Touchless Actuator Available to Be Used With The ED900

 

Low Energy Operator

 

Employing an innovative electromechanical drive and a state-of-the-art microprocessor motion control system, the ED900 is DORMA's most advanced low-energy swing door power operator. The operator is exceptionally quiet, safe, and easy to use.

 

Low energy operator ANSI/BHMA Grade 1 certified.

• Innovative technology
• Advanced power assist
• Fully ADA compliant
• Small footprint
• Advanced features

Advanced power assist

 

When operated manually, the ED900 demands little physical effort. Advanced power assist through the entire opening cycle makes even the heaviest-rated door feel light.

 

Fully ADA compliant

 

The operator is especially helpful for children, the elderly, persons with disabilities, or those carrying objects or pushing carts. This fully ADA-compliant device opens doors at precisely controlled speeds and forces, assuring safety for all users.

 

Advanced features

 

The ED900 also includes a blow-open feature for smoke ventilation (per NFPA code 92B), permanent hold-open, and an onboard power supply delivering 1.5 amps @ 24-volt DC, which eliminates the need for a secondary power supply. It includes twelve programmable options to accommodate even the most challenging door installations.

 

Small footprint

 

In addition, the ED900 low energy operator boasts the smallest footprint in the industry, up to 65 percent smaller than some other manufacturers' operators.

Type	Surface
Technology	Electromechanical
Mounting Location	Push Side
Mounting Style	Top Jamb
Hold Open	Yes
Hold Open Type	Electric
Arm Type	Double Lever Arm w/Mech Stop
Hand	Non-Handed
Degree Swing	110 Deg. Powered, 180 Deg. Manual
Back Check	Adjustable
Delay	Yes
Cover	Metal
Door Size	48" Maximum
Door Weight	220 lbs Maximum
Reveal Size	0 - 8" Reveal
Voltage	115 VAC, 50/60 Hz
Aux Power	24VDC filtered, 1.5 A Maximum
Relay	Form C
Physically Handicapped	Yes
Product Type	Door Operators

Yale's 3000 Series architectural door closers offer the perfect combination of reliability, appearance and durability in today's market. With features such as staked valves, self-drilling and tapping screws, rack and pinion design, precise valve adjustment, and a complete range of arm and cover options, the Yale 3000 can meet virtually any application challenge.

 

Features

• ADA compliant
• Exceeds 25 million cycles
• Cast aluminum body
• Adjustable spring sizes 1 through 6
• Tri-packed: regular, parallel, and top jamb mounting
• Non-handed
• Staked valves
• Rack and pinion design
• Separate and independent latch, sweep, and backcheck intensity valves

• Catalog
• Installation Instructions
• Templates

Yale's 3000 Series architectural door closers offer the perfect combination of reliability, appearance and durability in today's market. With features such as staked valves, self-drilling and tapping screws, rack and pinion design, precise valve adjustment, and a complete range of arm and cover options, the Yale 3000 can meet virtually any application challenge.

 

Features

• ADA compliant
• Exceeds 25 million cycles
• Cast aluminum body
• Adjustable spring sizes 1 through 6
• Tri-packed: regular, parallel, and top jamb mounting
• Non-handed
• Staked valves
• Rack and pinion design
• Separate and independent latch, sweep, and backcheck intensity valves

• Catalog
• Installation Instructions
• Templates

Yale's 4400 Series Institutional Door Closers offer customers the ideal combination of superior performance, quality and strength. With new pinion and piston materials, improved valve design, and staked valves, the closers are the most efficient, dependable closers in the industry. The addition of a size 1-6 spring for the 4400 also simplifies the process of specifying and ordering product.

Features

• ANSI/BHMA Grade 1 Certified
• UL/cUL listed for use on fire rated doors
• Manufactured in an ISO 9001 facility
• Exceeds 25 million cycles
• Cast aluminum body
• Adjustable spring sizes 1 through 6 (ADA compliant)
• Tri-packed: regular, parallel, and top jamb mounting
• Rack and pinion design
• Staked valves
• Separate and independent latch, sweep, and backcheck intensity valves
• Non-handed
• Self-drilling screws
• 30 year limited warranty

• Catalog
• Installation Instructions
• Template

Yale 5800 Series Cast Iron Door Closers are ideal for retrofit and new construction applications where strength and durability are required at an economical price. The 5800 Series features rugged construction, adjustments for backcheck, closing, and latch speed, rack and pinion operation and a variety of arm options.

Features

• ANSI/BHMA Grade 1 Certified
• Adjustable spring sizes 1-6
• Non-handed
• Cast iron
• Tri-packed: regular, parallel or top jamb mounting
• Full plastic cover
• Spring power adjustment
• Hold open and heavy-duty arm configurations
• Sleeve nuts included with all models

• Catalog
• Installation Instructions
• Templates
• Sell Sheet

Yale 2700 Series Architectural Door Closers are ideal for commercial applications where ease of use, installation and aesthetics are required at an economical price. The 2700 Series features rugged construction, adjustments for backcheck, closing and latch speed, and rack and pinion operation.

Features

• Adjustable spring sizes 1-6 
• Non-handed 
• Aluminum 
• Tri-packed: regular, parallel or top jamb mounting 
• Full plastic cover 
• Hold open and heavy-duty arms available 
• Sleeve nuts furnished standard with all models 
• Optional fasteners: Thrubolts and grommet nuts

• Catalog
• Installation Instructions
• Templates
• Sell Sheet

Yale® 51 Series Closers are designed to fit almost any application and are the choice of engineers worldwide. They are ideal for use with aluminum store front doors and frames, yet they also complement wood or metal door installations. Non-handed, the 51 series is available as multi-sized units and offers tri-packed packaging on standard non-hold open and hold open closers.

Features

• Exceeds 12 million cycles
• Non-handed
• Tri-packed (regular arm, top jamb and parallel arm installations)
• Rack and pinion design
• Cast aluminum body
• 1-3/8" diameter piston
• 5/8" diameter pinion journals
• Standard, separate and independent latch, sweep and backcheck intensity valves
• 2-7/8" projection
• All standard arm applications allow doors to swing 180 degrees, conditions permitting
• Warranty: 30 years limited
• Staked valves

• Catalog
• Installation Instructions
• Templates

COMPACT Low Energy Auto Operator Module Kit (Conversion Kit Only), Gearmotor Assembly, Mounting Plate and Screws, Plastic Cover, Power Supply, Door Loop, 30' Copper Wire, Aluminum Painted Finish, Dark Bronze Finish

 

Unit of Measure	Each
Application	Conversion Kit Only
UL Listing Type	UL 10C, 228/325
ANSI Number	A156.19, A117.1
Restrictions	None
BAA Qualified	Yes
Limited Warranty	2 Years
Burglar Rated	No
ADA Compliance	Yes
Finish
Finish	689/US28, 690
Finish Description	Aluminum Painted, Dark Bronze
Finish Family	Matte Silver, Dark Bronze

Technical Specs
Type	Surface
Technology	Electrohydraulic
Mounting Location	Push or Pull Side
Mounting Style	Tri Mount
Arm Type	Double Lever Arm with PA Bracket
Hand	Non-Handed
Door Weight	185 lbs
Voltage	2A @ 24VDC
Physically Handicapped	Yes
Product Type	Door Operators

The Norton 6300 Series Low Energy Operator offers a broad set of intelligent functions, such as power close, latch assist and obstruction detection to safely secure a variety of moderate to high traffic openings. A unique design with one of the slimmest profiles available allows the 6300 to blend more seamlessly with the frame while fitting challenging applications with minimal header space. A modular design, simple controls, and new wifi interface via a mobile device make for easy installation and setup.

 

Door Control (interior) (exterior) closing force shall be adjustable to ensure adequate closing control. Door Operator shall simulate conventional door closer opening and closing forces unless the power operator motor is activated. Door Operator shall have electronic backcheck to cushion the door speed if door is opened violently. [(Door Operator shall be AUTOMATICALLY ACTIVATED by either a slight push or pull in the direction of opening swing - Push and Go.) (Door Operator shall be SELECTIVELY ACTIVATED by external initiating device, i.e. wall switch, etc.) (Door Operator shall be both AUTOMATICALLY ACTIVATED and SELECTIVELY ACTIVATED.)] Operator shall have selectable power close to provide additional closing force to overcome conditions that may prevent door from latching. Unit shall have delay switches for motor activation, electric lock interfacing, and hold open time. Units shall interface with latch assist exit devices or similar products and have 24VDC @ 1.3A maximum (less accessories) output for connection of electric strike, lock, radio frequency receiver, etc. Unit shall have a three-position Selector Mode Switch that will permit the unit to be switched "ON" to monitor for function inputs, switch to "H/O" for infinite hold open function or switched "OFF" which will disable function inputs allowing unit to be used as a manual door closer. Unit shall be U.L. Listed for automatic closing door. The Unit shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA). Unit shall be certified by BHMA to meet A156.19 requirements. Unit shall meet UL325/991, UL10C standards.

 

689 Aluminum

690 Statuary Bronze

BSP Black Suede Powder Coat

WSP White Suede Powder Coat

 

Downloads

Brand	ORCA HARDWARE
Applications	COMMERCIAL
Part Number	BHDC1958RA/PA AL
Collection Series	1958 SERIES
Function	REGULAR ARM / PARALLEL BRACKET
Duty Rating	HEAVY DUTY

 

 

Finishes

Aluminum

Dark Bronze

Black

 

Easy to install and superior engineering • Complies with ANSI A156.4 Grade 1 • UL Listed • ADA (Handicap) multi-sized closers with adjustable Spring Power for a range of sizes adjustable after installation • Manuafactured under ISO 9001 guidlines • Tri-Style installation: Installs regular, parallel arm or top jamb • Non-Handed, installs on either side of door • Adjustable Sweep and Latch speeds, separate valves to adjust each speed • Adjustable Back-check standard • Adjustable Delayed Action Closing Option, closers to be furnished with delayed action feature, suffix “DA” to catalog number • Cast iron body, cover made of High Impact UL Listed molded plastic cover • Power of closer can be adjusted to conform to the requirements of the Americans with Disabilities Act (ADA) and as outlined in ANSI A117.1 Specifications for making buildings and facilities accessable to and usuable by the phsically handicapped • Door Opening: regular arm 120, parallel arm 180, and top jamb 120 • Finishes: Plastic Cover - AL, Duro • 10 year warranty

• Primary Image

• Spec Sheet
• Installation Instructions
• Template

Brand	ORCA HARDWARE
Applications	COMMERCIAL
Part Number	BHDC2011RA/PA AL
Collection Series	2011 SERIES
Function	REGULAR ARM / PARALLEL BRACKET
Duty Rating	MEDIUM DUTY

Finishes

Aluminum

Dark Bronze

Black

 

 

Grade 1 Parallel Arm Door Closer, Push Side, Unitrol Arm, Size 1 to 6, For 33" to 41" Doors, Plastic Cover, Aluminum Painted Finish, Non-Handed

Unitrol® Arm
Can be used for either parallel arm or top jamb applications. Unitrol arms combine the features of a double lever arm overhead door
stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads to a minimum. The Unitrol uses a
compression spring buffer at the soffit plate/arm shoe that will absorb 30 lbf. of force, 5° prior to the door’s dead stop. Coupled with the
door closer’s backcheck feature, this arm provides the most controlled stop available with a surface door closer.
For parallel arm applications there are three different length arm assemblies. Each length is designed for a specific range of door widths
to provide precise door control. This further lessens the dead stop impact on the door’s hinges/pivots.

The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.

 

 

The 4110 is LCN's best performing heavy duty closer with an adjustable
spring and possible hold open point beyond 140 degrees, meeting ADA
requirements. Backed by a 30 year warranty, the cast iron body and all
weather fluid offer versatility in high traffic applications.
Features
4110 Series
Customized installation templates or products may be available to solve non-standard applications.
Contact LCN Product Support for assistance.
Special
templates
Certifications Grade 1 - ANSI A156.4, UL 10C, ADA, 100 hour
salt spray, meets BAA - Buy American Act
Body
construction
§ Cast iron body
§ Full complement bearing
§ 1 1
⁄2" diameter piston
§ 11⁄16" diameter double heat treated
pinion journal
Fluid All weather fluid
Handing Handed
Templating Peel-n-Stick templates -
2 1
⁄2" x 6" mounting hole pattern
Size Adjustable spring size 1-5, or sized 6, includes
LCN Green Dial
Warranty 30 years
Cover § Plastic Cover (PC), standard
§ Metal Cover (MC), optional
Fasteners Self Reaming and Tapping Screws (SRT)
Mounting Parallel arm (push side)
Arms Extra-duty arm
Finishes/colors/
powder coat
§ 622 Matte black
§ 689 Aluminum
§ 690 Statuary bronze
§ 691 Light bronze
§ 693 Black
§ 695 Dark bronze
§ 696 Brass
§ Custom colors optional
§ Optional SRI primer - powder coat only
§ Optional plated finishes