number of intermediate pivots

• Standard top pivot 180 included
• M19 intermediate pivot required (order separately)
• Bottom pivot mounts directly to floor
• Uses same arm and cap as 27 floor closer
• Available for fire door assemblies up to three hours (ferrous material) – specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 147, 3/4" Offset Pivot Set Installation Instructions

Model 147, 3/4" Offset Pivot Set Template

Model F147, 3/4" Offset Pivot Set Installation Instructions

Model F147, 3/4" Offset Pivot Set Template

Model 147, 1-1/2" Offset Pivot Set Installation Instructions

Model 147, 1-1/2" Offset Pivot Set Template

Model F147, 1-1/2" Offset Pivot Set Installation Instructions

Model F147, 1-1/2" Offset Pivot Set Template

Application
• Full Mortise
• Handed

• Not load-bearing
• Maintains door alignment
• Aids in installing floor closers and bottom pivots
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base metal
• 3/4" (19mm) offset
• Available for 1-1/2" (38mm) offset
• Available for fire door assemblies (ferrous material) – specify FM19
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• Door edges must be beveled in 1/8" in 2"
• Furnished with wood and machine screws

Pivots & Pivot Sets Catalog

Model M19, 3/4" Offset Intermediate Pivot Installation Instructions

Model M19, 3/4" Offset Intermediate Pivot Template

Model M19, 1-1/2" Offset Intermediate Pivot Installation Instructions

Model M19, 1-1/2" Offset Intermediate Pivot Template

Application
• Interior Doors
• Weight to 300 lbs.*
• Door Width up to 3'6"  (1067mm)
• Handed
• Light-Duty/Light Weight Pivot Set 

* Door size & weight guidelines are determined using the appropriate number of intermediate pivots

• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into floor
• Available for fire door assemblies up to three hours – specify F117. Intermediate pivot required by UL. Specify FM19, (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 150 lbs) for doors with cladding or frame molding.
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 117, 3/4" Offset Pivot Set Installation Instructions

Model 117, 3/4" Offset Pivot Set Template

Model 117, 1-1/2" Offset Pivot Set Installation Instructions

Model 117, 1-1/2" Offset Pivot Set Template

The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.