Products

MANUAL

Seco-Larm SK-1011-SDQ Keypad

$ 42.99

Seco-Larm SK-1011-SDQ Keypad

by Seco-Larm

$ 42.99

Quantity

Indoor Access Control Keypad

The ENFORCER SK-1011-SDQ is a single-output, indoor access control keypad that doesn’t scrimp on the important features. It supports up to 1,000 users and 50 temporary visitors and can be surface mounted with the included back box or flush mounted in a standard single-gang back box. It includes a tamper alarm, and a backlit keypad for ease of use at night or in dark areas.

12~24 VDC/VAC Auto-adjusting operation
Up to 1,000 possible user codes (000~999)
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Form C relay, 1A@30VDC max. can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Tamper output N.C. Dry contact, 50mA@24VDC max.
Mounts to a standard single-gang back box (surface-mount back box included)
All features are programmed directly from the keypad with no need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Egress input lets users exit the premises without keying in the code
Data I/O terminal for split-series setup providing added security
Expansion port for future optional features
Always-on backlit keypad

Operating Voltage	12~24 VDC/VAC
Current Draw	Standby: 15mA Keypress: 30mA Output 1 active: 55mA Total (max.): 90mA
Outputs	Output 1, Form C: 1A@30VDC Tamper:50mA@24VDC
Egress Inputs	N.O. ground
Operating Humidity	5~95% Non-condensing
Operating Temperature	-4°~158° F (-20°~70° C)
Dimensions (including back box)	4-5/8″x2-7/8″x1-15/16″ (117x73x49 mm)
Weight	6-oz (170 g)

COMPARISON CHART

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL CHART

Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Keypad

$ 90.00

Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Keypad

by Seco-Larm

$ 90.00

Quantity

Vandal Resistant Flush-Mount Access Control Keypad

12~24 VAC/VDC auto-adjusting operation
Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Output #1: Form C relay, 1A@30VDC max.
Output #2: Transistor ground, 100mA@24VDC
Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Tamper output: N.C. Dry contact, 50mA@24VDC max
Mounts to standard single-gang back box
IP66 Weatherproof rating
Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode
All features are programmed directly from the keypad: No need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2
Duress code signals a silent alarm if an authorized user is forced to open the door under duress
Egress input lets users exit the premises without keying in the code
Door sensor input for anti-tailgating operation
Interlocking input for connecting to a second keypad

Operating Voltage	12~24 VDC/VAC
Current Draw – Standby	15mA@12VDC
Current Draw – Keypress	40mA@12VDC
Current Draw – Output 1 Active	65mA@12VDC
Current Draw – Output 1 & 2 Active	66mA@12VDC
Current Draw – Total Max	100mA@12VDC
Output- #2 Transistor Ground	100mA@24VDC
Output 1	1A@30VDC
Output – Duress	100mA@24VDC
Output – Interlock	100mA@24VDC
Output- Tamper	50mA@24VDC
IP Rating	Weatherproof IP66
Input – Egress	N.O. Ground
Input – Door Sensor	N.C. Ground
Input – Door Inhibit	N.O. Ground
Operating Temperature	-4°~158° F (-20°~70° C)
Operating Humidity	5~95% Non-condensing
Dimensions	4-3/4″x3-1/8″x1-13/16″ (120x80x46mm)
Weight	16.2-oz (300g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL CHART

Seco-Larm SK-1123-SDQ Vandal Resistant Outdoor Keypad

$ 109.95

Seco-Larm SK-1123-SDQ Vandal Resistant Outdoor Keypad

by Seco-Larm

$ 109.95

Quantity

Vandal Resistant Outdoor Access Control Keypad

1,100 Users over 2 Outputs. Codes may be 4~8 digits: – Output #1 – Form C relay, 1A@30VDC, 1,000 users – Output #2 – Form C relay, 1A@30VDC, 100 users
Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Super user code gives admin access to keypad
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Programmable egress input with optional warning alarm and delayed egress
Real-time clock to auto-disable access at specific times
Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2
Duress code signals a silent alarm if an authorized user is forced to open the door under duress
12~24 VDC/VAC Auto-adjusting operation
All features are programmed directly from the keypad: No need for an external programmer
IP66 Weatherproof Rating
Mounts to a standard single-gang back box (surface-mount back box included)
Durable and attractive stainless steel faceplate
Tamper output: N.C. Dry contact, 50mA@24VDC max.
Keypad illuminates when a button is pressed; backlight can be programmed for FULL, AUTO, or OFF in standby mode
Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
Door sensor input for anti-tailgating operation
Door-propped-open warning
Door-forced-open warning
EEPROM Memory protects programmed information in case of power loss

Type	Vandal-Resistant Outdoor Digital Access Keypad
Operating Voltage	12~24 VDC/VAC
Current Draw – Standby	66mA@12VDC
Current Draw – Keypress	93mA@12VDC
Current Draw- 1 Relay Active	99mA@12VDC
Current Draw – Total Max	160mA@12VDC
Current Draw- 1 & 2 Relays Active	126mA@12VDC
Relay Output- #1	1A@30VDC, Form C
Relay Output- #2	1A@30VDC, Form C
Relay Output- Key Active	100mA@24VDC
Relay Output- Duress	100mA@24VDC
Relay Output- Interlock	100mA@24VDC
Relay Output- Tamper	50mA@24VDC
Egress Inputs	N.O. Ground
Door Inhibit Input	N.O. Ground
Door Sensor Input	N.C. Ground
Operating Temperature	-4°~158° F (-20°~70° C)
Operating Humidity	5~95% Non-condensing
Dimensions	4-15/16”x3-1/8”x2-1/16” (125x79x52 mm)
Weight	1-lb, 2-oz (520g)
IP Rating	Weatherproof IP66

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL GUIDE

Seco-Larm SK-1131-SPQ Indoor Illuminated Keypad with Proximity Reader

$ 58.99

Seco-Larm SK-1131-SPQ Indoor Illuminated Keypad with Proximity Reader

by Seco-Larm

$ 58.99

Quantity

Indoor Illuminated Access Control Keypad with Proximity Reader

Built-in proximity card reader
12~24 VAC/VDC Auto-adjusting operation
Up to 1,000 possible user codes/cards for output 1, 100 for output 2, and 100 for output 3
Up to 50 possible visitor codes for one-time or limited-time use (1~99 hours)
Up to 50 duress codes for output 1, 10 for output 2, and 10 for output 3
Output 1: Form C relay, 1A@30VDC max. / output 2: Form C relay, 1A@30VDC max. / output 3: transistor ground, 100mA@24VDC
Outputs 1, 2, and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Tamper output N.C. Dry contact, 50mA@24VDC max.
All features are programmed directly from the keypad; no need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Duress code triggers a silent alarm if a user is forced to open the door under duress
Egress input lets users exit the premises without keying in the code
Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
Mounts to a standard single-gang back box (surface-mount back box included)
Keypad active or alarm output selectable via jumper
Interlocking input for connecting to a second keypad
Door sensor input for anti-tailgating
Data I/O terminal for split-series setup providing added security
Expansion port for future optional features

Operating Voltage	12~24 VAC/VDC
Current Draw	Standby: 66mA@12VDC Keypress: 93mA@12VDC Output 1 active: 99mA@12VDC Output 1 & 2 active: 126mA@12VDC Output 1, 2 & 3 active: 127mA@12VDC Total max. current draw: 160mA@12VDC
Outputs	#1 Form C: 1A@30VDC #2 Form C: 1A@30VDC #3 Transistor ground: 100mA@24VDC K or A: 100mA@24VDC Duress: 100mA@24VDC Interlock: 100ma@24VDC Tamper:50mA@24VDC
Inputs	Egress: N.O. Ground Door sensor: N.C. Ground Door inhibit: N.O. Ground
Proximity Reader Frequency	125kHz (EM125)
Proximity Reader Sensing Distance	1-1/2” (38mm)
Operating Humidity	5~95% Non-condensing
Operating Temperature	-4°~158° F (-20°~70° C)
Dimensions (including back box)	4-5/8″x2-7/8″x1-15/16″ (117x73x49 mm)
Weight	6-oz (170g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm SK-1323-SDQ / SK-2323-SDQ Sealed Housing Weatherproof Stand-Alone Keypad

from $ 89.50

Seco-Larm SK-1323-SDQ / SK-2323-SDQ Sealed Housing Weatherproof Stand-Alone Keypad

by Seco-Larm

$ 89.50

Mounting Size

Quantity

Sealed Housing Weatherproof Stand-Alone Digital Access Keypad

• 12~24 VAC/VDC operation

• 1,010 Users (Output #1: 1,000 users, Output #2: 10 users)

• 2 Form C relays, each rated 1 Amp @ 30VDC

• Each relay has programmable output time from 1~99 seconds or toggle

• Output #2 can be programmed for use with a doorbell

• 2 Egress inputs and 1 door sensor input

• Backlit keys for easy nighttime use

• Two multi-colored status LEDs

• Able to mount to a single-gang back box

• All features are programmed directly from the keypad – no need for an external programmer

• EEPROM memory protects programmed information in case of power loss

• Optical tamper for added security

• Circuitry is potted with epoxy for outdoor use

• IP65 Weatherproof rating, rugged aluminum construction

Type	Sealed Housing Weatherproof Outdoor Digital Access Keypad
Number of User Codes	Up to 1,010
Operating Voltage	12~24 VAC/VDC
Current Draw – Standby	64mA@12VDC
Current Draw- Active	92~120mA@12VDC
Relay Outputs (2)	1A@30VDC, Form C, NO/COM/NC
IP Rating	Weatherproof IP65
Egress Inputs	2, N.O. Ground
Door Sensor Input	N.C. Ground
Tamper Sensor	Optical
Keypad LED Life	60,000 hours (over 6.8 years)
Operating Temperature	-4°~122° F (-20°~50° C)
Dimensions	4-3/4″x3″x7/8″ (120x76x22 mm), 6″ x 1-3/4″ x 15/16″ (152 x 44 x 24 mm)
Weight	1-lb 2-oz (510g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM

USER CONTROL CHART

Seco-Larm SK-3133-PPQ Heavy-Duty Outdoor Keypad with Proximity Reader

$ 147.25

Seco-Larm SK-3133-PPQ Heavy-Duty Outdoor Keypad with Proximity Reader

by Seco-Larm

$ 147.25

Quantity

Heavy-Duty Outdoor Access Control Keypad with Proximity Reader

The ENFORCER SK-3133-PPQ features rugged construction with a heavy-duty stainless-steel faceplate and a coated steel backing to withstand the elements.

Rugged construction – heavy-duty stainless steel faceplate with coated steel housing
Built-in proximity reader
12~24 VAC/VDC Auto-adjusting operation
Up to 1,000 possible user codes/cards for output 1 and 100 each for outputs 2 and 3
Up to 50 possible visitor codes, for one-time or limited-time use (1~99 hours)
Up to 50 duress codes for output 1 and 10 each for outputs 2 and 3
Output 1: Form C relay, 5A@24VDC max. / output 2 and 3: Form C relay, 1A@24VDC max.
Outputs 1, 2 and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Tamper output, 50mA@24VDC max.
All features are programmed directly from the keypad, no need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Egress input lets users exit the premises without keying in the code
Door sensor input for anti-tailgating operation
Interlocking input for connecting to a second keypad
Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
Vandal resistant, suitable for wall, post, or gooseneck mounting
IP66 Weatherproof

Type	Heavy-Duty, Outdoor, Stand-Alone Keypad
Operating Voltage	12~24 VAC/VDC
Current Draw – Standby	55mA@12VDC
Current Draw- Relays Active	220mA@12VDC
Relay Output- #1	5A@24VDC
Relay Output- #2	1A@24VDC
Relay Output- #3	1A@24VDC
IP Rating	Weatherproof IP66
Egress Inputs	N.O. Ground (P.B)
Operating Temperature	-4º~158º F (-20º~70º C)
Dimensions	5-1/4″x7-1/16″x3-3/8″ (133x180x85 mm)
Weight	3-lb 12-oz (1.7kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

USER CONTROL CHART

Click Here for our full Bluetooth Access Control product line

Seco-Larm SK-B141-PQ / SK-B241-PQ Bluetooth Access Controller Keypad with Prox

$ 275.00

Seco-Larm SK-B141-PQ / SK-B241-PQ Bluetooth Access Controller Keypad with Prox

by Seco-Larm

$ 275.00

Mounting Size

Quantity

Bluetooth Access Controller – Single-Gang Keypad with Prox.

Rethinking Access Control – Streamlined, fully app-based setup using integrated Bluetooth^® wireless technology. No codes to remember, intuitive app design for easy, visual programming. Provides convenience and security to the user and administrator. All data is secured on the device without the risks inherent with an internet connection.

No Codes to Remember – Intuitive, visual app-based programming and management, 1,000 users, device options, etc.
No Cloud, No Internet Exposure – All data secured locally on device, set and monitored by the administrator
App-Based Programming – No complicated software to install, no subscription fees
More Than Access – Control doors, gates, lighting, machinery, etc.
Secure, Integrated Bluetooth – Passcode protected, AES 128
Easy Installation – No control panel necessary
Output Modes – Timed relock (1~1,800 seconds), continually unlocked or locked, toggle
Hold Open – Hold door open with code or app (customizable)
User Customization – Individually customizable output mode / time
Multiple User Types – Permanent, scheduled, temporary, # of times
Authorized User Monitor – Displays total number of users to guard against unauthorized additions
User List Export / Import – for archiving, replicating to other devices, or for off-device editing on a computer
Three Ways to Unlock or Trigger a Device – Keypad, proximity card, or app
Unlimited Devices – Access/manage unlimited devices with one app
Easy Backup/Restore – Off-device storage / restoration / replication
Wrong-Code Lockout – Customizable # of wrong codes and time
Tamper Alarm Output – Customizable alarm timing and sensitivity
Multilingual App Interface – English, Spanish, French, Portuguese, German, Russian, Vietnamese, and Chinese
Weatherproof (IP65)

Access modes	By App / keypad / proximity card
Bluetooth radio	Bluetooth Low Energy (BLE) 4.2
Users	1,000 users / 1 administrator
Operating voltage	9~25 VDC
Current draw (max.)	62mA@12VDC, 35mA@24VDC
Inputs	Egress: N.O. Ground Door sensor: N.C. Ground
Outputs – Relay	Solid state, form C, 2.5A@30VDC
Output – Tamper	50mA@30VDC
IP Rating	IP65 Weatherproof
Operating temperature	-4°~122° F (-20°~50° C)
Dimensions	3-1/8″x4-13/16″x7/8″ (79x123x23 mm), 1-3/4″x6″x7/8″ (45x152x23 mm)
Weight	1-lb 3.8-oz (560g)

PRODUCT INFORMATION SHEET (PI) (ENGLISH)

PRODUCT INFORMATION SHEET (PI) (SPANISH)

PRODUCT INFORMATION SHEET (PI) (FRENCH)

BROCHURE

QUICK INSTALLATION/SET-UP GUIDE

SL ACCESS™ APP USER MANUAL

SL ACCESS™ OTA FIRMWARE UPDATE GUIDE

PRODUCT SPECIFICATIONS

INSTALLATION MANUAL AND ADMINISTRATOR GUIDE

USER INSTRUCTIONS

ENFORCER BLUETOOTH® ACCESS CONTROLLER USER FAQ

Securitron DEM680E Maglock Installation Instructions

Securitron DEM680E EcoMag® Delayed Egress Magnalock

from $ 872.00

Securitron DEM680E EcoMag® Delayed Egress Magnalock

by Securitron

$ 872.00

Finish

Timing Option

Quantity

Highly configurable, strong, easy-to-mount. The latest in delayed egress technology.

Features
Standard Features
• Autosensing dual voltage with
microprocessor technology –
no field adjustment required
• Patented BondSTAT magnetic
bond sensor and integrated
Door Position Switch (DPS)
• Instant release circuit
– no residual magnetism
• Easily visible LEDs indicate
status on secure side of door
• Fully integrated delay and detection
features for fast installation
of delayed egress system
• Auto calibrated door movement
detection up to 1/4" [6.35mm]
• Alarm strobe indicates
countdown; stays illuminated
post alarm until reset
• Size optimized to work
with door closers
• External alarm relay isolated
dry contact (1 A at 24 VDC)
• Configurable settings include:
x Nuisance delay times
0, 1, 2, or 3 seconds
x Irrevocable alarm times
15 or 30 seconds
x Bypass delay times
0, 15, 30, 45 seconds
x No irrevocable alarm after
bypass expiration
x Post alarm reminder
x Bypass expiration alarm
x Manual/delayed relock
x Unlocked at startup
• Required sign included
• MagnaCare® lifetime replacement,
no-fault, no questions asked warranty
Optional Features
• 8 architectural finishes
• DEM680E-CA15S
California-required 15s exit delay
• DEM680E-CA30S
California-required 30s exit delay
• DEM680E-CH Chicago-required
15s exit delay, 1s nuisance
delay, and 0s bypass time
Accessories
• Securitron mortise key switch and
cylinder included in box – supports
electric lock control, alarm panel
arming, reset and override
• ASB-680 Aluminum Shim Bracket
in Clear or Black Anodized
• CWB-680 Concrete Wood Bracket
in Clear or Black Anodized
• GDHB-680 Glass Door Header
Bracket in Clear or Black Anodized

Documents

Securitron DEM680E Delayed Egress Magnalock Catalog Page

Certifications

Securitron DEM680E Magnetic Lock CalFire Certification

Securitron DK-12 Digital Keypad

$ 141.00

Securitron DK-12 Digital Keypad

by Securitron

$ 141.00

Quantity

The DK-12 standalone keypad is ideal for lower security applications.

All-in-one keypad system for single door traffic control

The DK-12 standalone keypad is ideal for lower security applications such as traffic control. Easy to install and to program, the one-piece DK-12 supports 99 user codes, including Passage mode and Lockout mode. While primarily intended for indoor operation, an optional rain cover (WCC) and gasketed backbox (WBB) allow reliable use for exterior areas not directly exposed to rain or snow.

Securitron DM62 Electromagnetic Lock Feature Image 1

Product Features

Stainless steel backplate with 12 illuminated keys (10 digits + "*" and "#" keys)
One piece digital keypad specifically designed for control of electric locks
Easy to install with simple hand tools
Operates on low voltage AC or DC current
Audible keystroke echo
Single gang, stainless steel plate with plastic backbox
99 user code capability which is programmable from the keypad
Passage mode and Lockout mode
5 Amp SPDT timed, control relay output
Red and Green LEDs are visible indicators
Yellow LED provides programming prompt
True 10 digit operation
Optional weather cover available
Request to Exit (REX) input

Environmental

Maximum Operating Temperature: 140
Minimum Operating Temperature: -10
Outdoor Rated: No

Weights & Dimensions

_Shipping Weight: 1
_Unit Box Depth [in]: 5.75
_Unit Box Height [in]: 3.4
_Unit Box Width [in]: 3.25

Electrical

Current 12v AC: 325
Current 12v DC: 100
Current 24v AC: 325
Current 24v DC: 100
Voltage: 12/24

General

Device Options: Stand Alone Keypad

Documents

Securitron DK-12 Keypads Operating Manual

Securitron DK-12 Keypads Quick Reference Guide

Securitron DK-12 Keypads Sell Sheet

Securitron DK-12 Keypads Catalog Page

Certifications

Securitron DK-16, DK-16-P Keypads Operating Manual

Securitron DK-16 Digital Keypad

$ 299.00

Securitron DK-16 Digital Keypad

by Securitron

$ 299.00

Quantity

The tamper-resistant keypad provides true ten-key operation for use and programming.

Secure, easy-to-program, single-door control system

The DK-16 digital keypad system provides medium/high security control of electric locks in a one or two-door application where both doors have the same control needs. The tamper-resistant 3x4 keypad provides true 10-key operation for use and programming. Encased in a separate enclosure for secure installation in a protected area, the controller offers REX input and relay output for lock control, alarm shunt or other interfaces.

Product Features

12 key 3x4 keypad with engraved and paint filled numbers
Stainless steel plate
Red, green and yellow LEDs for status and programming feedback
Audible keystroke echo
Controller mounted in plastic enclosure
59 users
User code and/or hard code disable feature
5A DPDT relay output
Request to exit (REX) input
True 10 digit operation (keys are not paired), 3 LEDs and a beeper
16 ft [4.8m], 12 conductor, 22 gauge keypad cable

Environmental

Maximum Operating Temperature: 110
Minimum Operating Temperature: 32
Outdoor Rated: No

Weights & Dimensions

_Shipping Weight: 4.2
_Unit Box Depth [in]: 8.8
_Unit Box Height [in]: 12
_Unit Box Width [in]: 3.3

Electrical

Current 12v AC: 160
Current 12v DC: 160
Current 24v AC: 190
Current 24v DC: 190
Voltage: 12/24

General

Device Options: Keypad System

Documents

Securitron DK-16, DK-26 Keypads Quick Reference Guide

Securitron DK-16 Keypads Catalog Page

Securitron DK-26 Digital Keypad

from $ 306.00

Securitron DK-26 Digital Keypad

by Securitron

$ 306.00

Finish

Quantity

The DK-26 digital keypad system provides medium/high security control of electric locks in one or two-door applications where doors have the same control needs. The fully weather resistant, rugged stainless steel keypad can be mounted in most outdoor environments. Encased in a separate enclosure for secure installation, the full-featured, easy to program, DK-26 is ideal for narrow stile applications.

Digital control system for narrow stile outdoor applications

Product Features

Cast stainless steel with 11 EPDM rubber keys
Weather resistant and vandal resistant
12V or 24V/ AC or DC current
Mounts on a narrow mullion
Audible keystroke echo
True 10 digit operation (keys are not paired)
59 users with multiple entry codes
User code and hard code disable feature
Passage Mode and Lockout Mode
5A DPDT relay
Request to exit (REX) input
16 ft [4.8m], 12 conductor, 22 gauge keypad cable
3 LEDs and a bell button

Environmental

Maximum Operating Temperature: 158
Minimum Operating Temperature: -22
Outdoor Rated: Yes

Weights & Dimensions

_Shipping Weight: 5
_Unit Box Depth [in]: 8.8
_Unit Box Height [in]: 12
_Unit Box Width [in]: 3.3

Electrical

Current 12v AC: 160
Current 12v DC: 160
Current 24v AC: 190
Current 24v DC: 190
Voltage: 12/24

General

Device Options: Keypad System

Documents

Securitron DK-26 Keypads Operating Manual

Securitron DK-16, DK-26 Keypads Quick Reference Guide

Securitron DK-26 Keypads Catalog Page

Certifications

Securitron DK-26 Declaration of Conformity

Securitron DK-37W Digital Keypad

$ 161.00

Securitron DK-37W Digital Keypad

by Securitron

$ 161.00

Finish

Quantity

The DK-37 digital keypad offers Wiegand output for universal compatibility with access control systems.

Digital keypad for narrow stile applications

The DK-37 digital keypad offers Wiegand output for universal compatibility with access control systems. The fully weatherproof stainless steel keypad is designed for narrow stile applications.

Product Features

12-key cast stainless steel 2x6 keypad with silicone rubber keys
Weather resistant and vandal resistant
Dual voltage 12 or 24 VDC
Mounts on narrow mullion
Compatible with access control systems using standard Wiegand or Character output
Field selectable Wiegand or Character mode output
Red, green and yellow status LEDs
Audible keystroke echo
16 foot (4.88m) cable included

Environmental

Maximum Operating Temperature: 158
Minimum Operating Temperature: -22
Outdoor Rated: Indoor or Outdoor use

Weights & Dimensions

Shipping Weight (lbs): 1.75
Package Depth (in): 5.1
Package Height (in): 9.7
Package Width (in): 3.3
Height (in): 7
Width (in): 1.5
Depth (in): 1

Electrical

Current 12v DC: 35
Current 24v DC: 75
Voltage: 12/24

General

Device Options: Weigand Keypad

Documents

Securitron DKC Digital Keypad Controller Operating Manual

Securitron DK-37 Keypads Operating Manual

Securitron DK-37 Keypads Sell Sheet

Securitron DK-37 Keypads Catalog Page

Securitron DK-38W Digital Keypad

$ 161.00

Securitron DK-38W Digital Keypad

by Securitron

$ 161.00

Quantity

The DK-38 digital keypad offers Wiegand output for universal compatibility with access control systems

Digital keypad for indoor applications

The DK-38 digital keypad offers Wiegand output for universal compatibility with access control systems. The single gang illuminated keypad features true 10-key operation and a flush-mount stainless steel faceplate.

Product Features

12-key illuminated 3x4 keypad
Dual voltage 12 or 24VDC
Compatible with access control systems using standard Wiegand output
Single gang mounting
Red, green and yellow status LEDs
Tamper detection
True 10-digit operation
Audible keystroke echo
16 foot (4.88m) cable included

Environmental

Maximum Operating Temperature: 110
Minimum Operating Temperature: 32
Outdoor Rated: Indoor or Outdoor use

Weights & Dimensions

Shipping Weight (lbs): 10.6
Package Depth (in): 5.1
Package Height (in): 9.7
Package Width (in): 3.3
Height (in): 4.5
Width (in): 2.75
Depth (in): 1.125

Electrical

Current 12v DC: 110
Current 24v DC: 52
Voltage: 12/24

General

Device Options: Weigand Keypad

Documents

Securitron DK-38 Keypads Operating Manual

Securitron DKC Digital Keypad Controller Operating Manual

Securitron DK-38 Sell Sheet

Securitron DK-38 Keypads Catalog Page

Securitron DM62 Maglock

$ 738.00

Securitron DM62 Maglock

by Securitron

$ 738.00

Quantity

For double doors without a center mullion, the DM62 supplies two model 62 Magnalocks in a single, brushed stainless steel housing.

The ultimate 1,200 lbs. holding force Magnetic Lock double magnet for indoor/outdoor high security

The versatile Securitron DM62 electromagnetic lock offers strength and ease of maintenance for interior, perimeter and exterior access control—in a compact double magnet. This all-in-one unit is designed for double doors with no mullion. With unsurpassed durability, the Securitron DM62 will last long after most buildings wear out.

Product Features

Patented instant release circuit - no residual magnetism
Both locks can be controlled as one or individually
Surface mounts easily with minimal tools
Fully sealed electronics - tamper and weather resistant
Mounted using steel machine screws into blind finishing nuts
Architectural brushed stainless steel finish (US32D/630)
All ferrous metal surfaces plated to MIL specification
36" of jacketed, stranded conductor cable for each lock
Automatic dual voltage - no field adjustment required
Lock options include BondSTAT magnetic bond sensor and integrated door position switch

Environmental

Maximum Operating Temperature (°F): 140
Minimum Operating Temperature (°F): -40

Electrical

Current 12v DC (mA): 250
Current 24v DC (mA): 150
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 1200
Grade: Grade 2

Weights & Dimensions

Magnet Depth (in): 2.75
Magnet Height (in): 3
Magnet Length (in): 22
Shipping Weight (lbs): 16

Ratings

Outdoor Rated: No
Fire Rated: Yes
Preload Capable: No

Documents

Securitron DM62 Electromagnetic Locks Catalog Page

Securitron BondSTAT Electromagnetic Locks Brochure

Securitron Integrated DPS Sheet Brochure

Securitron DT-7 Digital Timer

$ 174.00

Securitron DT-7 Digital Timer

by Securitron

$ 174.00

Quantity

7-Day Digital Timer, 12 Events per Day, First Man in Feature, 12/24VDC/AC

Securitron EEB2 Push To Exit

$ 85.00

Securitron EEB2 Push To Exit

by Securitron

$ 85.00

Quantity

"Push to Exit" Pushbutton, for use with XMS Motion Sensor, Narrow Stile, Stainless Steel

Product Features

Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
Mounted next to door
Momentarily pressing the button releases door for 30 seconds
Retriggerable
Single Gang or Narrow Stile
SPDT 3 Amp wet N/C contacts
Operates on 12 or 24 VDC (must be same voltage as the installed lock)
For indoor use only
EEB2 includes switchable green, red and blue ADA lenses
EEB3N includes switchable green and red lenses
UL Listed

Models

Part #	Description
EEB2	EEB w/ 30 Sec. Timer - SG, Grn/Red/Handicap
EEB3N	EEB w/ 30 Sec. Timer - Narrow Stile, Grn/Red
PB2-LK	Illumination Kit for PB2E, PB5E, EEB2 Series Push Buttons
PB3-LK	Illumination Kit, Grn/Red for PB3E/EEB3N Series

Note: The red and white wires from the EEB2/3N must receive voltage from the same power supply.

Weather Option: WCC and WBB available for all Single Gang Push Buttons, Keyswitches and Keypads.

Safety Notice: Securitron's UL294 certification indicates that when the EEB is used with the XMS Motion Sensor, it meets the NFPA Life Safety Code 101 requirements for exit of access controlled egress doors.

Documents

Certifications and Listings

UL/cUL ALVY.BP7041 /UEHX7.BP7041
UL Certificate of Compliance (CoC)
ANSI/UL 294 Listed
CSA-C22.2 No.205 Listed
CSFM – California State Fire Marshal - 37740923:0104
California State Fire Marshal: 3774-0923:104
U.S. Patents:EEB2 & EEB3N - Underwriter's Laboratories: File BP7041 (UL 294)

Securitron EEB3N Push To Exit

$ 94.25

Securitron EEB3N Push To Exit

by Securitron

$ 94.25

Quantity

"Push to Exit" Pushbutton, for use with XMS Motion Sensor, Narrow Stile, Stainless Steel

Product Features

Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
Mounted next to door
Momentarily pressing the button releases door for 30 seconds
Retriggerable
Single Gang or Narrow Stile
SPDT 3 Amp wet N/C contacts
Operates on 12 or 24 VDC (must be same voltage as the installed lock)
For indoor use only
EEB2 includes switchable green, red and blue ADA lenses
EEB3N includes switchable green and red lenses
UL Listed

Models

Part #	Description
EEB2	EEB w/ 30 Sec. Timer - SG, Grn/Red/Handicap
EEB3N	EEB w/ 30 Sec. Timer - Narrow Stile, Grn/Red
PB2-LK	Illumination Kit for PB2E, PB5E, EEB2 Series Push Buttons
PB3-LK	Illumination Kit, Grn/Red for PB3E/EEB3N Series

Note: The red and white wires from the EEB2/3N must receive voltage from the same power supply.

Weather Option: WCC and WBB available for all Single Gang Push Buttons, Keyswitches and Keypads.

Documents

Certifications and Listings

UL/cUL ALVY.BP7041 /UEHX7.BP7041
UL Certificate of Compliance (CoC)
ANSI/UL 294 Listed
CSA-C22.2 No.205 Listed
CSFM – California State Fire Marshal - 37740923:0104
California State Fire Marshal: 3774-0923:104
U.S. Patents:EEB2 & EEB3N - Underwriter's Laboratories: File BP7041 (UL 294)

Securitron FMK Flex-Mount Bracket

from $ 86.00

Securitron FMK Flex-Mount Bracket

by Securitron

$ 86.00

Gate Type

Quantity

The Flex Mount Bracket System is a set of mounting brackets designed for use with the M62FG-SASM Gate Magnalock® and the GL1 Gate Lock.

Bracket kits extend access control to gates and fences

Post Shim Brackets are used to adapt both small and large Post Brackets to pole/post sizes smaller than 2" or 3" respectively in 1/8" increments - 1-7/8", 1-3/4", 1-5/8" 2-7/8", 2-3/4", 2-5/8", etc. When more than two shims are used together on a single post, welding the bracket to the pole/post is recommended. All necessary mounting hardware including four Post Shims is included with each Flex-Mount Kit.

Product Features

Permits electronics to be mounted on fence posts or gate posts
Brackets are reversible
Bracket kits include brackets, mounting hardware and post shims
Post brackets are pre-drilled
Zinc-plated steel provides durability and long life
Bolt on or weld for installation
Compatible with maximum 3" [76.2mm] round post with minimum pole separation of 1" [25.4mm]
Use with post shim brackets for smaller post sizes
MagnaCare® lifetime replacement, no-fault, no questions asked warranty

Weight & Dimensions

Shipping Weight (lbs): 13.4
Max Box Height (in): 10.1
Max Box Width (in): 3.7
Max Box Depth (in): 7.2

Application

Mounting: permits Direct Mount
Gate Type: Sliding|Swinging
Works With: M62FG and GL1

Documents

Securitron FMK-SW, FMK-SL Electromechanical Lock Accessories Installation Instructions

Securitron FMK Mounting Bracket Catalog Page

Securitron GL1-FL Gate Maglock

from $ 243.00

Securitron GL1-FL Gate Maglock

by Securitron

$ 243.00

Electric Option

Moniter Option

Quantity

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications.

Heavy Duty Gate Lock with One Ton of Holding Power

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000 lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Securitron GL1 Gate Lock Feature Image 1

Product Features

2,000 lbs holding force
Operates under preload up to 100 lbs
Automatic dual voltage - no field adjustment required
Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
Self-aligning receiver (+/- 1/2" horizontally) helps compensate for gate misalignment and sag
Tamper resistant cast housing
Optional latch status monitor
Surface mount

Strength & Durability

Holding Force (lbs): 2000

Weights & Dimensions

Height (in): 2.75
Width (in): 7.25
Depth (in): 3.25
Shipping Weight (lbs): 6

Environmental

Maximum Operating Temperature (F): 167
Minimum Operating Temperature (F): -58
Weather Resistance: Indoor/Outdoor

Electrical

Voltage: 12/24 VDC
Current 12v DC (mA): 870
Current 24v DC (mA): 720

Documents

Securitron GL1 Gate Locks Operating Manual

Securitron GL1 Gate Locks Quick Start Installation Instructions

Securitron GL1 Gate Lock Sell Sheet

Securitron GL1 Gate Locks Catalog Page

Securitron GL1 Gate Locks Gate & Fence Brochure

Certifications

Securitron GL1 Gate Lock Certificate of Compliance

Securitron GMC

$ 27.25

Securitron GMC

by Securitron

$ 27.25

Quantity

Securitron Mortise Cylinder, Key Switches, Satin Chromium Plated

Gate Lock Mortise Cylinder

Securitron iMXDa Delayed Egress Magnalock

$ 948.00

Securitron iMXDa Delayed Egress Magnalock

by Securitron

$ 948.00

Quantity

Integrated Movement Exit Delay with Advanced Technology.

Configurable, 1,200 lbs. holding force, delayed egress Magnetic Lock

iMXDa helps prevent peril to persons/patients and property loss/theft for businesses. Applications include dementia wards, hospitals, dormitories, airports, child care facilities and retail or warehouse environments. Installation requires no alteration or replacement of existing fire-rated or non-fire-rated latching hardware. False triggering is eliminated by up to 1" of authorized door movement.

Product Features

1200 lbs. holding force Magnalock
New shorter 12.5" overall length will fit most any door with a closer installed
Now with automatic dual voltage - no field adjustment required
New bracket-mounted design improves strength and installation time
Microprocessor monitored BondSTAT magnetic bond sensor (MBS) and integrated door position switch (DPS) standard
Reverse action plunger allows for adjustable alarm initiate gap from 1/8" [3.2mm] to 1" [25mm]
Bright LEDs indicate unit status from the secure side of the door
DIP switch selectable options: - Nuisance alarm times - 0 to 3 seconds - Irrevocable delay times - 15 or 30 seconds - user selectable - External bypass delay times - 0, 5, 10 or 15 seconds - Post alarm reminder - user selectable - Bypass expiration alarm - user selectable - Manual relock or delayed automatic relock (BOCA) - user selectable
External alarm relay isolated dry contact (1 A at 24 VDC)
External reset
iEXD version allows alarm initiation via an external panic device
Indoor use only
UL Listed

Environmental

Maximum Operating Temperature (° F): 104
Minimum Operating Temperature (° F): 32

Electrical

Current 12v DC (amps): 370
Current 24v DC (amps): 270
Voltage: 12/25

Strength & Durability

Holding Force (lbs): 1200
Grade: Grade 2

Weights & Dimensions

Magnet Depth (in): 2
Magnet Height (in): 3.625
Magnet Length (in): 8.9375
Shipping Weight (lbs): 15

Ratings

Outdoor Rated: No
Fire Rated: No
Preload Capable: No

Documents

Securitron iMXDa Electromagnetic Locks Operating Manual

Securitron IMXDa, iEXDa City of Chicago Operating Manual Addendum

Securitron iMXDa Electromagnetic Locks Catalog Page

Certifications

Securitron SA6635-20090613 Certificate of Compliance

Securitron SA6635-20020103 Certificate of Compliance

Securitron M32 Maglock

$ 237.85

Securitron M32 Maglock

by Securitron

$ 237.85

Quantity

Model 32 Magnalock, 600lb Holding Force, 12/24VDC, Satin Stainless Steel

Manufacturer	Securitron
BAA Qualified	Yes
Series	Securitron Durable Magnalocks
Base Material	Stainless Steel
Burglar Rated	No
Country of Origin	USA
Operating Voltage	12VDC/24VDC
Finish Title	630/US32D
Finish Description	Satin Stainless Steel
Fire Rated	3 Hours {A}
Height	1.625
Length	8
Width	1.875
Limited Warranty	Lifetime
Restrictions	None

Securitron M32-SS Cabinet Maglock

$ 366.00

Securitron M32-SS Cabinet Maglock

by Securitron

$ 366.00

Quantity

300 lbs. holding force per strike (600 lbs. total). Typical applications include: retail display cases, chemical and pharmaceutical storage cabinets, inventory cages and other cabinets that utilize out-swinging doors with a common center latching point. Indoor or outdoor operation. For 5/8" to 7/8" thick cabinet doors.

Magnetic Cabinet Lock

Now you can add asset control to your existing access control system with the durable, power efficient M32-SS. Each strike plate of the M32-SS delivers 300 lbs. of holding force (600 lbs. total). Ideal for securing large two-door cabinets, retail cases or double-door, indoor/outdoor storage applications with out-swinging doors that share a center latching point.

Securitron M32-SS Cabinet Lock Feature Image 1

Product Features

Patented instant release circuit - no residual magnetism
Surface mounts easily with a minimum of tools
Fully sealed electronics - tamper and weather resistant
Mounted using steel machine screws into blind finishing nuts
Architectural brushed stainless steel finish (US32D/630)
All ferrous metal surfaces plated to MIL specification
Hardware accessories available to configure any opening
Ten feet [3.05m] of jacketed, stranded conductor cable
Optional BondSTAT magnetic bond sensor
UL Listed

Environmental

Maximum Operating Temperature (° F): 140
Minimum Operating Temperature (° F): -40

Electrical

Current 24v DC (amps): 150
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 600

Weights & Dimensions

Magnet Depth (in): 1.625
Magnet Height (in): 1.875
Magnet Length (in): 8
Shipping Weight (lbs): 6

Ratings

Outdoor Rated: Yes
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M32-SS Cabinet Locks Template

HES Cabinet Locks Overview Brochure

Securitron M34R Recessed Maglock

$ 309.00

Securitron M34R Recessed Maglock

by Securitron

$ 309.00

Quantity

Recessed Magnetic lock for traffic control on a sliding door.

500 lbs holding force, recessed Magnetic lock

The M34R secures single sliding doors with Magnalock strength for traffic control applications within a monitored perimeter. The recessed design on the edge of the door that comes against the frame when the door is closed conceals the maglock for hidden protection that blends with the aesthetics of the opening. Works great on automatic single sliding doors or on sliding doors for patios, storage closets and more.

Environmental

Maximum Operating Temperature (° F): 140
Minimum Operating Temperature (° F): -40

Electrical

Current 12v DC (amps): 320
Current 24v DC (amps): 170
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 500

Weights & Dimensions

Magnet Depth (in): 1.625
Magnet Height (in): 1.4375
Magnet Length (in): 10.5
Shipping Weight (lbs): 5

Ratings

Outdoor Rated: No
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M34R Electromagnetic Locks Operating Manual

Securitron M34R Electromagnetic Locks Template

Securitron M34R Electromagnetic Locks Catalog Page

Securitron BondSTAT Electromagnetic Locks Brochure

Certifications

Securitron Exit Locking System California Fire Certifications

Securitron M38 Maglock

$ 345.00

Securitron M38 Maglock

by Securitron

$ 345.00

Quantity

600 lbs. holding force bracket mounted Magnetic Lock

The Securitron M38 is a 600 lbs. holding force Magnetic lock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique and simplified method of installation. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.

Securitron M38 Electromagnetic Lock Feature Image 1

Product Features

Patented instant release circuit - no residual magnetism
Surface mounts easily with mounting bracket using minimal tools
Internal wire access chamber
Mounted using steel machine screws into blind finishing nuts
Brushed aluminum finish
All ferrous metal surfaces plated to MIL specification
Automatic dual voltage - no field adjustment required
Dress Covers available
Lock options include door position switch, LED indicator and anti-tamper switch
UL Listed

Environmental

Maximum Operating Temperature (°F): 110
Minimum Operating Temperature (°F): 32

Electrical

Current 12v DC (mA): 325
Current 24v DC (mA): 175
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 600
Grade: Grade 3

Weights & Dimensions

Magnet Depth (in): 1.6875
Magnet Height (in): 2.5
Magnet Length (in): 10.5
Shipping Weight (lbs): 8

Ratings

Outdoor Rated: No
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M38, M68 Electromagnetic Locks Operating Manual

Securitron M38 Electromagnetic Lock Catalog Page

Securitron Bracket Mounted Magnalocks Accessories Brochure

Certifications

Securitron Exit Locking System California Fire Certifications

Securitron M62 Maglock

$ 298.00

Securitron M62 Maglock

by Securitron

$ 298.00

Quantity

Maglock, 1200lb Holding Force, 12/24VDC, Satin Stainless Steel

Weight	11 lbs
Manufacturer	Securitron
BAA Qualified	Yes
Series	Securitron Durable Magnalocks
Base Material	Stainless Steel
Burglar Rated	No
Country of Origin	USA
Operating Voltage	12VDC/24VDC
Finish Title	630/US32D
Finish Description	Satin Stainless Steel
Fire Rated	3 Hours {A}
Grade	Grade 1
Height	3
Length	8
Width	3.25
Limited Warranty	Lifetime
Restrictions	None

Securitron M62FG-SASM Maglock

$ 420.00

Securitron M62FG-SASM Maglock

by Securitron

$ 420.00

Quantity

The M62FG-SASM is the only heavy duty Magnalock specifically designed to secure and protect gates.

The shock absorbing 1,200 lbs. Magnetic lock solution for outdoor gates

This weatherproof unit delivers 1,200 lbs. of holding force and comes equipped with conduit fittings and a special shock absorbing strike mount (SASM). This unique design dramatically prolongs the life of the lock, the gate and other hardware by controlling excessive impact between the strike plate and the magnet. The SASM is also available as a separate retrofit kit and is compatible with M32, M62 or M82 Magnalock strike plates for areas prone to excessive force closures or slamming.

Product Features

Patented instant release circuit - no residual magnetism
Fully sealed electronics - tamper and weather resistant
Ten feet [3.05m] of jacketed, stranded conductor cable
Automatic dual voltage - no field adjustment required
Universal threaded conduit fitting is 1/2" female - 3/4" male
SASM is a simple-to-install Stainless Steel parts kit
SASM main spring provides 5/8" impact compression and 110 lbs. resistance
SASM anti-kickback spring provides 3/8" of rebound travel to return the gate to the normal "home" position

Environmental

Maximum Operating Temperature (° F): 140
Minimum Operating Temperature (° F): -40

Electrical

Current 12v DC (amps): 250
Current 24v DC (amps): 150
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 1200
Grade: Grade 2

Weights & Dimensions

Magnet Depth (in): 1.75
Magnet Height (in): 3
Magnet Length (in): 8
Shipping Weight (lbs): 12

Ratings

Outdoor Rated: Yes
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M62FG-SASM Electromagnetic Locks Catalog Page

Securitron Gate and Fence Brochure

Securitron SASM Brochure

Securitron M68 Maglock

$ 431.00

Securitron M68 Maglock

by Securitron

$ 431.00

Quantity

1,200 lbs holding force, bracket mounted Magnetic Lock

The Securitron M68 offers a built-in wire access chamber and bracket mount design for a unique method of installation. 1200 lbs. holding force Magnalock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique method of installation. Recommended for interior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.Recommended for interior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.

Product Features

Bracket mounting provides the easiest install for out-swing doors
Innovative install templating for an effortlessly accurate alignment between magnet and armature plate
Sleek, low profile and refined lines for improved aesthetics
LED shows red or green for lock status indication
Autosensing dual voltage with microprocessor technology
Wire chamber anti-tamper switch
Efficient, low power usage
Size optimized for use with door closers

Environmental

Maximum Operating Temperature (°F): 110
Minimum Operating Temperature (°F): 32

Electrical

Current 12v DC (mA): 275
Current 24v DC (mA): 150
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 1200
Grade: Grade 2

Weights & Dimensions

Magnet Depth (in): 2
Magnet Height (in): 3.625
Magnet Length (in): 10.5
Shipping Weight (lbs): 13

Ratings

Outdoor Rated: No
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M38, M68 Electromagnetic Locks Operating Manual

Securitron M68 Electromagnetic Locks Catalog Page

Securitron Bracket Mounted Magnalocks Accessories Brochure

Certifications

Securitron Exit Locking System California Fire Certifications

Securitron M82 Maglock

$ 470.00

Securitron M82 Maglock

by Securitron

$ 470.00

Mounting

Quantity

1800 lbs holding force direct mount Magnetic lock

The M82 electromagnetic lock offers unsurpassed magnetic holding strength, durability and ease of maintenance for interior, perimeter and exterior access control applications in high-risk environments. With unsurpassed durability, the M82 will last long after most buildings wear out. Flexible mounting options are available for higher security locations and other environments where extreme forces may be encountered.

Product Features

Patented instant release circuit - no residual magnetism
Surface mounts easily with minimal tools
Fully sealed electronics - tamper and weather resistant
Mounted using steel machine screws into blind finishing nuts
Architectural brushed stainless steel finish (US32D/630)
All ferrous metal surfaces plated to MIL specification
Hardware accessories available to configure any opening type include mounting brackets, housings and dress covers
Ten feet [3.05m] of jacketed, stranded conductor cable
Automatic dual voltage - no field adjustment required
BondSTAT magnetic bond sensor standard
Integrated door position switch, conduit and face mount models available
Universal threaded conduit fitting is 1/2" female - 3/4" male
UL Listed

Environmental

Maximum Operating Temperature (°F): 140
Minimum Operating Temperature (°F): -40

Electrical

Current 12v DC (mA): 350
Current 24v DC (mA): 200
Voltage: 12/24

Strength & Durability

Holding Force (lbs): 1800
Grade: Grade 1

Weights & Dimensions

Magnet Depth (in): 2.25
Magnet Height (in): 3
Magnet Length (in): 12
Shipping Weight (lbs): 16

Ratings

Outdoor Rated: Yes
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron M32, M62, M82 Replacement Strike Plate Mounting Instructions

Securitron M32, M62, M82B Electromagnetic Locks Operating Manual

Securitron M82 Electromagnetic Lock Catalog Page

Securitron BondSTAT Electromagnetic Locks Brochure

Securitron Why Buy Maglocks Flyer

Certifications

Securitron SA6635-19840703 Certificate of Compliance

Securitron Exit Locking System California Fire Certifications

Securitron MCL 24V Magnetic Cabinet Maglock

$ 175.00

Securitron MCL 24V Magnetic Cabinet Maglock

by Securitron

$ 175.00

Quantity

The MCL is ideal for extending access control to all sizes and shapes of cabinets and enclosures.

Compact Magnetic Lock for versatile asset management

The MCL is ideal for extending access control to all sizes and shapes of cabinets and enclosures that require asset protection. Typical applications include jewelry cases, museum cases, gun cabinets, pharmaceutical storage cabinets, cash drawers and any swinging or sliding door or drawer that needs asset control — indoors or out.

Product Features

Architectural brushed stainless steel finish (US32D/630)
Six feet [1.8m] of jacketed, stranded conductor cable
Fully sealed electronics - tamper and weather resistant
Mounted using steel machine screws
All ferrous metal surfaces plated to MIL specification
Surface mounts easily with a minimum of tools
Includes universal mounting bracket

Environmental

Maximum Operating Temperature (° F): 140
Minimum Operating Temperature (° F): -40

Electrical

Current 24v DC (amps): 84
Voltage: 24

Strength & Durability

Holding Force (lbs): 170

Weights & Dimensions

Magnet Depth (in): 1
Magnet Height (in): 1.125
Magnet Length (in): 4.625
Shipping Weight (lbs): 6

Ratings

Outdoor Rated: Yes
Fire Rated: No
Preload Capable: Yes

Documents

Securitron MCL Cabinet Locks Template

Securitron MCL Cabinet Lock Catalog Page

HES Cabinet Locks Overview Brochure

Certifications

Securitron MM15 Electromechanical Locks Installation Instructions

Securitron MM15 Maglock

$ 331.50

Securitron MM15 Maglock

by Securitron

$ 331.50

Quantity

Unique hybrid design, with two tons of holding power.

4,000 lbs holding force, bracket mounted, Magnetic Lock

MM15 is a hybrid design with two spring loaded, hardened steel jaws. In the event of a forced entry attempt, the mandibles rotate inward, clamping down and capturing the edges of the armature.

Securitron MM15 Gate Lock Feature Image 2

Product Features

4000 lbs holding force provides an unmatched level of security
Dual voltage (12/24) and dual current (AC/DC) operation
Mounting plate provides easy and accurate installation
Fail Safe, but can be installed with a battery backup power supply
Optional door position switch and anti-tamper switch
Optional prep for use with 1/2" conduit
Optional finishes via dress covers include Black, Polished Brass and Satin Brass
Brackets and accessories to configure any opening
Indoor use only
UL Listed

Strength & Durability

Holding Force: 4000
Grade: Grade 1

Electrical

Current 12v DC: 100
Current 24v DC: 200
Current 12v AC: 130
Current 24v AC: 250

Environmental

Maximum Operating Temperature: 140
Minimum Operating Temperature: -40

Weights & Dimensions

Shipping Weight: 6
Height: 6
Width: 2.75
Depth: 1.875

Documents

Securitron MM15 Electromechanical Locks Catalog Page

Certifications

20150929-R13976 Certificate of Compliance

HES MUNL Electric Strikes Operating Manual

Securitron MUNL Electric Strike

$ 417.95

Securitron MUNL Electric Strike

by Securitron

$ 417.95

Voltage

Quantity

Product Features

Fits standard ANSI 4-7/8" strike cutout
One model works with most North American Mortise Locks (Sargent 7900 and 8200 require tab kit model #STK-1 for retrofit installations)
Continuous duty
Fully concealed installation
Maintains deadlatch function at all times
Latch status sensor is standard
Motorized, no solenoids
Releases under preload
No cutting or altering of the jamb required

Application

Adjustability: Vertical
Surface Mounting: No cutting required
Frame Material: Metal
Latchbolt Accommodation: Up to 3/4"

Electrical

Voltage: 12|24
Monitoring Installation: Field Installable
Monitoring Options: Lock Monitor included

Strength & Durability

Static Strength (lbs): 1500
Tamper Resistant: No
Fail Safe | Fail Secure: Fail Secure

General Specifications

Warranty: SecuriCare five-year, no fault, no questions asked warranty
Lock Type: Mortise Lock

Documents

HES MUNL Series Electric Strike Catalog Page

HES MUNL Electric Strikes Specifications

EMS Electric Strike Selector Guide

HES Electric Strike Overview Brochure

Electric Strike Compatibility Chart

Securitron SAM Shear Mag Lock

$ 719.00

Securitron SAM Shear Mag Lock

by Securitron

$ 719.00

Quantity

Shear Lock, 1200lb Holding Force, 12/24VDC, Satin Stainless Steel

Manufacturer	Securitron
SKU	SAM

Grade	Grade 1
Installation	—
Origin	USA
Unit of Measure	Each
Base Material	Stainless Steel
UL Listing Type	10C, 294,
ANSI Number	294, A156.23, E08561-1000, E08571-1000, E08581-1000, E08591-1000
Restrictions	None
BAA Qualified	Yes
Limited Warranty	Lifetime
Fire Rated	3 Hours {A}

Securitron SAM2-24 Maglock

$ 526.00

Securitron SAM2-24 Maglock

by Securitron

$ 526.00

Quantity

Hidden strength at any angle ideal for traffic control. 600 lbs. holding force Shear Aligning Magnalock mounts fully concealed and is ideal for smaller applications, like cabinet doors and sliding closet doors.

600 lbs holding force, shear aligning Magnetic Lock

The compact and versatile SAM2-24 Shear Aligning Magnalock provides 600 lbs. of holding force to swinging or sliding doors. It is ideal for traffic control and to secure smaller applications, like sliding closet doors, atriums, and more. The SAM2-24 mounts fully concealed into wood, steel, aluminum or Herculite doors in any position: at the header, door edge or threshold.

Securitron SAM Electromagnetic Lock Feature Image 2

Product Features

Instant release circuit - no residual magnetism
Fully sealed electronics - tamper and weather resistant
Mounted using steel machine screws
Architectural brushed stainless steel finish (US32D/630)
All ferrous metal surfaces plated to MIL specifications
Six feet [1.8m] of jacketed, stranded conductor cable
Smaller dimensions for difficult installation areas
UL Listed

Environmental

Maximum Operating Temperature (° F): 140
Minimum Operating Temperature (° F): -40

Electrical

Current 24v DC (amps): 84
Voltage: 24

Strength & Durability

Holding Force (lbs): 600
Grade: Grade 3

Weights & Dimensions

Magnet Depth (in): 1.125
Magnet Height (in): 1
Magnet Length (in): 7.1875
Shipping Weight (lbs): 2.5

Ratings

Outdoor Rated: No
Fire Rated: Yes
Preload Capable: Yes

Documents

Securitron SAM2-24 Electromagnetic Locks Operating Manual

Securitron SAM-24 Electromagnetic Lock Catalog Page

Certifications