Corbin Russwin ED5800 & ED5800A Fire Concealed Vertical Rod Exit Device 630 finish

Handing: Device is handed but easily field reversible. Lever trim is handed.

Bar length: Easily field cut to size. Standard: 36" (914mm) bar fits 30"- 36" (762mm-914mm) door.

Finish: 630-Satin Stainless Steel

ED5800 & ED5800A Catalog

Door Thickness: 1-3/4" (44mm) standard

Stile: Minimum width 4-1/2" (114mm).

Door Height: Standard: top rod for 8' door.

Latchbolt: Top: 3/4" (19mm) throw, stainless steel pullman-type with automatic deadlatching. Bottom: 5/8" (16mm) throw deadbolt, held retracted during door swing.

Vertical Rods: 1/2" O.D. tubing, electroplated for corrosion resistance.

Materials: Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated for corrosion resistance; finished parts are brass, bronze or stainless steel; stainless steel springs; nylon bearings.

Projection: 3-1/4" (83mm) active

Dogging: Standard on panic devices; single-point 1/4 turn hex key dogging.

Fasteners: Standard on panic devices: machine screws. Standard on fire-rated devices: sex nuts and bolts.

Strike: Top: roller type. Bottom: flush mounted.

Applications and Listings: For use on metal doors only

Warranty: Five-year limited.

Certification/Compliance ANSI Meets A156.3, Type 8, Grade 1. Meets A117.1 Accessibility Code. UL/cUL All devices listed for safety as panic hardware; devices comply with UL 305 standards for panic hardware. Three-hour fire-rated devices listed as fire exit hardware for A label and lesser class 8' x 8' double doors; UL symbol on active case cover indicates listing. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. California State Reference Code This product has been approved by the California State Fire Marshal pursuant to section 13144.1 of the California Health and Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. All fire-rated devices comply with NFPA 80 Fire Doors and Windows. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act.

Corbin Russwin ED8400 Surface Verticle Rod Exit Device

Handing: Handed; specify hand.

Finish:

689-Aluminum Painted

691-Light Bronze Painted

Instructions

ED 8400 Catalog

Bar Length: Easily field cut to size.

Standard: 36" bar fits 31"- 36" (787mm-914mm) door.

Optional: 30" bar fits 28" - 30" (711mm-762mm) door; .

Optional: 42" bar fits 37" - 42" (940mm-1067mm) door; .

Optional: 48" bar fits 43" - 48" (1092mm-1219mm) door; 

Door Thickness: 1-3/4" (44mm) standard.

Backset: 2-3/4" (70mm). Device and trim cover standard

Door Height: All top rods easily field cut to size. Standard on ED8400 devices: top rod for 7'6" door.

Latchbolts ED8400 devices: Top: 1/2" interlocking drop latch. Bottom: 5/8" pivoted.

Materials: Heavy-duty wrought steel chassis and pushpad; steel vertical rods; aluminum bar and latch covers; stainless steel springs; nylon bearings.

Dogging: Standard on ED8400 devices: single point 1/4 turn dogging.

Fasteners: Standard on ED8400 devices: machine screws and wood door fasteners.

Warranty: One-year limited.

Certification/Compliance ANSI Meets A156.3, Type 2, Grade 1. C-UL US All devices listed for safety as panic hardware; devices comply with UL 305 standards for panic hardware. UL symbol on rear cover label indicates listing. Threehour fire-rated devices listed as fire exit hardware for A label and lesser class 8' x 8' double doors; UL symbol on rear cover label indicates listing. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. California State Reference Code This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. All fire-rated devices comply with NFPA 80 Fire Doors and Windows. ADA Lever trims and pulls comply with Americans with Disabilities Act.

Corbin Russwin ED8400A Fire Rated Surface Verticle Rod Exit Device

Handing: Handed; specify hand.

Finish:

689-Aluminum Painted

691-Light Bronze Painted

Instructions

ED 8400 Catalog

Bar Length: Easily field cut to size.

Standard: 36" bar fits 31"- 36" (787mm-914mm) door.

Door Thickness: 1-3/4" (44mm) standard.

Backset: 2-3/4" (70mm). Device and trim cover standard

Door Height: All top rods easily field cut to size. Standard on ED8400 devices: top rod for 7'6" door.

Latchbolts ED8400 devices: Top: 1/2" interlocking drop latch. Bottom: 5/8" pivoted.

Materials: Heavy-duty wrought steel chassis and pushpad; steel vertical rods; aluminum bar and latch covers; stainless steel springs; nylon bearings.

Dogging: Standard on ED8400 devices: single point 1/4 turn dogging.

Fasteners: Standard on ED8400 devices: machine screws and wood door fasteners.

Warranty: One-year limited.

Certification/Compliance ANSI Meets A156.3, Type 2, Grade 1. C-UL US All devices listed for safety as panic hardware; devices comply with UL 305 standards for panic hardware. UL symbol on rear cover label indicates listing. Threehour fire-rated devices listed as fire exit hardware for A label and lesser class 8' x 8' double doors; UL symbol on rear cover label indicates listing. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. California State Reference Code This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. All fire-rated devices comply with NFPA 80 Fire Doors and Windows. ADA Lever trims and pulls comply with Americans with Disabilities Act.

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Overview
Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

Handing: Device is handed but easily field reversible.

ED4800 Catalog

Finish:

630-Satin Stainless Steel

613-Oil Rubbed Bronze

Bar Length: Easily field cut to size. Standard: 36" (914mm) bar fits 30"- 36" (762mm-914mm) door

Door Thickness: 1-3/4" (44mm) standard.

Stile: Minimum width 2" (51mm).

Door Height: Standard: Top rod for 8' door. Telescoping rod assembly to accommodate various door heights..

Latchbolt: Top: 3/4" (19mm) throw, pullman type with automatic deadlatching. Bottom: 5/8" (16mm) throw deadbolt, held retracted during door swing

Vertical Rods: 1/2" O.D. tubular brass, bronze or stainless steel with rod guides

Materials: Heavy-duty cold-forged steel chassis; heavy-gauge steel mechanisms, electroplated for corrosion resistance; finished parts are brass, bronze or stainless steel; stainless steel springs; nylon bearings.

Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged.

Dogging: Standard: single point 1/4 turn hex key dogging.

Fasteners: Standard: machine screws.

Strike: Top: Adjustable roller strike with positive locking plate and shims. Bottom: flush mounted.

Warranty: Five-year limited.

Certification/Compliance ANSI Meets A156.3, Type 6, Grade 1. Meets A117.1 Accessibility Code. UL/cUL All devices listed for safety as panic hardware; devices comply with UL 305. UL symbol on active case cover indicates listing. California State Reference Code This product has been approved by the California State Fire Marshal pursuant to section 13144.1 of the California Health and Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act.