Sort by

Schlage NDEB Wireless Lock W/Engage Technology

from $ 745.00

Schlage NDE80 Wireless Storeroom Lock W/Engage Technology - Barzellock.com

Schlage NDEB Wireless Lock W/Engage Technology

by Schlage

$ 775.00

Lever Design

Finish

Cylinder

Quantity

500+ IN STOCK.

PLEASE CONTACT US WITH ANY QUESTIONS 718-957-0007.

US Lock Supply is a leading distributor for Schlage wireless products.

2-3/8" Backset

Gateway Link

The Schlage NDE wireless locks can be managed from anywhere using ENGAGE™ web and mobile applications.

The NDE design packages the cylindrical lock, credential reader, and access control sensors together in to a small footprint that is both easy to install and affordable. The NDE enables the use of both proximity (125 kHz) and/or smart (13.56 MHz) credentials which feature a much higher level of security and versatility.

NDE electronic wireless locks can be managed with other wireless locks including Schlage Control™ and LE. NDE locks can be updated immediately at the door using a smart phone or tablet. For even greater efficiency, NDE locks can be connected to a Wi-Fi network for overnight updates. Please visit the ENGAGE™ web and mobile app page for additional details.

Security

Electronics bring more visibility and control to the opening
Reads high security smart (13.56 MHz) as well as proximity (125 kHz) credentials
Built on proven Schlage ND Series, Grade 1 mechanical lock

Efficiency

Updates can be made immediately at the door, or automatically when connected to the Wi-Fi network
Set automatic lock and unlock schedules, user schedules and holidays
Suites with Schlage mechanical and electrified ND Series locks with many common parts

Convenience

Works with same credential used on the building perimeter
Smart credentials can be used for vending and other applications
Standard cylindrical 161L prep; installs in minutes with a Phillips screwdriver

NDE wireless locks can be managed with ENGAGE™ web and mobile applications.

ANSI/BHMA A156.25-2013 (Indoor/Outdoor)
ANSI/BHMA A156.2-2011, Series 4000, Grade 1
UL 294
UL 10C
CSA C22.2 No. 205-M1983
FCC Part 15
IC RSS-210
ADA
RoHS
ICC ANSI A117.1

Electronic Access Control Catalog

NDE wireless lock data sheet

Engage web and mobile app data sheet

Schlage ENGAGE WiFi Requirements Technical Application Solution Sheet

Schlage ENGAGE 6.1 User Guide

Schlage Orbit Knob F Series Passage, Privacy, Entrance, Dummy

from $ 16.64

Schlage Orbit Knob F Series Passage, Privacy, Entrance, Dummy

by Schlage

$ 26.00

Function

Finish

Quantity

Schlage Orbit Knob F Series Passage, Privacy, Entrance, Dummy.

FEATURES:

Non-locking - ideal for closets and rooms where locking is not needed (Passage).
Privacy locking - ideal for bedrooms and bathrooms (Privacy).
Resistant to pick and bump security attacks, certified as meeting ANSI Grade 2 standards (Entrance).
Decorative door pull, non-turning(Dummy).
Easy 3-step installation, only a screwdriver needed.
Quality materials and construction for exceptional security.
Lifetime finish and mechanical guarantee (Oil-Rubbed Bronze is only a mechanical guarantee).
Quality finishes coordinate with plumbing and lighting.

SPECIFICATIONS:

Applications: Residential single- and multi-family doors.
Certifications: ANSI A156.2, 1996, Series 4000 Grade 2.
U.L. Listed: Locks for up to three-hour fire doors available Keying: 5-pin tumbler C keyway with two nickel silver keys.
Door thickness range: 1-3/8" to 1-3/4" (35mm-44mm) standard.
Backset: Universal latch standard, fits either 2-3/8" (60mm) or 2-3/4" (70mm) backsets. 5" (127mm) backset available.
ADA compliant: No.

FINISHES:

Bright Brass, Antique Brass, Oil Rubbed Bronze,Antique Pewter, Satin Chrome, Bright Chrome, & Satin Nickel.

Schlage RC15/RC11 Proximity Reader

$ 842.40

Schlage RC15/RC11 Proximity Reader

by Schlage

$ 842.40

Mounting Size

Quantity

The RC15 wall mount is a next-generation IP reader controller designed for scalable and flexible real-time access control in perimeter and high security applications. The all-in-one device leverages the comprehensive ecosystem from Schlage and offers simplified architecture, installation and integration into open PACS solutions, including Pure Access Cloud.

Security

Electronics bring more visibility and control to the opening
Communication is secured using industry standard TLS 1.2 encryption
Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader
Accommodates interior, exterior, metal and non-metal installation environments

Efficiency

Commission via ENGAGE™ mobile app for easy configuration
Local mode results in faster response times, less network traffic and reduced host system loading
Connects to existing IT networks via a single PoE cable, reducing install time by eliminating need to run separate power to the door

Convenience

Three configurable inputs; Door Position (DPS), Request to Exit (REX), and Auxiliary (AUX)
Designed with technology to support Bluetooth, NFC and smart credentials for flexible migration paths
Credential parity standard with Schlage readers and wireless locks; ISONAS credential parity is a factory orderable option (specify CE-5902-0403)

Modes and capacity

Host mode: real time connectivity; unlimited credentials, events, time schedules, and holidays capacity*
Local mode: decisions made at the device when connection is offline or configured to local; 64,000 credentials, 5,000 events and 32 time schedules

* Host capacity is based on your host programming; contact your support team

Communications standards

10/100 Ethernet, half or full duplex
Cat5e, Cat6 or better cable
Network host or client modes supported
DHCP addressing supported
Transport Layer Security (TLS) version 1.2

Power options

Power over Ethernet (PoE), (IEEE 802.3af, Class 0)
DC power: 10-13 VDC; please note: 24 VDC is not approved for this device

Additional

Operating temperatures: -31 °F to 151 °F (-40 °C to 66 °C)
General purpose Request to Exit (REX) and Auxiliary (AUX)
LED signal for reader status
On/off audible indicator
Tamper detection via an accelerometer

For full electronic specifications, please reference the RC reader controller data sheet

Category information

Product information

Technical resources

Release Notes

Schlage RCK15 IP Reader With Keypad

$ 958.88

Schlage RCK15 IP Reader With Keypad

by Schlage

$ 958.88

Quantity

The RCK15 wall mount with keypad is a next-generation IP reader controller designed for scalable and flexible real-time access control in perimeter and high security applications. The all-in-one device leverages the comprehensive ecosystem from Schlage and offers simplified architecture, installation and integration into open PACS solutions, including Pure Access Cloud.

Security

Electronics bring more visibility and control to the opening
Communication is secured using industry standard TLS 1.2 encryption
Tamper detection via accelerometer senses any type of altering and prevents a security breach with the reader
Accommodates interior, exterior, metal and non-metal installation environments

Efficiency

Commission via ENGAGE™ mobile app for easy configuration
Local mode results in faster response times, less network traffic and reduced host system loading
Connects to existing IT networks via a single PoE cable, reducing install time by eliminating need to run separate power to the door

Convenience

Three configurable inputs; Door Position (DPS), Request to Exit (REX), and Auxiliary (AUX)
Designed with technology to support Bluetooth, NFC and smart credentials for flexible migration paths
Credential parity standard with Schlage readers and wireless locks; ISONAS credential parity is a factory orderable option (specify CE-5902-0403)

Modes and capacity

Host mode: real time connectivity; unlimited credentials, events, time schedules, and holidays capacity*
Local mode: decisions made at the device when connection is offline or configured to local; 64,000 credentials, 5,000 events and 32 time schedules

* Host capacity is based on your host programming; contact your support team

Communications standards

10/100 Ethernet, half or full duplex
Cat5e, Cat6 or better cable
Network host or client modes supported
DHCP addressing supported
Transport Layer Security (TLS) version 1.2

Power options

Power over Ethernet (PoE), (IEEE 802.3af, Class 0)
DC power: 10-13 VDC; please note: 24 VDC is not approved for this device

Additional

Operating temperatures: -31 °F to 151 °F (-40 °C to 66 °C)
General purpose Request to Exit (REX) and Auxiliary (AUX)
LED signal for reader status
On/off audible indicator
Tamper detection via an accelerometer

For full electronic specifications, please reference the RC reader controller data sheet.

Category information

Product information

Technical resources

Release Notes

Schlage S210PD Interconnected Lock

from $ 398.32

Schlage S210PD Interconnected Lock

by Schlage

$ 409.76

Finish

Lever Design

Cylinder

Quantity

Schlage S200 interconnected locks are designed to offer easy egress and dependable security with four single- or double-keyed functions each made for single motion egress. Focusing on safety, security and long-lasting performance, this lock is tested to exceed 400,000 ANSI cycles. The S200 is easy to install, service, and maintain to keep people and property secure.

Ideal for use on multifamily entrances, military-housing entrances, and small hotel/motel buildings.

Security

UL listed for 3-hour fire door
Heat-treated steel locking components for extra strength
Solid zinc bolt with hardened steel anti-saw pin
Metal wood frame reinforcer uses 3" screws to anchor deep into wood door frame to protect against kick-in attacks
Free spinning, cylinder collar resists wrenching and prying
Removeable security shield protects bolt from ice-pick attack through the door
Patented Everest 29™ S123 keyway is provided standard which prohibits unauthorized key duplication
Restricted geographically exclusive Primus upgraded security options offer advanced key control and exceptional physical security
UL 437 listed option resists drilling and physical attack on the cylinder

Aesthetics

Four lever options in solid cast zinc for strength and quality
Two escutcheon designs
Seven available finish options

Functional features

Five functions include single and double locking options plus a non-keyed dummy function
Adjustable backset has a lock-in-place helix design

Built to Last

Independent heavy-duty lever torsion springs for durability and long life
Every Schlage lock undergoes intensive testing to determine its ANSI grade level including: cycle, resistance, door impact, warped door and bolt strength tests

Non-keyed dummy functions

S290 Single dummy trim (ANSI F75)

Keyed functions

Single cylinder

S210 Entrance, single locking (ANSI F95)
S251 Entrance, double locking (ANSI F97)
S270 Classroom lock
S280 Storeroom lock (ANSI F98)

Material

Deadbolt: Zinc with hardened steel anti-saw pin insert
Deadbolt trim ring: 7/16" and 1/8" solid brass
Cylinder: Solid brass in a solid zinc housing
Deadbolt wood frame reinforcer: Metal with 3" screws standard
Latchbolt dust box: Polypropylene
Chassis: Zinc and steel components zinc dichromate plated for corrosion resistance

Door Thickness

Door thickness: 1-3/8" to 2" (35 mm to 51 mm) standard
Non-handed except Flair design

Trim Options

Four lever designs made of pressure cast zinc, plated to match product finish specification
Escutcheons: wrought brass, plated to match product finish specification

Deadbolt

1" housing diameter; 0.81" x 0.62" x 1" throw
Backset: adjustable for 2-3/8" (60 mm) or 2-3/4" (70 mm) standard for standard non-fire-rated and optional fire-rated versions; fire-rated deadbolt with 5" fixed backset optional
Faceplate: square corner 1-1⁄8" x 2-1/4" (29 mm x 57 mm) standard; round corner options available
Strike: 1-1/8" x 2-3/4" with square corners standard; ANSI, round cornered, and thimble options available

Latch

Backset: Adjustable 2-3/8" or 2-3/4" backset (60 mm or 70 mm) standard; 5" optional
Latchbolt: 1/2" (13 mm) throw brass, chrome plated standard
Faceplate: square corner 1" x 2-1/4" (25 mm x 57 mm) standard; round corner option available
Strike: 1-1⁄8" x 2-3/4" (29 mm x 70 mm) T-strike standard; ANSI and radius corner strike options available
Strike lip length: 1-1⁄8" (29 mm) standard; extended lip strikes - 1-1/4" to 2" optional

Related Product Information

Schlage Key Systems Cylinders and Keys Catalog

Product Information

Technical resources

Expert Tips on Schlage Lever Handle Removal

Training on Demand Library of Virtual Event Trainings

Allegion 101 Sercure the Door: Intro to Schlage Cylinders, Keys and Key Systems

Schlage S251PD Entrance Interconnected Lock

from $ 550.16

Schlage S251PD Entrance Interconnected Lock

by Schlage

$ 550.16

Finish

Lever Design

Cylinder

Quantity

Ideal for use on multifamily entrances, military-housing entrances, and small hotel/motel buildings.

Security

UL listed for 3-hour fire door
Heat-treated steel locking components for extra strength
Solid zinc bolt with hardened steel anti-saw pin
Metal wood frame reinforcer uses 3" screws to anchor deep into wood door frame to protect against kick-in attacks
Free spinning, cylinder collar resists wrenching and prying
Removeable security shield protects bolt from ice-pick attack through the door
Patented Everest 29™ S123 keyway is provided standard which prohibits unauthorized key duplication
Restricted geographically exclusive Primus upgraded security options offer advanced key control and exceptional physical security
UL 437 listed option resists drilling and physical attack on the cylinder

Aesthetics

Four lever options in solid cast zinc for strength and quality
Two escutcheon designs
Seven available finish options

Functional features

Five functions include single and double locking options plus a non-keyed dummy function
Adjustable backset has a lock-in-place helix design

Built to Last

Independent heavy-duty lever torsion springs for durability and long life
Every Schlage lock undergoes intensive testing to determine its ANSI grade level including: cycle, resistance, door impact, warped door and bolt strength tests

Non-keyed dummy functions

S290 Single dummy trim (ANSI F75)

Keyed functions

Single cylinder

S210 Entrance, single locking (ANSI F95)
S251 Entrance, double locking (ANSI F97)
S270 Classroom lock
S280 Storeroom lock (ANSI F98)

Material

Deadbolt: Zinc with hardened steel anti-saw pin insert
Deadbolt trim ring: 7/16" and 1/8" solid brass
Cylinder: Solid brass in a solid zinc housing
Deadbolt wood frame reinforcer: Metal with 3" screws standard
Latchbolt dust box: Polypropylene
Chassis: Zinc and steel components zinc dichromate plated for corrosion resistance

Door Thickness

Door thickness: 1-3/8" to 2" (35 mm to 51 mm) standard
Non-handed except Flair design

Trim Options

Four lever designs made of pressure cast zinc, plated to match product finish specification
Escutcheons: wrought brass, plated to match product finish specification

Deadbolt

1" housing diameter; 0.81" x 0.62" x 1" throw
Backset: adjustable for 2-3/8" (60 mm) or 2-3/4" (70 mm) standard for standard non-fire-rated and optional fire-rated versions; fire-rated deadbolt with 5" fixed backset optional
Faceplate: square corner 1-1⁄8" x 2-1/4" (29 mm x 57 mm) standard; round corner options available
Strike: 1-1/8" x 2-3/4" with square corners standard; ANSI, round cornered, and thimble options available

Latch

Backset: Adjustable 2-3/8" or 2-3/4" backset (60 mm or 70 mm) standard; 5" optional
Latchbolt: 1/2" (13 mm) throw brass, chrome plated standard
Faceplate: square corner 1" x 2-1/4" (25 mm x 57 mm) standard; round corner option available
Strike: 1-1⁄8" x 2-3/4" (29 mm x 70 mm) T-strike standard; ANSI and radius corner strike options available
Strike lip length: 1-1⁄8" (29 mm) standard; extended lip strikes - 1-1/4" to 2" optional

Related Product Information

Schlage Key Systems Cylinders and Keys Catalog

Product Information

Technical resources

Expert Tips on Schlage Lever Handle Removal

Training on Demand Library of Virtual Event Trainings

Allegion 101 Sercure the Door: Intro to Schlage Cylinders, Keys and Key Systems

SD-998SMB Surface-Mount Bracket for Rim Strikes

$ 60.00

SD-998SMB Surface-Mount Bracket for Rim Strikes

by Seco-Larm

$ 60.00

Quantity

Surface-Mount Bracket for SECO-LARM Rim Strikes

Compatible with SECO-LARM Rim Strikes.

Material	Aluminum
Dimensions	11-1/16″x9x1-7/8″ (42.2×228.5×48.2 mm)
Weight	11.3-oz (320g)

MANUAL

DOWNLOAD FILE

SDC LR100 Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100 Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Choose Exit Device Brand

Quantity

US Lock Supply Stocks the full SDC line ready to ship same day.

The LR100 is available for the following brands:

Von Duprin, SDC, Hager, Sargent, Yale, PHI, K2, Arrow, Pamex, Corbin Russwin, Dor-O-Matic, TownSteel, Marshall Best, Adams Rite, IDC, Falcon, Marks & Jackson.

SDC LR100 Datasheet

SDC LR100 Installation

SDC LR100 Exit Device Brands

SDC LR100ARK For Adams Rite Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100ARK For Adams Rite Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100ARK For Adams Rite Exit Device

Opening For	Field Retrofit Kit
36" - 48"	LR100ARK
30"	LR100ARK-EM

Models

Rim Mount	8700 / 8800 / 3700
Surface Vertical Rod	8100 / 8200 / 3100
Concealed Vertical Rod	8500 / 8600 / 3600

3700 & 8800 Rim Mount Installation

3100, 3600, 8100, 8200, 8500 & 8600 Installation

The SDC LR100 Series Electric Latch Retraction Kit enables electric access control and dogging of mechanical exit devices. When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door. The latch retraction mechanism may be activated by an access control, remote control device or building automation system. The exit device always provides uninhibited egress.

SDC LR100AWK For Arrow Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100AWK For Arrow Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100AWK For Arrow Exit Devices

Opening For	Field Retrofit Kit
36" - 48"	LR100AWK

Models

Rim Mount	S1250
Surface Vertical Rod	S1150

INSTALLATION INSTRUCTIONS LR100AWK ELECTRIC LATCH RETRACTION DEVICE KIT ARROW MODELS: S1150 & S1250

SDC LR100AWK-ED910 For Arrow Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100AWK-ED910 For Arrow Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100AWK-ED910 For Arrow ED910 Exit Devices

Opening For	Field Retrofit Kit
36"	LR100AWK-ED910

Models

Rim Mount

ED910

INSTALLATION INSTRUCTIONS LR100AWK-ED910

SDC LR100CAK For Cal-Royal Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100CAK For Cal-Royal Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100CAK For Cal-Royal Exit Devices

Opening For	Field Retrofit Kit
36"**	LR100CAK **
36"***	LR100CAK-9800***
36"****	LR100CAK-EM****

Models

Rim Mount **	7700 / F7700
Surface Vertical Rod**	7760 / F7760
Rim Mount***	LR100CAK-9800
Concealed Vertical Rod***	GLSCVR9800
Rim Mount****	2200 /F2200 / 9800 / F9800
Surface Vertical Rod****	2260 / F2260 / 9860 / F9860

Instruction Guide for the LR100CAK

SDC LR100CRK For Corbin Russwin Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100CRK For Corbin Russwin Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100CRK For Corbin Russwin Exit Devices

Opening For	Field Retrofit Kit
36"	LR100CRK
30"	LR100CRK-EM
42" - 48"	LR100CRK-42/48

Models

Rim Mount	ED5200 / ED4200
Surface Vertical Rod	ED5400
Concealed Vertical Rod	ED4800 / ED5800

INSTALLATION INSTRUCTIONS LR100CRK CORBIN/RUSSWIN ELECTRIC LATCH RETRACTION DEVICE KIT MODELS: ED4200, ED5200, ED5400 & ED5800

SDC LR100DAK For Dorma Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100DAK For Dorma Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100DAK For Dorma Exit Devices

Opening For	Field Retrofit Kit
36"	LR100DAK

Models

Rim Mount	9300 /F9300
Surface Vertical Rod	9400 / F9400

INSTALLATION INSTRUCTIONS LR100DAK DORMA ELECTRIC LATCH RETRACTION DEVICE KIT MODELS: 9300 & 9400

SDC LR100DHK For Design Hardware Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100DHK For Design Hardware Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100DHK For Design Hardware Exit Devices

Opening For	Field Retrofit Kit
36"	LR100DHK

Models

Rim Mount	1000R
Surface Vertical Rod	1000V

INSTALLATION INSTRUCTIONS LR100DHK ELECTRIC LATCH RETRACTION KIT DESIGN HARDWARE MODELS: 1000R & 1000V

SDC LR100DMK For Falcon Dor-O-Matic Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100DMK For Falcon Dor-O-Matic Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100DMK For Falcon Dor-O-Matic Exit Devices

Opening For	Field Retrofit Kit
36"	LR100DMK

Models

Rim Mount	1590
Concealed Vertical Rod	1490

INSTALLATION INSTRUCTIONS LR100DMK DOR-O-MATIC ELECTRIC LATCH RETRACTION DEVICE KIT MODELS: 1490 & 1590

SDC LR100DXK For Detex Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100DXK For Detex Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100DXK For Detex Exit Devices

Opening For	Field Retrofit Kit
36"	LR100DXK

Models

Rim Mount	10 / 40 Series
Surface Vertical Rod	20 / 50 Series
Concealed Vertical Rod	80 /81 62/ 63 Series

INSTALLATION INSTRUCTIONS LR100DXK DETEX ELECTRIC LATCH RETRACTION DEVICE KIT MODELS: 10, 20, 40, 50, 60 & 80 SERIES

SDC LR100FAK For Falcon Dor-O-Matic Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100FAK For Falcon Dor-O-Matic Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100FAK For Falcon Dor-O-Matic Exit Devices

Opening For	Field Retrofit Kit
36"	LR100FAK
30"	LR100FAK-EM

Models

Rim Mount	1790
Concealed Vertical Rod	1690

INSTALLATION INSTRUCTIONS ELECTRIC LATCH RETRACTION KIT LR100FAK FALCON (Dor-O-Matic) MODELS: 1690 & 1790

SDC LR100FRK For Falcon 24/25 Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100FRK For Falcon 24/25 Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100FRK For Falcon 24/25 Exit Devices

Opening For	Field Retrofit Kit
36"	LR100FRK

Models

Rim Mount	25-R / F-25-R / 24-R / F-24-R
Surface Vertical Rod	25-V / F-25-V / 24-V / F-24-V
Concealed Vertical Rod	25-C / F-25-C / 24-C / F-24-C

INSTALLATION INSTRUCTIONS ELECTRIC LATCH RETRACTION KIT LR100FRK FALCON IR SERIES MODELS: 24-R, 24-V, 24-C, F-24-R, F-24-V, F-24-C, 25-R, 25-V, 25-C, F-25-R, F-25-V & F-25-C

SDC LR100HK For Hager Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

$ 445.00

SDC LR100HK For Hager Exit Devices Quiet Duo Dual Latch Retraction/ Dogging Kit

by SDC

$ 445.00

Quantity

SDC LR100HK For Hager 4500 Series Exit Devices

Opening For	Field Retrofit Kit
36" - 48"	LR100HK
30"	LR100HK-EM

Models

Rim Mount	4501 - Rim
Surface Vertical Rod	4501 - SVR

INSTALLATION INSTRUCTIONS LR100HK (Hager) ELECTRIC LATCH RETRACTION DEVICE KIT MODELS: 4501-RIM & 4501-SVR

Seco-Larm PR-K1K1-AQ Proximity Keyfobs

$ 3.10

Seco-Larm PR-K1K1-AQ Proximity Keyfobs

by Seco-Larm

$ 3.10

Quantity

Description

Proximity tags sold in packs of ten

For use with all SECO-LARM proximity readers

Frequency: 125kHz (EM125)

Seco-Larm CL-210M-U3BQ Motorized Cabinet Lock

$ 39.75

Seco-Larm CL-210M-U3BQ Motorized Cabinet Lock

by Seco-Larm

$ 39.75

Quantity

Motorized Cabinet Lock

The SECO-LARM Motorized Cabinet Lock provides security for lockers, cabinets, cases, and drawers. The built-in lock and door status sensors and fail-secure operation offer additional security. The Motorized Cabinet Lock’s small size and compatibility with existing keypads or readers allow for various installations.

Electronically secure lockers, cabinets, cases, and drawers
Lock status sensor allows for monitoring whether the lock is engaged
Door status sensor allows for monitoring whether the door is closed completely
Compatible with existing keypads or readers
Spring feature gently pushes door open
Fail-secure operation
Various mounting positions
12~28 VAC/VDC Operating voltage
Low current draw:
- 69mA@12/24 VDC (standby)
- 165mA@12/24 VDC (active)
220-lb (100kg) Holding force
Two locking orientations

Operating Humidity	0~95% Non-condensing
Dimensions	Lock body: 2-3/8″x2-3/8″x7/8″ (60x60x22 mm), Rosette: 13/16″x2-3/8″x1-1/16″ (20x60x27 mm)
Holding Force	220-lb (100kg)
Operating Voltage	12~28 VAC/VDC
Current Draw	Standby: 69mA@12/24 VDC, Active: 165mA@12/24 VDC
Housing material	Polyamide
Operating Temperature	14°~113° F (-10°~45° C)
Weight	3-oz (93g)
Relock Delay	2~5 Seconds

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

Seco-Larm DH-151SQ / DH-171SQ Mag Door Holder

from $ 48.99

Seco-Larm DH-151SQ / DH-171SQ Mag Door Holder

by Seco-Larm

$ 48.99

Mounting

Quantity

Magnetic Door Holder – Surface-Mount OR Flush-Mount UL Listed

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.

For use with door closers to control the release and closing of residential, commercial, and public area doors
Adjustable armature plate reduces installation time and adjusts to door alignment changes
Low profile design
Holding force – 33-lb (15kg)
3 voltages: 12/24 VAC/VDC, and 120VAC
Cast aluminum faceplate
No residual magnetism for easy release
Built-in voltage spike suppressor
Use with SECO-LARM door closers
Optional extension bars available: 3/4″, 1″, 4″, 7″ (19mm, 25mm, 102mm, 178mm)
Use with SECO-LARM door closers SD-C121-S, SD-C131-SQ, SD-C101-SGQ, or SD-C101-SBAQ

Holding Force	33-lb (15kg)
Installation	Surface-mount
Operating Voltage	12/24 VAC/VDC, 120VAC
Current Draw	52mA@12VAC, 60mA@12VDC, 27mA@24VAC, 31mA@24VDC, 24mA@120VAC
Magnet Box Weight	1-lb 6.4-oz (920g)
Door Armature Weight	8.1-oz (230g)
Electromagnet Dimensions	2-3/4″ x 4-9/16″ x 3″ (70 x 116.5 x 76 mm)
Armature Dimensions	2-9/16″ x 2-9/16″ x 1-9/16″ (65 x 65 x 40 mm)

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

Seco-Larm DRN-108-2TB 4K Network Video Recorder

$ 275.00

Seco-Larm DRN-108-2TB 4K Network Video Recorder

by Seco-Larm

$ 275.00

Quantity

4K Network Video Recorder – 8-Channel, 2TB HDD

The ENFORCER Network Video Recorder offers 4K and H.265 High Efficiency Video Coding, reducing bandwidth and storage requirements without giving up video quality. These NVRs are perfect for a wide range of applications due to their cost-effectiveness and simple-to-install design.

Compatible with up to 8MP (4K) IP Cameras
QR code and Wizard assistance for easy first-time setup
Plug-and-Play
Built-in PoE Ports (IEEE 802.3af/at)
VGA and HDMI outputs with up to 4K resolution
Other HDD sizes available by special order, including 1/2/4/6/8/10 TB
ONVIF® profiles S conformant
Tri-stream encoding
Live view recording and playback up to 4K@30FPS
P2P for simple remote connections using PC or mobile device

AI Functions

Face detection
Human & vehicle detection
Perimeter intrusion detection
Line crossing detection
Stationary object detection
Cross counting
Heat map
Crowd density detection
Queue length detection

With EV-N2806-2W4WQ 8MP Turret Camera (optional)

Facial recognition
License plate detection
License plate recognition

Resolution	8MP (4K), 5MP, 2MP (1080p), 1.3MP (960p), 1.0MP (720p)
Incoming bandwidth	76Mbps
Outgoing bandwidth	32Mbps
HDMI Output	1024×768, 1280×720, 1280×1024, 1440×900, 1920×1080, 2560×1440, 3840×2160 (4K)
VGA Output	1024×768, 1280×720, 1280×1024, 1440×900, 1920×1080
Frame rate	4K: Up to 30FPS, 4MP: Up to 60FPS, 2MP: Up to 120FPS
Compression	H.265+, H.265, H.264+, H.264
AI	Support
Playback functions	Fast forward / backward (2x, 4x, 8x, 16x), Slow forward (1/2x, 1/4x, 1/8x, 1/16x)

Seco-Larm DRN-K108-06 NVR and Camera Kit

$ 675.00

Seco-Larm DRN-K108-06 NVR and Camera Kit

by Seco-Larm

$ 675.00

Quantity

NVR and Camera Kit — 4K 8-Channel NVR + 6 IP 5MP Cameras + 2TB HDD

ENFORCER Surveillance Kits offer all the elements of an easy plug-and-play installation. The included IP cameras provide excellent picture quality with True Wide Dynamic Range (WDR) and Digital Noise Reduction (3DNR). The NVR features built-in AI functions for multiple security purposes. The kits are suitable for various applications due to their cost-effectiveness and simple-to-install design.

NVR Features

EV-N2506-2W4WQ 5MP 2.8mm Turret Cameras included
Compatible with 8MP (4K) IP Cameras
Wizard assistance for easy first time setup
Plug-and-Play
Built-in PoE ports (IEEE 802.3af/at)
VGA and HDMI outputs with up to 4K resolution
Includes one 2TB HDD
Other HDD sizes available by special order, including 1/2/4/6/8/10 TB
ONVIF® profile S conformant
Easy app setup with QR code
Tri-stream encoding
Live view recording and playback up to 4K@30FPS
P2P for simple remote connections using PC or mobile device
9 AI functions including human and vehicle detection (additional functions with EV-N2806-2W4WQ 8MP Turret Camera)

Camera Features

1/2.7″ 5MP SmartSens CMOS sensor
30FPS@5MP (2880×1620)
2.8mm lens
H.265, H.264, and MJPEG
True Wide Dynamic Range (WDR)
Digital Noise Reduction (3DNR)
True Day & Night function with ICR module
IP66 Weatherproof
IR Range 98′ (30mm)
ONVIF® profile G, S, and T conformant
Smart IRs adjust IR strength to conditions

AI Functions

Face detection
Human & vehicle detection
Perimeter intrusion detection
Line crossing detection
Stationary object detection
Cross counting
Heat map
Crowd density detection
Queue length detection

With EV-N2806-2W4WQ 8MP Turret Camera (optional)

Facial recognition
License plate detection
License plate recognition

Camera Specifications

Image sensor	1/2.7″ 5MP SmartSens CMOS sensor
Effective pixels	2880(H)x1620(V)
Scanning system	Progressive scan
Electronic shutter speed	Auto, manual; 1/5 s to 1/20,000 s
Minimum illumination	Color: 0.1Lux at F1.2 (AGC on) 0Lux with IR on
IR Distance	Distance up to 98′ (30m)
IR On/Off control	2pcs (850nm) LEDs
Focal length	2.8mm
Maximum aperture	F1.6
Field of view	Horizontal: 110°, Vertical: 58°, Diagonal:133°
Bit rate control	CBR/VBR
Bit rate	Main stream: 256 to 8192 Kbps, Sub stream: 128 to 4096 Kbps, Mobile stream: 8 to 1536 Kbps
Backlight	Disable (default) BLC, HLC, True WDR
White balance	Auto
Gain control	Auto
Noise reduction	3DNR
Smart IR	Support
Image rotation	0″, 180″
Mirror	Disable, vertical, horizontal, all
Privacy masking	Off, on (4 areas, rectangle)

NVR Specifications

IP Camera included	6x EV-N2506-2W4WQ

Video

Camera support	Up to 8MP (4K)
Incoming bandwidth	76Mbps
Outgoing bandwidth	32Mbps
HDMI Output	1024×768, 1280×720, 1280×1024, 1440×900, 1920×1080, 2560×1440, 3840×2160 (4K)
VGA Output	1024×768, 1280×720, 1280×1024, 1440×900, 1920×1080
Frame rate	4K: Up to 30FPS, 4MP: Up to 60FPS, 2MP: Up to 120FPS
Compression	H.265+, H.265, H.264+, H.264
AI	Support
Playback functions	Fast forward / backward (2x, 4x, 8x, 16x), Slow forward (1/2x, 1/4x, 1/8x, 1/16x)

User Interface

Local	UI5.0
Web	IE10/11, Safari V12.1 above, Firefox V.52 above, Google Chrome V.57 above, Edge V.79 above

Auxiliary Interface

HDMI Output	1 Output
VGA Output	1 Output
PoE Input	8x RJ45
USB	USB 2.0 x 1 front & 1 rear
Alarm I/O	None
Included HDD	2TB SATA
Internal storage capacity	1 SATA HDD, up to 10TB

General

Power supply	48VDC@1.5A
Power consumption	6W
Dimensions (WxDxH)	11-11/16″ x8-15/16″ x2-1/16″ (300x227x53 mm)
Operating temperature	32°~104°F (0°~40°C)
Humidity	Less than 90%RH

NVR PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

NVR MANUAL

DOWNLOAD FILE

NVR WEB ADMINISTRATION MANUAL

DOWNLOAD FILE

CAMERA PRODUCT INFORMATION SHEET (EV-N2506-2W4WQ, PI)

DOWNLOAD FILE

CAMERA MANUAL (EV-N2506-2W4WQ)

DOWNLOAD FILE

Seco-Larm E-941DA-1K2Q 1200-LB Double Maglock

$ 189.99

Seco-Larm E-941DA-1K2Q 1200-LB Double Maglock

by Seco-Larm

$ 189.99

Quantity

1,200-lb Electromagnetic Lock, Double-Door, UL Listed

The E-941Dx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

1,200-lb (545kg) Holding force per door
No residual magnetism
MOV Surge protection
Anodized aluminum housing (US 28)
Adjustable mounting bracket
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
Detachable faceplate for easy access to wiring
12/24VDC Selectable
Multiple UL listings
- - - UL294 Access Control System Units – USA
    - UL10C Positive Pressure Fire Test – USA
    - UL10B Fire Test of Door Assemblies – USA
    - ULC-S104 Fire Test of Door Assemblies – Canada
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECOLARM for details.

Holding force	1200-lb (545kg) per door
Operating voltage	12 /24 VDC (selectable)
Current draw	500mA@12VDC per door (1A total) 270mA@24VDC per door (540mA total)
Operating temperature	32º~120º F (0º~49º C)
Electromagnet dimensions	21″ x 2-5/8″ x 1-5/8″ (536x67x42 mm)
Armature dimensions	7-1/4″x2-3/8″x5/8″(185x61x16 mm)
Weight	21-lb (10kg)
Destructive attack	Level I
Line security	Level I
Standby power	Level I
Endurance	Level IV

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

MOUNTING TEMPLATE

DOWNLOAD FILE

Seco-Larm E-941S-1K2/ZQ Z Bracket For 1200-LB Maglock

$ 61.99

Seco-Larm E-941S-1K2/ZQ Z Bracket For 1200-LB Maglock

by Seco-Larm

$ 61.99

Quantity

Z-Bracket for 1,200-lb Series Electromagnetic Locks

Includes one “Z” bracket and one “L” bracket for mounting on inswing doors. The “Z” bracket consists of two parts and is adjustable for flexible positioning of the armature plate. Also includes cover plate to hide mounting screws.

DIAGRAM

DOWNLOAD FILE

Seco-Larm E-941S-600/ZQ Z Bracket For 600-LB Maglock

$ 47.75

Seco-Larm E-941S-600/ZQ Z Bracket For 600-LB Maglock

by Seco-Larm

$ 47.75

Quantity

Z-Bracket for 600-lb Series Electromagnetic Locks

DIAGRAM

DOWNLOAD FILE

Seco-Larm E-941SA-1200 Single Maglock

$ 97.99

Seco-Larm E-941SA-1200 Single Maglock

by Seco-Larm

$ 97.99

Quantity

1,200-lb Electromagnetic Lock, UL Listed

The E-941Sx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

1,200-lb (545kg) Holding force
No residual magnetism
MOV Surge protection
Anodized aluminum housing (US 28)
Adjustable mounting bracket
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
Detachable faceplate for easy access to wiring
12/24VDC Selectable
Multiple UL listings
- - UL294 Access Control System Units – USA
  - UL1034 Burglary Resistant Electric Lock – USA
  - UL864 Fire Alarm Systems – USA
  - UL10C Positive Pressure Fire Test – USA
  - UL10B Fire Test of Door Assemblies – USA
  - ULC-S104 Fire Test of Door Assemblies – Canada
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECO-LARM for details.

Operating voltage	12 /24 VDC (selectable
Current draw	500mA@12VDC, 250mA@24VDC
Door thickness (max.)	1-13/16″ (46mm)
Holding force	1,200-lb (545kg)
Dimensions – Magnet	10-1/2″x2-5/8″x1-9/16″ (267x67x40 mm)
Dimensions – Mounting Plate	10-1/2″x1-9/16″x1/4″ (267x40x5.5 mm)
Dimensions – Armature Plate	7-1/4″x2-3/8″x5/8″ (185x61x16 mm)
Operating humidity	0~85 (non-condensing)
Operating temperature	32°~120° F (0°~49° C)
Lock surface temperature	≤ Ambient temperature ± 68° F (20° C)
Destructive attack	Level I
Line security	Level I
Standby power	Level I
Endurance	Level IV
Weight	4-lb 6-oz (2kg)

UL 1034 Rating

Static strength	1,000-lb
Dynamic strength	70 ft-lb
Endurance	250,000 cycles

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

MOUNTING DIAGRAM

DOWNLOAD FILE

Seco-Larm E-941SA-600 Single Maglock

from $ 79.99

Seco-Larm E-941SA-600 Single Maglock

by Seco-Larm

$ 79.99

Finish

Quantity

600-lb Electromagnetic Lock, UL Listed

600-lb (272kg) Holding force
No residual magnetism
MOV Surge protection
Anodized aluminum housing (US 28)
Adjustable mounting bracket
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
Detachable faceplate for easy access to wiring
12/24VDC Selectable
Multiple UL listings
- - UL294 Access Control System Units – USA
  - UL1034 Burglary Resistant Electric Lock – USA
  - UL864 Fire Alarm Systems – USA
  - UL10C Positive Pressure Fire Test – USA
  - UL10B Fire Test of Door Assemblies – USA
  - ULC-S104 Fire Test of Door Assemblies – Canada
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECO-LARM for details.

Operating voltage	12/24 VDC (selectable)
Current draw	500mA@12VDC, 250mA@24VDC
Door thickness (max.)	2″ (50mm)
Holding force	600-lb (272kg)
Dimensions – Magnet	9-13/16″x1-11/16″x1″ (250x43x25 mm)
Dimensions – Armature Plate	7-1/4″x1-1/2″x1/2″ (185x38x12 mm)
Operating humidity	0~85 (non-condensing)
Operating temperature	32°~120° F (0°~49° C)
Lock surface temperature	≤ Ambient temperature ± 68° F (20° C)
Destructive attack	Level I
Line security	Level I
Standby power	Level I
Endurance	Level IV
Weight	4-lb 6-oz (2kg)

UL 1034 Rating

Static strength	500-lb
Dynamic strength	50 ft-lb
Endurance	250,000 cycles

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

MOUNTING TEMPLATE

DOWNLOAD FILE

Seco-Larm E-941SA-80Q 80LB Maglock

$ 40.95

Seco-Larm E-941SA-80Q 80LB Maglock

by Seco-Larm

$ 40.95

Quantity

80-lb Electromagnetic Lock

When power is applied to an electromagnetic lock, it activates a built-in electromagnet that attracts a door-mounted steel armature plate, preventing the door from opening. When power is removed, the electromagnet releases the armature, allowing the door to open.

ETL, Conforms to UL Std. 294
80-lb (36kg) Holding force
For spaces where small size is required, including cabinets, drawers, etc.
Low current draw
No residual magnetism
MOV Surge protection
Complete mounting hardware for typical installations

Holding Force	80-lb (36kg)@12VDC / 110-lb (51kg)@24VDC
Operating Voltage	12~24 VDC±10%
Current Draw	85mA@12VDC / 165mA@24VDC
IP Rating	Waterproof IP67
Operating Temperature	14º~131º F (-10º~55º C)
Certification	CE
Electromagnet Dimensions	2-3/4″ x 1-1/4″ x 13/16″ (70 x 31 x 20 mm)
RoHS Compliance	Yes
Armature Dimensions	2-3/8″ x 1-1/4″ x 3/8″ (60 x 31 x 9 mm)
Case Shipping Weight	46-lb 6-oz (22.0kg)
Weight	14.4-oz (410g)
Case Quantity	50 pcs

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

Seco-Larm E-942F1300/ZQ Z Bracket for 1200-LB Outdoor Maglock

$ 56.99

Seco-Larm E-942F1300/ZQ Z Bracket for 1200-LB Outdoor Maglock

by Seco-Larm

$ 56.99

Quantity

Z-Bracket for 1,200-lb Series Outdoor Electromagnetic Locks

For mounting on in-swing doors.
Adjustable for flexible installation of armature plate

DIAGRAM

DOWNLOAD FILE

Seco-Larm E-942FC-1300 Maglock for Gate Lock

$ 139.25

Seco-Larm E-942FC-1300 Maglock for Gate Lock

by Seco-Larm

$ 139.25

Quantity

1,200-lb Electromagnetic Gate Lock, Face Mount, UL Listed

1,200-lb (545kg) Holding force
No residual magnetism
MOV Surge protection
Face-mount
For sliding or swinging gates
Can be mounted horizontally or vertically
For indoor and outdoor applications
Maintenance-free, factory-sealed design
Waterproof (IP67) and vandal resistant
Dual-threaded conduit fitting
Attractive stainless steel housing
6.5-ft (2m) Hookup cord
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
12/24VDC Selectable
Multiple UL listings
- - - UL10C Positive Pressure Fire Test – USA
    - UL10B Fire Test of Door Assemblies – USA
    - ULC-S104 Fire Test of Door Assemblies – Canada
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECOLARM for details.

Holding Force	1,200-lb (544kg)
Operating Voltage	12VDC or 24VDC ±10%
Current Draw	500mA@12VDC, 250mA@24VDC
IP Rating	Waterproof IP67
Operating Temperature	14º~131º F (-10º~55º C)
Electromagnet Dimensions	8″ x 2-1/2″ x 1-9/16″ (203x64x40 mm)
Armature Dimensions	7-1/4″x2-3/8″x5/8″ (185x60x16 mm)
Weight	11-lb (5kg)

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

DIAGRAM

DOWNLOAD FILE

Gate does not lock	Check to make sure the wires are secure Check that the power supply is connected and operating Make sure the unit is wired correctly
Gate locks, but can easily be forced open	Make sure the electromagnet and armature plates are properly aligned. Make sure the contact surfaces of the electromagnet and armature plates are clean and free from rust. Check the power leads with a meter, and make sure 12VDC or 24VDC is present
Delay in gate releasing	The electromagnet is fitted with a metal oxide varistor to prevent interference, so do not install a second diode.

Seco-Larm E-942FC-600SQ Face Mount Weldable Maglock for Gate

$ 212.00

Seco-Larm E-942FC-600SQ Face Mount Weldable Maglock for Gate

by Seco-Larm

$ 212.00

Quantity

600-lb Electromagnetic Gate Lock, Face Mount, Weldable

Electromagnetic Gate Lock with brackets for armature and magnet. The E-942FC-600SQ is primarily designed for swinging gates.

600-lb (272 kg) Holding force
No residual magnetism
MOV Surge protection
Face mounting
For sliding or swinging gates
Weld or bolt brackets directly to the gate
Brackets are zinc-plated for corrosion resistance
Water- and vandal-resistant attractive stainless-steel black finish to match most gates
Maintenance-free, factory-sealed design
Fail-safe operation (releases if power is removed)
Waterproof (IP67) and vandal resistant for indoor and outdoor applications
Dual-threaded conduit fitting
Attractive stainless steel housing
Junction box with 4 knockouts
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
12/24VDC Selectable
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECOLARM for details.

Holding Force	600-lb (272kg)
Operating Voltage	12VDC or 24VDC
Current Draw	500mA@12VDC, 250mA@24VDC
IP Rating	IP67 Waterproof
Operating Temperature	14º~131º F (-10º~55º C)
Certification	RoHS, cUL, UL, CE
Weight	10.40-lb (4.75kg)
Maglock & Armature Weight (Approx.)	6.4-lb (2.9kg)
Bracket Weight (Approx.)	3.95-lb (1.8kg)
Type	Electromagnetic Gate Lock, 600-lb Holding Force, Face Mount, Weldable

Seco-Larm E-960-D90Q Long Range Photobeam Detector

$ 77.25

Seco-Larm E-960-D90Q Long Range Photobeam Detector

by Seco-Larm

$ 77.25

Quantity

Twin Photobeam with Laser Beam Alignment, 90ft outdoors

Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors

Built-in laser beam alignment system speeds accurate, reliable positioning
Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
Weatherproof (IP55), sunlight-filtering case for indoor & outdoor use
Anti-frost system so that beam functions even in extreme conditions
Automatic input power filtering with special noise rejection circuitry
NC/NO alarm output
N.C. tamper circuit included
Non-polarized power inputs
Quick, easy installation with built-in laser beam alignment system
Response time adjustable for nearly all situations
Response time is set at the factory to the shortest time (50ms)

Type	Twin Photobeam Detectors with Laser Beam Alignment
Current Draw	64mA max.
Sensing Range	Outdoor- 90′ (30m), Indoor- 190′ (60m)
Operating Voltage	10~30VAC/VDC (Non-polarized)
IP Rating	Weatherproof IP55
Interupt Speed	50msec~700msec (variable)
LEDs – Red	ON indicates transmitter and receiver not aligned or beam is broken
LEDs – Yellow	ON indicates weak receiver signal or beam is broken
LEDs – Green	ON indicates unit connected to power
Detection System	Simultaneous break of 2 beams
Alarm Output	NO/NC relay, 1A @ 120VAC, min. 1 sec.
Tamper Output	NC. switch, 1A@120VAC
Case material	PC Resin
Laser Wavelength	650nm
Operating Temperature	-13º~+131º F (-25º~+55º C)
Laser Output Power	5mW
Alignment Angle	Horizontal (+/-)90º, Vertical: (+/-)5º
Weight	2.5 lbs. (1.1kg)

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

Seco-Larm EAP-5D1Q Power Supply

$ 144.05

Seco-Larm EAP-5D1Q Power Supply

by Seco-Larm

$ 144.05

Quantity

Access Control Power Supply, 1 Output, 5A Total

The SECO-LARM EAP-5D1Q power supply is specifically designed for an access control system’s electronic locks and accessories. The power supply centralizes the power sources of access control equipment. It includes two supervision relays that can be used to integrate with other systems such as an alarm control panel. Robust fault response and indication also includes gradual shutdown on output overload as well as immediate shutdown on output short, signaled by flashing red LED and with auto-recovery once output short or overload is removed.

AC Power failure supervision relay
Battery failure / low battery supervision relay
Auxiliary output relay
Relays rated 3A@24VDC, 3A@120VAC
Adjustable voltage range to compensate for voltage drop
Built-in backup battery charger (battery not included)
Selectable 2.2k 9 End-of-Line (EOL) resistor for AC failure and battery failure supervision relays via DIP switch
Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC failure supervision relay via DIP switch
LED Status indicator for AC input, DC output and channel outputs

Power

Field selectable for 12VDC or 24VDC output
Operating Input voltage: 110~240 VAC
Field-selectable 12 or 24 VDC output
Total continuous output current: 5A@12VDC, 2.5A@24VDC
AC Input fuse rated at 3.15A

Enclosure

Heavy-duty steel case with ventilation holes
Enclosure large enough to fit two (2) 12V/12Ah batteries
Removable steel cover for easy access to power connections
6ft Power cord and battery leads included
Dimensions: 14¹³/₁₆“x14⁵/₁₆“x4¹/₈” (377x363x105 mm)

Input Voltage	110~240VAC
Output Voltage	12 or 24VDC selectable via DIP switch
Adjustable Output Voltage Range	12~13 @ 12VDC setting, via VR switch, 23~25 @ 24VDC setting, via VR switch
Number of Outputs	1
Total Supply Current	5A@12VDC / 2.5A@24VDC
Input Fuse Rating	3.15A ( glass fuse, AC)
LED Status Indicator	AC input ( Green ), DC Output ( Red )
End-of-Line Resistor (EOL)	Selectable ON ( 2.2KΩ) or OFF via DIP switch
AC-Fail Relay Delay Timer	Selectable @ 5sec, 5min or 5hr via DIP switch
Supervision Relays	Contact Rating: 3A@24VDC Dry Relay Output

PRODUCT INFORMATION SHEET (PI)

DOWNLOAD FILE

MANUAL

DOWNLOAD FILE

Filters

Products

500+ IN STOCK.

PLEASE CONTACT US WITH ANY QUESTIONS 718-957-0007.

Surface-Mount Bracket for SECO-LARM Rim Strikes

MANUAL

Motorized Cabinet Lock

PRODUCT INFORMATION SHEET (PI)

MANUAL

Magnetic Door Holder – Surface-Mount OR Flush-Mount UL Listed

PRODUCT INFORMATION SHEET (PI)

MANUAL

4K Network Video Recorder – 8-Channel, 2TB HDD

AI Functions

With EV-N2806-2W4WQ 8MP Turret Camera (optional)

PRODUCT INFORMATION SHEET (PI)

NVR MANUAL

NVR WEB ADMINISTRATION MANUAL

NVR and Camera Kit — 4K 8-Channel NVR + 6 IP 5MP Cameras + 2TB HDD

NVR Features

Camera Features

AI Functions

With EV-N2806-2W4WQ 8MP Turret Camera (optional)

Camera Specifications

NVR Specifications

Video

User Interface

Auxiliary Interface

General

NVR PRODUCT INFORMATION SHEET (PI)

NVR MANUAL

NVR WEB ADMINISTRATION MANUAL

CAMERA PRODUCT INFORMATION SHEET (EV-N2506-2W4WQ, PI)

CAMERA MANUAL (EV-N2506-2W4WQ)

1,200-lb Electromagnetic Lock, Double-Door, UL Listed

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Z-Bracket for 1,200-lb Series Electromagnetic Locks

DIAGRAM

Z-Bracket for 600-lb Series Electromagnetic Locks

DIAGRAM

1,200-lb Electromagnetic Lock, UL Listed

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING DIAGRAM

600-lb Electromagnetic Lock, UL Listed

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

80-lb Electromagnetic Lock

PRODUCT INFORMATION SHEET (PI)

MANUAL

Z-Bracket for 1,200-lb Series Outdoor Electromagnetic Locks

DIAGRAM