RCI 910TC

RCI 910TC

by RCI
$ 85.00
  • Aesthetically pleasing designs.
  • Hands-free – helps reduce the spread of germs and bacteria.
  • Adjustable detection zone to reduce unwanted activations.
  • When the device is activated, the indicator light (waving hand) will change color.
  • Secondary Normally Open (NO) mechanical switch in the event of a power loss.
  • Selectable unlock times (1-63 seconds).
  • Mounts on single-gang electrical box.
  • Available remote control to trigger switch remotely.
  • May be purchased as a kit (910TC-WRM-WRB). Includes 910TC Switch, 910TCWRM Remote Receiver Module and 910TC-WRB Remote Transmitter.
  • Meets ADA compliance to ANSI/BHMA A156.19
    (Always check local building codes for compliance in your area)
Technical Specs
Operating Voltages 12/24 VDC
Relay Action Momentary
Relay Type SPDT
Sensor Technology Capacitive
Range 1" to 2"
Mounting Plate Size 1 Gang
Environment Indoor
Product Type Touchless Actuators

Related products

RCI 0161 Semi-Mortise Electric Strike

RCI 0161 Semi-Mortise Electric Strike

$ 221.00
RCI 0161 Semi-Mortise Electric Strike

RCI 0161 Semi-Mortise Electric Strike

by RCI
$ 221.00

Product Summary


The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices. The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.


  • Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
  • Strength: 1,500lbf Static 70ft-lb Dynamic
  • Endurance: 500,000 Cycles
  • Mode: Fail-Secure
  • Warranty: 5 Year Limited Warranty
Product Details

  • Semi-mortise rim strike designed for use with Pullman latch rim exit devices
  • Accommodates 1/2" to 3/4" (13mm–19mm) latch projection
  • Ensures proper latch alignment with horizontal adjustment
  • Stainless steel ensures superior strength and creates a sleek aesthetic design
  • Lockdown holes for secure mount
  • Non-handed
  • 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
  • 1,500lbf Static 70ft-lb Dynamic
  • 500,000 Cycles
  • Fail-Secure
  • 5 Year Limited Warranty
RCI 0162 32D 3/4" Electric Strike

RCI 0162 32D 3/4" Electric Strike

$ 362.00
RCI 0162 32D 3/4" Electric Strike

RCI 0162 32D 3/4" Electric Strike

by RCI
$ 362.00

RCI 0162 3/4" Rim

The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

  • Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
  • Strength: 1,500lbf Static 70ft-lb Dynamic
  • Endurance: 250,000 Cycles
  • Mode: Fail-Secure
  • Latch Monitor: Optional Latch Monitor Model Available
  • Fire-Rated: Optional 3-Hour Model Available
  • Warranty: 5 Year Limited Warranty

Product details

 

  • Completely surface-mounted – no frame cutting required
  • Accommodates 1/2" to 3/4" (13mm–19mm) latch projection
  • Mounting spacer included to provide enhanced latch engagement
  • Stainless steel ensures superior strength and creates a sleek aesthetic design
  • Horizontal adjustment ensures proper latch positioning to compensate for door misalignment – up to 1/4" (6.4mm)
  • Conventional keeper design (one moving part)- promotes even load distribution
  • Plug-in wire connectors
  • Lockdown holes for secure mount
  • HEX socket head cap screws for added support
  • Installation tool included (HEX key)
  • Non-handed (featuring horizontal solenoid design)
  • 1/16" (1.5mm) mounting spacer for additional latch engagement included
  • 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
  • 1,500lbf Static 70ft-lb Dynamic
  • 250,000 Cycles
  • Fail-Secure
  • Optional Latch Monitor Model Available
  • Optional 3-Hour Model Available (Fire-Rated F0162 and F0162LM models)  
  • 5 Year Limited Warranty

 

RCI 0163 32D 1/2" Electric Strike

RCI 0163 32D 1/2" Electric Strike

$ 369.00
RCI 0163 32D 1/2" Electric Strike

RCI 0163 32D 1/2" Electric Strike

by RCI
$ 369.00

RCI 0163 1/2" Rim

CATALOG

This solenoid rim strike is a surface-mounted electric strike designed to work with Pullman style rim exit device latches. Designed to fit in tight situations where the exit device is mounted very close to the door frame, e.g. aluminum storefront applications.

  • Energy: 270mA (max at 12VDC), 11-16VAC, 12VAC/VDC Or 24VAC/VDC
  • Mode: Fail-Secure
  • Strength: 1,500lbf Static, 70ft-lb Dynamic
  • Endurance: 500,000 Cycles
  • Warranty: 5 Year Limited
  • Monitoring: Optional Latch Monitor Model Available

 

 

  • Designed to fit in tight situations where the exit device is mounted very close to the door frame, e.g. aluminum storefront applications.
  • For maximum latch engagement, the strike keeper has been designed to pivot out of the strike body versus rolling out of the strike.
  • Accommodates 1/2“ (13 mm) latch projection.
  • Horizontal adjustment ensures proper latch positioning to compensate for door misalignment – up to 1/4“ (6.4 mm).
  • Shim may be added to the strike cavity to engage with misaligned deadlatch. 
  • Lockdown holes for secure mount.
  • Cooler operation – runs cool to the touch; no suppressor kit needed.
  • High-grade stainless steel ensures superior strength and creates a sleek aesthetic.
  • Non-handed.
  • Plug-in wire connectors.

Technical Drawing


 

RCI 2364 Electric Strike

RCI 2364 Electric Strike

$ 418.00
RCI 2364 Electric Strike

RCI 2364 Electric Strike

by RCI
$ 418.00

Product Summary


The 2 series are versatile, all-in-one, electric strikes that combine strength and convenience in a sleek design. The RCI F2164 & 2364 strikes feature an adjustable deadbolt keeper and deadlatch ramp allowing them to flexibly work with most locks. The "Saw-tooth Adjustment Locator" makes installation simple. It allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. It also includes a trim plate to cover up an irregular frame cut-out. Everything you need for the strike is in the box, including a faceplate for centerline latch entry.


  • Energy: 375mA Field-Selectable 12/24VDC, 12-24VAC (Max at 12VDC) (12-24VAC not available with 2364 model)
  • Strength: 1,500lbf Static 70ft-lb Dynamic
  • Endurance: 500,000 Cycles
  • Mode: Fail-Secure & Fail-Safe
  • Fire-Rated: Optional 3-Hour Model Available (Fire-rated (F) model only, 3-hour for single swing, 90-minutes for standard pair of doors)
  • Latch Monitor: Plug-In Latch Monitor Accessory Available
Product Details

  • Versatile strike designed to work with most locks
  • Accommodates 1/2" (12.7mm) to 3/4" (19mm) latch projection
  • Adjustable deadbolt keeper and deadlatch ramp
  • Accommodates up to 1" deadbolt (night-latch function only, bolt will not release)
  • Plug-in wire connectors
  • Runs cool – solenoid design prevents keeper from heating up
  • Trim plate included to cover up irregular frame cut-out
  • Stainless steel ensures superior strength and creates a sleek aesthetic
  • Includes two keeper shims – 1/16" (1.5mm) and 1/8" (3mm) –for horizontal adjustment for misaligned frames (unique sliding design)
  • Non-handed
  • 375mA Field-Selectable 12/24VDC, 12-24VAC (Max at 12VDC) (12-24VAC not available with 2364 model)
  • 1,500lbf Static 70ft-lb Dynamic
  • 500,000 Cycles
  • Fail-Secure & Fail-Safe
  • Optional 3-Hour Model Available (Fire-rated (F) model only, 3-hour for single swing, 90-minutes for standard pair of doors)
  • Plug-In Latch Monitor Accessory Available
  • 10 Year Limited Warranty
RCI 4107 6-7/8" Faceplate Electric Strike

RCI 4107 6-7/8" Faceplate Electric Strike

$ 119.00
RCI 4107 6-7/8" Faceplate Electric Strike

RCI 4107 6-7/8" Faceplate Electric Strike

by RCI
$ 119.00

Product Summary


The 4 series centerline strike accommodates ¾” latch projections. Its various faceplate options and 1-1/2” cut-out depth accommodates most door frame types and materials. Installation is simple with standard mounting tabs and included fasteners. Crossed wires are never a problem, as the coil is not polarity sensitive. The RCI 4 series centerline strikes are available with an optional 1-1/2 hour fire-rating. 41 Series depicts fail-secure and 43 Series depicts fail-safe.


  • Energy: 200mA 11-16VAC, 12VAC/VDC, 24VAC/VDC (At 12VDC)
  • Strength: 1,500lbf Static2 70ft-lb Dynamic (1,500lbf Static for fire-rated models, 1,000lbf for non-fire-rated 04 & 14 faceplates, 500lbf for 05, 07, 08 & 19 faceplates.)
  • Endurance: 500,000 Cycles (Fire-rated (F) models only, 250,000 for other models)
  • Mode: Fail-Secure & Fail-Safe
  • Fire-Rated: Optional 1-1/2-Hour Models Available (Fire-rated (F) models only available in fail-secure mode with 04 & 14 faceplates)
  • Warranty: 3 Year Limited Warranty
Product Details

  • Accommodates 3/4" (19mm) latch projection
  • 1-1/2" (38mm) cut-out depth accommodates most door frame material types
  • Use with wide range of door thicknesses, 1-3/8" to 2-3/8" (35mm-60mm)
  • Standard mounting tabs and fasteners included
  • Non-handed
  • Trim plate included to cover up irregular frame cutout
  • 200mA 11-16VAC, 12VAC/VDC, 24VAC/VDC (At 12VDC)
  • 1,500lbf Static2 70ft-lb Dynamic (1,500lbf Static for fire-rated models, 1,000lbf for non-fire-rated 04 & 14 faceplates, 500lbf for 05, 07, 08 & 19 faceplates.)
  • 500,000 Cycles (Fire-rated (F) models only, 250,000 for other models)
  • Fail-Secure & Fail-Safe
  • Optional 1-1/2-Hour Models Available (Fire-rated (F) models only available in fail-secure mode with 04 & 14 faceplates)
  • 3 Year Limited Warranty