Product Catalog

DORMA Solutions
• 1500 lb (680 kg) holding force
• Modular design allows compatibility with most locks without
having to order special faceplates
• Adjustable dead bolt keeper and deadlatch ramp
• Accommodates 3/4" (19.1 mm) latch projection
• Horizontal adjustment (up to 1/4" or 6.4 mm) relieves sideload pressure, ensuring proper latch alignment
• Faceplate included for centerline latch entry
• Unique sliding shim design for up to 1/8" ( 3.2 mm)
horizontal adjustment for misaligned frames
• Vertical adjustability of strike for precise positioning of lockset
• Accommodates up to 1" dead bolt*
• Field-selectable voltage input—12 or 24 VDC or 12–24 VAC
• Anti-tamper security screws
• All installation drivers included
• Optional latch monitor kit
• Low current draw (.19 A @ 24 VDC)
• Plug-in wire connector
• Trim plate included
• Non-handed
• 630 stainless steel finish
*Night-latch function only, bolt will not release.
Listings & Approvals
• UL/CUL listed under their continuing reinspection programs
and conforms to standards UL 1034 and CVXY for burglary
resistant electric door strikes, UL10C GXAY for positive
pressure fire testing, 3 hour rated
• ANSI/BHMA 156.31, Grade 1 pending
• CSFM pending
• Contributes to U.S. Green Building Council, LEED® MR
Credits 2.1, 4.1, 4.2, and 5.1
T

The DORMA ES96F fire-rated offset and centerline latch entry electric strike combines strength and convenience in an attractive design. The unique saw-tooth adjustment locator design of the ES96F allows the installer to move the dead bolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There is no need to order special faceplates—the strike can be adjusted to work with any mortise lock. Everything needed is in the box, including a separate faceplate for centerline latch entry. For easy installation, the strike's shim design adjusts vertically on the keeper to align with any latch location, providing up to 1/8" horizontal adjustment. Also included are a trim plate for inconsistent frame cuts, a hands-free adhesive backed template, and all the needed drivers to install the strike. The plug-in latch monitor switch option can be added in the field if monitoring is specified after installation

WS-1 SQ4 — Tamper resistant 4-1/2" × 4-1/2" wall plate with a normally open switch. Includes a heavy duty injection molded black ABS mounting box. Satin stainless steel wall plate with blue engraving. Wall plate displays the accessibility symbol and "PRESS TO OPEN." Fits a standard 4" × 4" electrical box. Must be hard wired. Flush design allows the optimum in weather resistance, in surface, or recessed applications.

IN STOCK

Nova-D RFID Smart Deadbolt

Product videos

Combination Chamber M56/M63

 Concealed Door Position Switch SPDT rated @ .1 amp @ 30 volts

1100 Series Electromagnetic Lock, 1200 LB Holding Force, 12/24 VDC, with SPDT Door Position Switch

Electromagnetic locks, surface mounted for outswing or inswing single or double doors. Size: 1-1/2"D x 2-3/4"H x 11"L Single or 22"L Double 1-1/2"D x 2-3/4"H x 10-1/2" L (2011-390 only) Multi-voltage field selectable 12/24 VAC/VDC Current Draw: 384 mA @ 12VDC Single / 768 mA Double 217 mA @ 24VDC Single / 434 mA Double Adjustable Relock Time Delay (Former TD Option) is standard on all models.

2011 Installation Instructions

New “upscale” low profile electromagnetic locks, surface mounted for single and double outswing or inswing doors. Seamless one-piece lock housings mount with an adjustable baseplate for quicker installations. Armatures utilize high-impact plastic housings, with incorporated foam pads to reduce noise. When ordered with DSM, concealed disc magnets are included at each end of the armature housings. Size: 1-1/2”D x 2-1/16”H x 12-3/4”L Single or 25-1/2”L Double Multi-voltage field selectable 12/24 VDC/VAC Current Draw: 583 mA @ 12VDC Single / 1166 mA Double 335 mA @ 24VDC Single / 670 mA Double Adjustable Relock Time Delay (Former TD Option) is standard on all models.

5100
Devini

4100
Safele

4200
Tafele

4900
Toluire

Specifications

• Hand: Non handed, “push" labels for each hand supplied standard
• Functions: See trim selection chart on the Options tab
• Finishes: US28, DC13.
• Strikes: TD35 strike supplied standard.
• Latchbolt: 1 1/4" high x 3/4" projection, hardened steel.
• Dogging Feature: Quarter turn hex key dogging
• Cylinder: Key entry (NL) or hold back (HB) feature available, simplified cartridge mounting for most standard rim cylinders, furnished in DC35 if not specified Please Call For Cylinder Options.
• Sizes: 36", Please Call For Size Options 42", 48"
• Doors: 1 3/4" thick metal or wood, specify if other than 1 3/4"
• Projections: 2 3/4" maximum, 2" when dogged. Pushbar height is 3"
• Stile: 2" minimum
• Electric Functions: EL - electric latch retraction, include "S". Requires PS873-2 minimum power supply. S - latch bolt monitor switch (SPDT). Conversion kits available. Devices are handed.
• Fasteners: All mounting screws are concealed
• End Caps: Durable zinc die cast, powder coated
• ANSI: Certified ANSI A156.3-2001 Grade 1 standards
• Shim Kits: 1/2" riser is available
• Retractors: Used for cylinder assembly, special retractors available for use with mullions
• Mullions: Removable mullions are available for pairs of doors

• Hand: Field reversible, non-handed
• Finishes: US28, DC13.
• Strikes: PB48 top
• Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch, ES - electric strike top latch (optional). Device needs to be less bottom rod (LBR).
• Dogging Feature: Hex key dogging standard, except EL where must use hold back feature
• Cylinder: Rim, key entry (NL) or hold back (HB) feature available. Field selectable. Please contact us for cylinder options.
• Sizes: 30", 42",
• Doors: 1 3/4" thick metal doors, specify if other
• Projections: 3 3/8" in neutral position, 2 3/8" in dogged position. Pushbar height is 2 1/2.
• Stile: 1 3/4" minimum
• Electric Functions: EL - electric latch retraction, ED - electric dogging (both EL and ED require PS873-2 minimum power supply). RX - request to exit switch, monitors pushpad SPTD switch.
• Fasteners: All machine screw mounting. Device mounting fasteners are concealed, latch fasteners are exposed to egress side.
• End Caps: Black powder-coated metal end caps
• Vertical Rods: 7' standard, extension rods available up to 10'. Rod extension kits available.
• ANSI: Certified ANSI A156.3 Grade 1 standards

• Hand: Non handed
• Finishes: US28, DC13. Centercase and end cap are powder-coated black only.
• Strikes: TD35 strike supplied standard
• Latchbolt: 1" thickness, 3/4" throw
• Dogging Feature: Hex Key Dogging standard, except EL where must use hold back feature
• Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable)Please Contact Us If You Would Like The Cylinder Option.
• Sizes: 36", 42"
• Doors: 1 3/4" thick metal or wood, specify if wood door
• Projections: 3 3/8" in neutral position, 2 3/8" in dogged position. Pushbar height is 2 1/2".
• Stile: 1 3/4" minimum
• Electric Functions: EL - electric latch retraction, ED - electric dogging (both EL and ED require PS873-2 minimum power supply). RX - request to exit switch, monitors pushpad SPTD switch.
• Fasteners: All machine screw mounting. Device mounting fasteners are concealed, latch fasteners are exposed to egress side.
• End Caps: Black powder-coated metal end caps
• ANSI: Carry UL label and approved for life safety. Certified ANSI A156.3 Grade 1 standards.
• Mullions: Removable mullions are available for pairs of doors

Falcon 1990 EO Concealed Vertical Rod Cross Bar Exit Device.

The 20 series is a light-to-medium duty, Grade 1 exit device.

Specifications

• Hand: Specify RHR or LHR, not reversible
• Finishes: P28, P13. 
• Strikes: SD36 standard
• Latchbolt: 1/2" throw hardened steel
• Dogging Feature: Hex dogging standard
• Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Please Contact Us For More Cylinder Options.
• Sizes: Field adjustable width, 41" crossbar standard, fits 3' 8" door width, extra length crossbars available
• Doors: 1 3/4" thick metal or wood doors, specify if wood door
• Projections: 4 3/8" extended, 2 1/2" depressed
• Stile: 1 3/4" minimum
• Fasteners: All mounting screws are concealed
• ANSI: Certified ANSI A156.3 Grade 1 standards
• Mullions: Removable mullions are available for pairs of doors

Falcon 24-Vertical EO Rod Exit Device. Panic exit hardware High-traffic applications demand the added strength and protection that comes with a vertical rod device. The Falcon 24-V Series delivers with a surface-applied design that includes standard top latch and deadlocking. The narrow stile and sleek touch bar design ensure an attractive installation.

Hand: Field reversible

Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626); US32 (629); US32D (630); US28 (628), 313AN. Contact Us For Finishes Not In The Finish Options At 212-677-7530.

Strikes: 3788 top strike is surface applied, 2130 bottom strike is mortised into floor.

Angle Bracket: Use 4215 angle bracket in flush transom installations. Allow use of standard 3788 strike.

Latchbolt: Top stainless steel, top latch 3⁄4" throw, bottom bolt 1 ⁄2" throw.

Deadlocking latchbolt: Standard with top latch

Latch retention hold: Standard with top latch. On top latch.

Dogging feature: Half turn hex dogging standard. No threaded parts to wear out.

Doors: 1 3⁄4" thick, wood or metal. Specify thickness if other than 1 3⁄4" thick.

Projections: 2 3⁄4" maximum, 2" dogged.

Stile: 1 3⁄4” minimum when used in pairs.

Fasteners: All mounting screws are concealed, sheet metal screws standard, machine screws available, specify AMS.

Sex bolts: Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors. For EO device, specify 8 - 425 (#10-24) SNB and 2 - 325 (1 ⁄4"-20) SNB. For devices with trim, specify 8 - 425 (#10-24) SNB.

ANSI: Certified ANSI A156.3-2001 grade 1 standards

Vertical rods: Furnished to length based on a 40" horizontal CL from finished floor and a 7'0" door standard. Variations from these standards must be specified when ordering.

Adjustable Features

• Hold-open time delay
• Backcheck position
• Backcheck speed
• Opening/closing speed

Product Highlights

• Aluminum powder coated steel cover makes the Falcon Operator aesthetic for any application.
• One piece mounting bracket eliminates the need for end caps to reduce parts and installation time.
• Intelligent control box provides the most precise door operation and includes adjustable features for all commercial applications.
• Non-handed motor gearbox uses mechanical controls and acts as size 3 closer in manual use.
• Mounting bracket contains fastening notches to reduce parts and allow for faster and easier installation.

Specifications

• Header length - 26"
• Mounting - Surface Mount
• Handing - Non-handed
• Cycle Tested - 1 million gear box

Adjustable Features

• Hold-open time delay
• Backcheck position
• Backcheck speed
• Opening/closing speed

Product Highlights

• Aluminum powder coated steel cover makes the Falcon Operator aesthetic for any application.
• One piece mounting bracket eliminates the need for end caps to reduce parts and installation time.
• Intelligent control box provides the most precise door operation and includes adjustable features for all commercial applications.
• Non-handed motor gearbox uses mechanical controls and acts as size 3 closer in manual use.
• Mounting bracket contains fastening notches to reduce parts and allow for faster and easier installation.

Specifications

• Header length - 26"
• Mounting - Surface Mount
• Handing - Non-handed
• Cycle Tested - 1 million gear box

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL Listed 3-hour, A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
• Roses shall be 3-1/2” diameter.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL Listed 3-hour, A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
• Roses shall be 3-1/2” diameter.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL Listed 3-hour, A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
• Roses shall be 3-1/2” diameter.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL Listed 3-hour, A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
• Roses shall be 3-1/2” diameter.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.