"Excellent service, excellent price, excellent timing! Huge help in crazy construction business environment! Five stars! Would suggest us lock supply to anybody, no doubt about it." Regency Glass.                                           

Best Used In Medium To High Traffic Doors

US Lock Supply Stocks The Norton 1601 Closer In All Options & Finishes Ready To Ship Free On Orders Over $189.  Ideal for use with aluminum storefront doors and frames, these closers have a history of proven quality and tradition.

1601 Arm Options:

The 1600BC/1601 Series Door Closers are designed to fit almost any application and are the choice of engineers worldwide. Ideal for use with aluminum storefront doors and frames, these closers have a history of proven quality and tradition.

Norton 5700 Series is the latest generation of power door operators. Low energy door operators were once considered a necessity only for those with physical challenges. Today, due to the population?s busy lifestyles, the convenience of ?hands-free? door opening is more popular than ever. The patented design of LEO? is based on ease and simplicity. LEO installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton

Features

Non-Handed

Ease of installation and setup - Simple instructions

Application versatility & ease of adjustment - Push or pull side mounting units available

Operates as mechanical surface closer during close cycles or when door is opened manually or if power is turned off - Quiet operation, acceptable for fire-rated doors, spring force provides the feel of a normal manual door closer, door can be opened manually if desired

Power Size: Multi-Sized Door Closer Adjustable through the power range of sizes 3 through 6.

Separate and independent, latch, sweep and backcheck intensity valves

Sweep Speed: Allows adjustment of door speed from the door's full open position down to approximately 10from the closed position.

Latch Speed: Allows adjustment of door speed from approximately 10down to the door?s fully closed position.

Backcheck: Provides control of the door in the opening cycle, beginning at approximately 75of door opening. It slows/cushions the door opening, when the door is forcibly opened beyond its pre-adjusted opening speed limits.

Unit Activation Options - Wall switches, Motion sensor, Radio frequency device

End-User On/Off Switch

Hold Open options - 0-30 seconds (5 seconds minimum required for ADA and ANSI A156.19)

Obstruction Detection - Motor stops if door is obstructed during an opening, door closes under manual spring force.

"Push and Close" Allows the operator to skip the hold open time when it is not necessary or required Adjustable door sensitivity

Overload Safety Shut-Off After two minutes of receiving a door activation signal, the inverter will time out and close the door Prevents motor/inverter damage

Motor Start Delay for Locking Hardware 0-5 second delay to allow locking hardware to release first

2-year warranty (refer to current Nortonprice book for terms & conditions)

Model: Norton, 5710, 5730, 5740

ADAEZ PRO COMPLETE: MODEL 5845 (PUSH AND PULL)

» Bundles all the configurations of the ADAEZ PRO and ADAEZ PRO PLUS models into one easy to stock package

» Right or left hand doors

» Push and pull side mounting hardware

» Black and aluminum finish covers

» Mounting hardware for virtually any door and frame

» 24VDC plug-in transformer kit for continuous automatic use applications

FEATURES

» Regenerative drive or continuous duty operation

» Non-handed

» 5° door opening

» Push and pull side mounting

» Push-and-Go (ADA1015P Kit must be connected)

» Power Close (ADA1015P Kit must be connected)

» Radio Frequency stainless steel push buttons

» Integral RF receiver

» Shock absorbing arm

» 693T (black) and 689 (aluminum) covers

» 24VDC input port » ADA1015P hardware kit

» Built-in ON/OFF Switch

» Auxiliary activation input port

» Maximum door width - 48"

» Maximum door weight - 250 lbs

» Patented Auto-Tune feature ensures safety and compliance with A156.19 code

» 2 year limited warranty

CERTIFICATIONS

» ANSI/BHMA A156.19 certified

» ETL tested to UL/cUL standard for automatic doors on fire & smoke barrier doors

» Complies with requirements for Americans with Disabilities Act (ADA)

» UL10c 90-minute positive pressure fire rating

» Manufactured in an ISO 9001 and ISO 14001 certified facility

» Verified by GreenCircle to offer these energy savings as compared to similar products:

› 5800 Series ADAEZ® (plug-in) – 91% efficiency

› 5800 Series ADAEZ® (wireless) – 100% efficiency

The Norton 6300 Series Low Energy Operator offers a broad set of intelligent functions, such as power close, latch assist and obstruction detection to safely secure a variety of moderate to high traffic openings. A unique design with one of the slimmest profiles available allows the 6300 to blend more seamlessly with the frame while fitting challenging applications with minimal header space. A modular design, simple controls, and new wifi interface via a mobile device make for easy installation and setup.

Door Control (interior) (exterior) closing force shall be adjustable to ensure adequate closing control. Door Operator shall simulate conventional door closer opening and closing forces unless the power operator motor is activated. Door Operator shall have electronic backcheck to cushion the door speed if door is opened violently. [(Door Operator shall be AUTOMATICALLY ACTIVATED by either a slight push or pull in the direction of opening swing - Push and Go.) (Door Operator shall be SELECTIVELY ACTIVATED by external initiating device, i.e. wall switch, etc.) (Door Operator shall be both AUTOMATICALLY ACTIVATED and SELECTIVELY ACTIVATED.)] Operator shall have selectable power close to provide additional closing force to overcome conditions that may prevent door from latching. Unit shall have delay switches for motor activation, electric lock interfacing, and hold open time. Units shall interface with latch assist exit devices or similar products and have 24VDC @ 1.3A maximum (less accessories) output for connection of electric strike, lock, radio frequency receiver, etc. Unit shall have a three-position Selector Mode Switch that will permit the unit to be switched "ON" to monitor for function inputs, switch to "H/O" for infinite hold open function or switched "OFF" which will disable function inputs allowing unit to be used as a manual door closer. Unit shall be U.L. Listed for automatic closing door. The Unit shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA). Unit shall be certified by BHMA to meet A156.19 requirements. Unit shall meet UL325/991, UL10C standards.

689 Aluminum

690 Statuary Bronze

BSP Black Suede Powder Coat

WSP White Suede Powder Coat

Downloads

US lock supply Stocks The Norton 8501 Door Closer Ready To Ship For Free On Orders Over $189. Order Today!

 The 8501 is common in Schools, Office Buildings, Hospitals, Storefront Doors & High Traffic Doors.

The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve adjustment and a complete range of arm and cover options, this closer can meet virtually any application challenge.

Norton 8000 Catalog

Norton 8501 Installation Instructions

Features • Exceeds 15 million cycles (witnessed and verified by UL) • Adjustable spring sizes 1 through 6 • Tri-Style® packaging standard (regular arm, top jamb and parallel arm mounting) • Non-handed • Staked valves • Cast aluminum body • Rack and pinion design • 1-1/4" (32mm) diameter piston • 5/8" (16mm) diameter pinion journals • 2-1/8" (54mm) projection (standard covers) • All standard arm applications (with slim, full or metal covers) allow doors to swing 180 degrees, conditions permitting • Full size template • Metal, architectural plastic or architectural metal covers (8501 only) • Lead lined metal cover - suffix MLL • Application specific arms: Regular (S), Top Jamb (JS) and Parallel (P) • Heavy-duty arms; Regular Rigid, Parallel Rigid, CloserPlus®, CloserPlus Spring™, Unitrol® • Slide Tracks: push or pull side mounting • 25-year limited warranty

Functions • Standard, separate and independent, latch, sweep and backcheck intensity valves • Delayed action

1601 Top Jamb-For efficiency reasons this application provides the best alternative to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application. It requires a top rail on the door of just 2-1/8" (54mm). This application provides the best door control for doors in exterior walls that swing out of a building. The entire door closer and arm assembly project from the frame, similar to the regular arm application, where the matters of appearance and malicious abuse can be of concern. Consideration must be given to depth of the frame reveal.

Grade 1 Parallel Arm Door Closer, Push Side, Unitrol Arm, Size 1 to 6, For 33" to 41" Doors, Plastic Cover, Aluminum Painted Finish, Non-Handed

Unitrol® Arm
Can be used for either parallel arm or top jamb applications. Unitrol arms combine the features of a double lever arm overhead door
stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads to a minimum. The Unitrol uses a
compression spring buffer at the soffit plate/arm shoe that will absorb 30 lbf. of force, 5° prior to the door’s dead stop. Coupled with the
door closer’s backcheck feature, this arm provides the most controlled stop available with a surface door closer.
For parallel arm applications there are three different length arm assemblies. Each length is designed for a specific range of door widths
to provide precise door control. This further lessens the dead stop impact on the door’s hinges/pivots.