Sargent 10U68 Hospital Privacy Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

• Sargent 10U68 Hospital Privacy Lever-

Sargent 10U65 Privacy/Bathroom Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

• Sargent 10U65 Privacy/Bathroom Lever-

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL Listed 3-hour, A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
• Roses shall be 3-1/2” diameter.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.

Dorma DB662 Cylinder x Cylinder :
.Dead bolt operated by key either side

Providing increased security, reliability, and durability. DORMA offers a choice of rugged dead bolts to provide an added sense of protection. The DB600 Series are Grade 2 dead bolts with an adjustable 2-3/8"– 2-3/4" backset. The 1" throw dead bolt includes a hardened steel roller to prevent sawing through the bolt. The Heavy-Duty cylinders are through-bolted, with reinforced cylinder rings to protect against physical attack. Brass 6-pin cylinders are provided for security and durability. The solid steel strike plate reinforcement with 2" screws protects the door jamb against a kick-in attack.
Recommended Applications .Apartments .Municipal Buildings .Retail Complexes .Warehouses
Technical Details .Hardened steel housing for superior protection against blunt force attack. .Large steel spin ring for protection against attack by wrenching and prying. .(2) 1/4-28 high strength steel mounting screws for protection against prying. .Available in all DORMA SKC keyways in both Small Format Interchangeable Core (SFIC) and standard cylinders. Also available in many Best keyways as well as Schlage C and E, Sargent LA, and many thers. Consult factory for additional keyways. .Strike reinforcement with 3" wood screws for wooden jambs provides increased resistance to kick-in attack.
Certifications Certified to the requirements of ANSI/BHMA A156.36 Grade 2.
UL/CUL – UL 10C Positive Pressure Lsted 3 hour fire rated.
Cylinders and Keying .Unless otherwise specified, cylinders will be provided in DORMA standard keyway with two (2) nickel silver keys. .Optional patented key system available. .Refer to DORMA Price List for full details and options such as master keying, retrofit cylinders and keyways, and small format interchangeable cores.
Warranty For details, refer to DORMA Limited Warranty on our website at go.dorma.com/terms.
Finishes Brass: 605 (Bright). Bronze: 613 (Dark Oxidized Satin). Nickel: 619 (Satin). Chrome: 626 (Satin). Stainless Steel: 630 (Satin).
Special Finish Notes ANSI/BHMA A156.18 standards describe 613 Dark Oxidized Satin Bronze finish as a category B finish. B category finishes, “do not match from one alloy or form of material to the next and from one manufacturer to the next.” The 613 finish may vary between manufacturers’ products and models.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish designations in the 600 numbers are the BHMA (Builders Hardware Manufacturers Association) industry standard.

Dorma D880 Turn × Blank Plate :
.Dead bolt operated by turn inside. Blank plate on other side. .Bolt automatically deadlocks when fully thrown.

 Providing increased security, reliability, and durability. DORMA offers a choice of rugged dead bolts to provide an added level of protection. The D800 Series are Grade 1 dead bolts available in both 2-3/8" and 2-3/4" (standard) backsets. The large dead bolt is made from stainless steel for strength and corrosion resistance. A HeavyDuty brass cylinder in a hardened steel housing surrounded by a heavy steel spin ring complete the security package in the door. This is coupled with a solid steel strike for use in a hollow metal frame and an additional reinforcing plate with 3" screws for wood jamb installations. All of these features provide an exceptionally strong and secure dead bolt. All steel parts are zinc dichromate plated.

Recommended Applications .Schools and Universities .Hotels .Apartments .Hospitals and Nursing Homes .Churches .Municipal Buildings .Airports .Retail Complexes .Offices .Warehouses
Technical Details .Hardened steel housing for superior protection against blunt force attack. .Large steel spin ring for protection against attack by wrenching and prying. .(2) 1/4-28 high strength steel mounting screws for protection against prying. .Available in all DORMA SKC keyways in both Small Format Interchangeable Core (SFIC) and standard cylinders. Also available in many Best keyways as well as Schlage C and E, Sargent LA, and many others. Consult factory for additional keyways. .Strike reinforcement with 3" wood screws for wooden jambs provides increased resistance to kick-in attack.
Certification Certified to the requirements of ANSI/BHMA A156.36 Grade 1.
UL/CUL – UL 10C Positive Pressure Listed 3 hour fire rated.
Cylinders and Keying .Unless otherwise specified, cylinders will be provided in DORMA standard keyway with two (2) nickel silver keys. .Optional patented key system available. .Refer to DORMA Price List for full details and options such as master keying, retrofit cylinders and keyways, and small format interchangeable cores.
Warranty For details, refer to DORMA Limited Warranty on our website at go.dorma.com/terms.
Finishes Brass: 605 (Bright) or 606 (Satin). Bronze: 612 (Satin) or 613 (Dark Oxidized Satin). Nickel: 619 (Satin) Chrome: 625 (Bright) or 626 (Satin).
Antimicrobial Protected Coating Specify AM.
Special Finish Notes ANSI/BHMA A156.18 standards describe 613 Dark Oxidized Satin Bronze finish as a category B finish. B category finishes, “do not match from one alloy or form of material to the next and from one manufacturer to the next.” The 613 finish may vary between manufacturers’ products and models.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish designations in the 600 numbers are the BHMA (Builders Hardware Manufacturers Association) industry standard.
Door Preparation 2-1/8" or 1-1/2" diameter mounting hole.
Security Screws Torx® tamper-resistant screws are available for all exposed screws. Specify TX.

Dorma D861 Cylinder × Blank Plate:
.Dead bolt operated by key one side. Blank plate on other side. .Bolt automatically deadlocks when fully thrown.
 Providing increased security, reliability, and durability. DORMA offers a choice of rugged dead bolts to provide an added level of protection. The D800 Series are Grade 1 dead bolts available in both 2-3/8" and 2-3/4" (standard) backsets. The large dead bolt is made from stainless steel for strength and corrosion resistance. A HeavyDuty brass cylinder in a hardened steel housing surrounded by a heavy steel spin ring complete the security package in the door. This is coupled with a solid steel strike for use in a hollow metal frame and an additional reinforcing plate with 3" screws for wood jamb installations. All of these features provide an exceptionally strong and secure dead bolt. All steel parts are zinc dichromate plated.

Recommended Applications .Schools and Universities .Hotels .Apartments .Hospitals and Nursing Homes .Churches .Municipal Buildings .Airports .Retail Complexes .Offices .Warehouses
Technical Details .Hardened steel housing for superior protection against blunt force attack. .Large steel spin ring for protection against attack by wrenching and prying. .(2) 1/4-28 high strength steel mounting screws for protection against prying. .Available in all DORMA SKC keyways in both Small Format Interchangeable Core (SFIC) and standard cylinders. Also available in many Best keyways as well as Schlage C and E, Sargent LA, and many others. Consult factory for additional keyways. .Strike reinforcement with 3" wood screws for wooden jambs provides increased resistance to kick-in attack.
Certification Certified to the requirements of ANSI/BHMA A156.36 Grade 1.
UL/CUL – UL 10C Positive Pressure Listed 3 hour fire rated.
Cylinders and Keying .Unless otherwise specified, cylinders will be provided in DORMA standard keyway with two (2) nickel silver keys. .Optional patented key system available. .Refer to DORMA Price List for full details and options such as master keying, retrofit cylinders and keyways, and small format interchangeable cores.
Warranty For details, refer to DORMA Limited Warranty on our website at go.dorma.com/terms.
Finishes Brass: 605 (Bright) or 606 (Satin). Bronze: 612 (Satin) or 613 (Dark Oxidized Satin). Nickel: 619 (Satin) Chrome: 625 (Bright) or 626 (Satin).
Antimicrobial Protected Coating Specify AM.
Special Finish Notes ANSI/BHMA A156.18 standards describe 613 Dark Oxidized Satin Bronze finish as a category B finish. B category finishes, “do not match from one alloy or form of material to the next and from one manufacturer to the next.” The 613 finish may vary between manufacturers’ products and models.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish designations in the 600 numbers are the BHMA (Builders Hardware Manufacturers Association) industry standard.
Door Preparation 2-1/8" or 1-1/2" diameter mounting hole.
Security Screws Torx® tamper-resistant screws are available for all exposed screws. Specify TX.

Dorma D860 Cylinder x Turn:
Dead bolt operated by key outside or by turn inside. Bolt automatically deadlocks when fully thrown. Providing increased security, reliability, and durability. DORMA offers a choice of rugged dead bolts to provide an added level of protection. The D800 Series are Grade 1 dead bolts available in both 2-3/8" and 2-3/4" (standard) backsets. The large dead bolt is made from stainless steel for strength and corrosion resistance. A HeavyDuty brass cylinder in a hardened steel housing surrounded by a heavy steel spin ring complete the security package in the door. This is coupled with a solid steel strike for use in a hollow metal frame and an additional reinforcing plate with 3" screws for wood jamb installations. All of these features provide an exceptionally strong and secure dead bolt. All steel parts are zinc dichromate plated.

Recommended Applications .Schools and Universities .Hotels .Apartments .Hospitals and Nursing Homes .Churches .Municipal Buildings .Airports .Retail Complexes .Offices .Warehouses
Technical Details .Hardened steel housing for superior protection against blunt force attack. .Large steel spin ring for protection against attack by wrenching and prying. .(2) 1/4-28 high strength steel mounting screws for protection against prying. .Available in all DORMA SKC keyways in both Small Format Interchangeable Core (SFIC) and standard cylinders. Also available in many Best keyways as well as Schlage C and E, Sargent LA, and many others. Consult factory for additional keyways. .Strike reinforcement with 3" wood screws for wooden jambs provides increased resistance to kick-in attack.
Certification Certified to the requirements of ANSI/BHMA A156.36 Grade 1.
UL/CUL – UL 10C Positive Pressure Listed 3 hour fire rated.
Cylinders and Keying .Unless otherwise specified, cylinders will be provided in DORMA standard keyway with two (2) nickel silver keys. .Optional patented key system available. .Refer to DORMA Price List for full details and options such as master keying, retrofit cylinders and keyways, and small format interchangeable cores.
Warranty For details, refer to DORMA Limited Warranty on our website at go.dorma.com/terms.
Finishes Brass: 605 (Bright) or 606 (Satin). Bronze: 612 (Satin) or 613 (Dark Oxidized Satin). Nickel: 619 (Satin) Chrome: 625 (Bright) or 626 (Satin).
Antimicrobial Protected Coating Specify AM.
Special Finish Notes ANSI/BHMA A156.18 standards describe 613 Dark Oxidized Satin Bronze finish as a category B finish. B category finishes, “do not match from one alloy or form of material to the next and from one manufacturer to the next.” The 613 finish may vary between manufacturers’ products and models.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish designations in the 600 numbers are the BHMA (Builders Hardware Manufacturers Association) industry standard.
Door Preparation 2-1/8" or 1-1/2" diameter mounting hole.
Security Screws Torx® tamper-resistant screws are available for all exposed screws. Specify TX.

Corbin Russwin DL3060 Thumbturn x Blank Deadlock: Thumbturn x Blank Deadlock

Features

• Handing: Non-handed, except DL3017, which is handed and field reversible.
• Door Thickness: Standard - 1-3/4" (44mm) - 2-1/4" (57mm). Optional door thicknesses available; see Quick Codes.
• Backset: Standard - 2-3/4" (70mm); Optional - 2-3/8" (60mm)
• Front: Standard - wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Deadbolt: Zinc diecast hardened steel insert. 1" (25mm) throw, 5/8" (16mm) wide x 3/4" (19mm) high.
• Strike: Standard - 2-3/4" (70mm) x 1-1/8" (29mm). Optional strikes and wrought boxes available
• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted. Security cylinders optional; see Quick Codes.
• Keys: Two nickel silver standard.
• Keying Features Available; Master keying; Construction master keying; 7-pin (FC) conventional; Interchangeable core (IC); Security; Security (IC); Visual key control; Concealed key control; Pyramid (FC); Pyramid (IC)
• Warranty: One-year limited.

Corbin Russwin DL3017 Classroom Deadlock:- By key outside and by thumbturn inside. - Thumbturn will retract but not project deadbolt.

Features

• Handing: Non-handed, except DL3017, which is handed and field reversible.
• Door Thickness: Standard - 1-3/4" (44mm) - 2-1/4" (57mm). Optional door thicknesses available; see Quick Codes.
• Backset: Standard - 2-3/4" (70mm); Optional - 2-3/8" (60mm)
• Front: Standard - wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Deadbolt: Zinc diecast hardened steel insert. 1" (25mm) throw, 5/8" (16mm) wide x 3/4" (19mm) high.
• Strike: Standard - 2-3/4" (70mm) x 1-1/8" (29mm). Optional strikes and wrought boxes available
• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted. Security cylinders optional; see Quick Codes.
• Keys: Two nickel silver standard.
• Keying Features Available; Master keying; Construction master keying; 7-pin (FC) conventional; Interchangeable core (IC); Security; Security (IC); Visual key control; Concealed key control; Pyramid (FC); Pyramid (IC)
• Warranty: One-year limited.

Corbin Russwin DL2211 Cylinder x Blank Deadlock:  By key one side only; opposite side blank.

Features

• Handing: Non-handed.
• Door Thickness: Standard - 1-3/4" (44mm). Optional door thicknesses available; see Quick Codes.
• Backset: Standard -  2-3/4" (70mm); Optional: 2-3/8" (60mm)
• Front: Standard - brass or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm). Optional: 1" width; see Quick Codes.
• Deadbolt: 1" throw, solid steel deadbolt with hardened, free spinning, steel pin insert.
• Strike: Standard - 2-3/4" (70mm) x1-1/8" (29mm). Optional strikes and wrought boxes available.
• Cylinder: Standard - brass, 6-pin, L4 keyway, 0-bitted. Security cylinder optional; see Quick Codes.
• Keys: Two nickel silver standard.
• Keying Features Available: Master keying; construction master keying; security; visual key control; concealed key control
• Warranty: One-year limited.

A heavy-duty Grade 1 lever lockset, ideal for commercial, institutional and multifamily applications such as:

• Interior offices 
• Apartment complexes
• Convalescent and elderly care facilities
• Hotels
• Restaurants
• Retail centers

• Deadlocking latchbolt by lever either side except when turn button locks outside lever. Pushing turn button locks outside lever, requiring use of key outside to unlock.

• Turning inside lever unlocks outside lever (when button is pushed in but not turned).

• Pushing in and turning button locks outside lever, requiring key at all times. Turning inside lever does not unlock outside lever until button is manually turned to unlocked position.

• Inside lever always free.

Advantages

• Non-handed
• Solid cast levers
• Independent return springs to prevent lever sag
• Through-bolted cylindrical chassis prevents rotation and ensures proper alignment
• ANSI Grade 1 certification
• Trim and keying compatible with other Corbin Russwin locksets

Corbin Russwin CL33903 Electrified Lever Lock Fail Safe. The CL3300 series is a Grade 1 cylindrical lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes and four lever designs, the CL3300 series subtly complements any high-use commercial, industrial and institutional application.

CL33903 Fail Safe

• Deadlocking latchbolt by lever either side except when power on locks outside lever

• Power off/unlocks outside lever

• Inside lever always free

• Latchbolt retracted by key when locked electrically

Electrified locks contain an internal solenoid. The solenoid can be ordered to either lock when electrical current is applied or unlock when current is applied.

FAIL SAFE - Unlocked when lock is at rest. Only locks when current is applied.

Levers: Armstrong, Princeton & Newport Levers

Finishes: 605 (US3) Bright Brass, 606 (US4) Satin Brass, 612 (US10) Satin Bronze, 613 (US10B) Dark Oxidized Satin Bronze, Oil Rubbed, 625 (US26) Bright Chromium Plated, 626 (US26D) Satin Chromium Plated


Vandal Resistance

Engineered to meet today’s increased security needs, the CL3300 series offers several advantages. All functions feature the Lever Release™ design for vandal resistance, allowing the outside lever to rotate when in the locked position. All CL3300 series locksets, including the CL33900 series, are available with Corbin Russwin Pyramid patented security or high security cylinders, the most secure locking system available. Pyramid is especially recommende



d for installations that require superior protection against picking, drilling and other surreptitious entry. See the Pyramid catalog for additional information.


Access Control




For access control, the CL33900 Series Electrified Cylindrical lockset utilizes the proven CL3300 series lockset and
features an integral continuous duty solenoid that allows installation in a standard cylindrical prep. Available in Fail Safe or Fail Secure, the CL33900 is ideal for door control where increased security is necessary at all times, while meeting life safety codes.

Key Advantages
•EZ-Install components significantly reduce installation time
•Lever Release™ lever design for vandal resistance
•Pyramid cylinders for increased security
•Access control available with CL33900 Electrified lockset
•ElectroLynx® connectors are standard on all Corbin Russwin electrified products. McKinney QC hinges are recommended to make a complete plug and play application.
•Independent return springs prevent lever sag
•Covers ANSI/DHI Door Prep A115.18

The CL3300 series is a Grade 1 cylindrical lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes and four lever designs, the CL3300 series subtly complements any high-use commercial, industrial and institutional application.

• Throw-off latchbolt by lever.

• Outside lever locked by push button. (Lever handle is freewheeling in locked position.)

• Outside lever unlocked by emergency release tool outside, by rotating inside lever or by closing door.

• Inside lever always free.

Vandal Resistance

Engineered to meet today’s increased security needs, the CL3300 series offers several advantages. All functions feature the Lever Release™ design for vandal resistance, allowing the outside lever to rotate when in the locked position. All CL3300 series locksets, including the CL33900 series, are available with Corbin Russwin Pyramid patented security or high security cylinders, the most secure locking system available. Pyramid is especially recommende

d for installations that require superior protection against picking, drilling and other surreptitious entry. See the Pyramid catalog for additional information.

Corbin Russwin CK4457 Storeroom or Closet Knob. An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings, such as:

• Fine homes
• Apartments
• Motels
• Offices

Corbin Russwin CK4457 Storeroom or Closet:

• Deadlocking latchbolt by key in outside knob, or by rotating inside knob.

• Outside knob always rigid.

• Inside knob always free.

Advantages

• Wide array of functions
• Precision manufactured mechanisms, zinc dichromated for corrosion resistance
• Stainless steel latchbolt for long life
• Adjustable latchbolts accommodates flat and beveled doors
• Stainless steel trim available

Features Handing Field reversible.

Door Thickness 1-3/8" (35mm) - 1-3/4" (44mm) standard.

Backset 2-3/4" (70mm) standard.

Optional: 2-3/8" (60mm), 3-3/4" (95mm) and 5" (127mm); see How to Order, page 9.

Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Wrought brass, bronze, or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm) standard.

Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).

Optional fronts available; see How to Order, page 9. Latchbolt Brass or stainless steel, 1/2" (13mm) throw.

Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike Wrought brass, bronze, or stainless steel ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center.

Optional strikes, lip lengths and ANSI wrought strike box available; see How to Order, page 9.

Cylinder Brass, 6-pin L4 keyway, 0-bitted standard. Keying Features Available Master keying Construction master keying Keys Two nickel silver standard. Warranty One-year limited.

Certification/Compliance ANSI/BHMA Certified and meets A156.2 Series 4000, Grade 2. Federal Meets FF-H-106C. UL-cUL UL/ULC All locks with listed for A label and lesser class single doors, 4' x 8'. Letter F and UL symbol on latch front indicate listing.

Any retrofit or other field modification to a fire-rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation.

When retrofitting any portion of an existing firerated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratingsAvailable Finishes

Click on a swatch to view finish on hardware.

BHMA 605	Bright Brass
BHMA 612	Satin Bronze
BHMA 613	Dark Oxidized Satin Bronze, Oil Rubbed
BHMA 629	Bright Stainless Steel
BHMA 630	Satin Stainless Steel

Trim

Belmont
Global

• Wide array of functions
• Precision manufactured mechanisms, zinc dichromated for corrosion resistance
• Stainless steel latchbolt for long life
• Adjustable latchbolts accommodates flat and beveled doors
• Stainless steel trim available

Corbin Russwin CK4450 Half Dummy Trim Knob. An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings, such as:

• Fine homes
• Apartments
• Motels
• Offices

Corbin Russwin CK4450 Half Dummy Trim:

• Knob acts as pull only; no operation.

• Knob is rigid.

Advantages

• Wide array of functions
• Precision manufactured mechanisms, zinc dichromated for corrosion resistance
• Stainless steel latchbolt for long life
• Adjustable latchbolts accommodates flat and beveled doors
• Stainless steel trim available

Features Handing Field reversible.

Door Thickness 1-3/8" (35mm) - 1-3/4" (44mm) standard.

Backset 2-3/4" (70mm) standard.

Optional: 2-3/8" (60mm), 3-3/4" (95mm) and 5" (127mm); see How to Order, page 9.

Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Wrought brass, bronze, or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm) standard.

Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).

Optional fronts available; see How to Order, page 9. Latchbolt Brass or stainless steel, 1/2" (13mm) throw.

Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike Wrought brass, bronze, or stainless steel ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center.

Optional strikes, lip lengths and ANSI wrought strike box available; see How to Order, page 9.

Cylinder Brass, 6-pin L4 keyway, 0-bitted standard. Keying Features Available Master keying Construction master keying Keys Two nickel silver standard. Warranty One-year limited.

Certification/Compliance ANSI/BHMA Certified and meets A156.2 Series 4000, Grade 2. Federal Meets FF-H-106C. UL-cUL UL/ULC All locks with listed for A label and lesser class single doors, 4' x 8'. Letter F and UL symbol on latch front indicate listing.

Any retrofit or other field modification to a fire-rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation.

When retrofitting any portion of an existing firerated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratingsAvailable Finishes

Click on a swatch to view finish on hardware.

BHMA 605	Bright Brass
BHMA 612	Satin Bronze
BHMA 613	Dark Oxidized Satin Bronze, Oil Rubbed
BHMA 629	Bright Stainless Steel
BHMA 630	Satin Stainless Steel

Trim

Belmont
Global

• Wide array of functions
• Precision manufactured mechanisms, zinc dichromated for corrosion resistance
• Stainless steel latchbolt for long life
• Adjustable latchbolts accommodates flat and beveled doors
• Stainless steel trim available