Arrow BM26 Privacy Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM26 Privacy Mortise Lever Lock:

• Latchbolt by knob/lever either side, except when outside is locked by turnpiece inside.
• Operating inside knob/lever, closing door, or with outside emergency release unlocks outside.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM27 Institutional Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM27 Institutional Mortise Lever Lock:

• Latchbolt by knob/lever either side, except when Privacy outside is locked by turnpiece inside.
• Operating inside knob/lever or closing door unlocks outside.
• Key outside retracts latch at all times, even if thumbturn is held in locked position.
• Auxiliary latch deadlocks latchbolt.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM31 Storeroom Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM31 Storeroom Mortise Lever Lock:

• Latchbolt operated by knob/lever either side.
• Deadbolt is operated by key from either side.
• When deadbolt is projected, key either side will retract deadbolt, then latchbolt.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM32 Vestibule Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM32 Vestibule Mortise Lever Lock:

• Latchbolt operated by knob/lever either side, except when outside knob/lever is locked by key from the inside cylinder.
• When outside knob/lever is locked, latchbolt is retracted by key outside or by knob/lever inside.
• Auxiliary latchbolt deadlocks latchbolt

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM33 Storeroom Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM33 Storeroom Mortise Lever Lock:

• Both knobs/levers rigid at all times.
• Auxiliary latchbolt deadlocks latchbolt.
• Latchbolt operated only by key from either side.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM34 Storeroom Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM34 Storeroom Mortise Lever Lock:

• Latchbolt operated by knob/lever either side except when the outside knob/lever is locked by stop works in lock front then operated by key outside or by knob/lever inside.
• Deadbolt operated by key from either side.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

Arrow BM37 Classroom Mortise Lever Lock. Arrow BM Series Lever Mortise Locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and  performance, and precisely manufactured to exacting standards.

Arrow BM37 Classroom Mortise Lever Lock:

• Latchbolt by knob/lever either side.
• Except when outside is locked from inside or outside by key.
• When outside is locked, latchbolt is retracted by key from inside or outside or by operating inside knob/lever.
• Auxiliary latch deadlocks latchbolt.

Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case.

• Door Thickness – 1-3/4" (4mm) standard.
• Backset – 2-3/4" (70mm).
• Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
• Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).
• Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front.
• Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
• Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking.
• Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw.
• Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm).
• Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm)

• Finishes: 26D, 10B, 04, 03.

• Lever Trims: BRL, HSL, BRH, HSH, JL, VL, XL, JH, VH, XH.

Certification/Compliance:

ANSI Meets A156.13 Series 1000, Operational Grade 1.

Federal Meets FF-H-106C, Series 86 and 87.

UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face.

Advantages: • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. * Note: Not all trim designs available in all finishes.

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to meet the rigors of high-traffic, abusive environments. Constructed of heavy-gauge steel with unique, patented features and a full range of functions including status indicators and trim, the versatility and reliability of this lock complement any application.

Corbin Russwin’s status indicator options offer a unique and highly visible window design and provides clarity on the locked/unlocked status of a door. Available for use with a wide range of trim options and with a variety of functions, the mortise lock status indicators are versatile for any application.

Features
Direct drive performance for consistent torque and force during lever rotation

Lever return is crisp and firm – eliminating lever sag

Available in 63 mechanical and electrified functions, including 2 vandal resistant and 4 behavioral health options, 61 standard and Muséo Line decorative lever designs and 16 finishes

Integrates with new or existing Corbin Russwin key systems, including patented/high security Access 3® and Pyramid

Integrates with access control platforms

Utilizes EcoFlex®️ technology on all electromechanical functions, creating up to 89% energy savings

Occupancy indicators available

Ten-year warranty

Benefits
Innovative Design: Optimized torsion spring design and fewer moving parts give the lock extremely smooth and consistent operations

Flexible: Field reversible latchbolt makes it easy to re-hand without disassembling the lock case

Safe and Secure: Withstands intrusion attempts and abuse, featuring specialized security trim and components

Lower Total Cost of Ownership: Far exceeds ANSI/BHMA Grade 1 requirements ensuring durability and longevity

Sustainable: Environmental product declaration (EPD) in accordance with ISO14025

Specifications
ANSI/BHMA Code: A156.13
ANSI/BHMA Series: Series 1000
Backset Depth (Standard): 2 3/4"
Cylinder Format: Conventional, Large Format, Small Format
Cylinder Pins: 6 pin, 7 pin
Door Thickness (Standard): 1 3/4"
Door Type: Bullet-Resistant Doors, Wood, Hollow Metal
Handing: Field Reversible
Latchbolt Throw: 3/4"
Maximum Backset: 2 3/4"
Maximum Door Thickness: 4"
Minimum Backset: 2 3/8"
Minimum Door Thickness: 1 3/8"
Number of Keys: 2
Strike Type (Standard): ANSI Straight Lip
UL Listed: Yes
ULC Listed: Yes
Warranty: 10-year limited warranty
Certifications
ASTM E330 Certified

Environmental Product Declaration (EPD)

CAL FIRE, 3775-1305:0130

UL listed and UL10c compliant

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

UL-cUL Listed for use on fire doors having a rating up to and including 3-hours

Florida Building Code Windstorm Certified

ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1

Dorma M9010 Passage/Closet Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9010 Passage/Closet Mortise Lever Lock:

• Latch bolt operated by trim either side.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9040 Privacy, Bedroom or Bath
Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9040 Privacy, Bedroom or Bath
Mortise Lever Lock:

• Latch bolt operated by trim either side, except when outside trim locked by inside turn. .
• When locked, outside trim unlocked by inside trim, by closing door, by rotating inside turn, or by emergency release.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9050 Office/Entry Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9050 Office/Entry Mortise Lever Lock:

• .Latch bolt operated by trim either side, except when outside trim locked by stopworks. .
• When outside trim locked, latch bolt retracted by key outside or operated by inside trim. .
• Auxiliary latch deadlocks latch bolt.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9070 Classroom Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9070 Classroom Mortise Lever Lock:

• Latch bolt operated by trim either side, except when outside trim locked by key outside.
• When outside trim locked, latch bolt operated by inside trim
• Auxiliary latch deadlocks latch bolt.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9080 Storeroom Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9080 Storeroom Mortise Lever Lock:

• Latch bolt retracted by key outside or operated by inside trim
• Outside trim always rigid
• Auxiliary latch deadlocks latch bolt.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9953 Entry with Dead Bolt Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9953 Entry with Dead Bolt Mortise Lever Lock:

• Latch bolt operated by trim either side, except when outside locked by stopworks
• Dead bolt operated by key outside or turn inside
• Key operates both dead bolt and latch bolt
• Inside lever operates both bolts; outside trim remains locked
• Latch bolt deadlocked when outside lever locked, or dead bolt projected
• When dead bolt retracted, outside trim unlocked by stopworks.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Dorma M9956 Corridor with Dead Bolt Mortise Lever Lock. In Stock With Free Shipping On All Orders Over $189. Dorma M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavy-duty mortise chassis for all applications where ANSI A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of standard and custom levers or knob design.

Dorma M9956 Corridor with Dead Bolt Mortise Lever Lock:

• Latch bolt operated by trim either side, except when projected dead bolt locks outside trim and deadlocks latch
• Dead bolt and latch retracted by key outside
• Dead bolt projected by turn inside or key outside
• Inside trim operates both bolts and unlocks outside trim.

Exceptional security, enhanced aesthetics, and rugged dependability. These premium performance locksets are built with a heavyduty mortise chassis for all applications where ANSI/BHMA A156.13 Grade 1 products are required. To meet the aesthetic needs of your project, these versatile locks are available in a range of lever and knob trim designs.

Features

• .M9000 Series mortise locks feature advanced design concepts for extreme reliability and are manufactured with the finest materials for exceptional durability.
•  M9000 locks provide a wide variety of functions and the most popular finishes. .
• Special, high-strength springs and a positive stop eliminate unsightly sagging levers. .
• Select components are manufactured with highstrength steel or stainless steel, providing an extremely strong, highly durable lock.

• .Trims utilize 5/16" (8 mm) high-strength alloy steel spindles for extra durability. .
• Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel. .
• All levers—solid cast/forged brass or stainless. .
• All roses—wrought brass or stainless. .
• Escutcheons— H: cast/forged brass or stainless. M: wrought brass or stainless.

Recommended Applications .

• Schools and Universities .
• Hotels .
• Apartments .
• Hospitals and Nursing Homes .
• Churches .
• Municipal Buildings .
• Airports .
• Retail Complexes .
• Offices .
• Warehouses 

M9000

Sargent 7804 Storeroom or Closet Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7804 Storeroom or Closet Mortise Knob:

• Key outside retracts latchbolt

• Trim outside locked at all times

• Trim inside always retracts latchbolt

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F07

Finishes: 26D       

Sargent 7805 Office or Entry Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7805 Office or Entry Mortise Knob:

• Key outside retracts latchbolt, also locks & unlocks outside trim

• Trim inside always retracts latchbolt, trim outside remains locked

• Thumbturn inside locks & unlocks outside trim

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F04

Finishes: 26D       

Sargent 7815 Passage or Closet Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7815 Passage or Closet Mortise Knob:

• Trim from either side retracts latchbolt at all times

• ANSI F01

Finishes: 26D-Satin Chrome   

Sargent 7817 Asylum or Institutional Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7817 Asylum or Institutional Mortise Knob:

• Key from either side retracts latchbolt

• Trim on both sides are locked at all times

• Auxiliary deadlatch

• ANSI F30

Finishes: 26D-Satin Chrome   

Sargent 7837 Classroom Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7837 Classroom Mortise Knob:

• Key outside retracts latchbolt, also locks & unlocks outside trim

• Trim inside always retracts latchbolt

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F05

Finishes: 26D-Satin Chrome   

Sargent 7838 Classroom Security Intruder Latchbolt Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7838 Classroom Security Intruder Latchbolt Mortise Knob:

• Key from either side locks & unlocks outside trim

• Key from either side retracts latchbolt

• Trim outside retracts latchbolt, except when locked

• Trim inside always retracts latchbolt

• A Multi-Function 8200/R8200/7800 Lockbody

• Auxiliary deadlatch

• ANSI F32

Finishes: 26D-Satin Chrome   

Sargent 7855 Office or Entry Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7855 Office or Entry Mortise Knob:

• Key outside retracts latchbolt, also locks & unlocks outside trim

• Trim inside always retracts latchbolt

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F05

Finishes: 26D-Satin Chrome   

Sargent 7865 Privacy Bath/Bedroom Mortise Knob. In Stock With Free Shipping On Orders Over $189. Sargent 7800 Series Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997). SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 7865 Privacy Bath/Bedroom Mortise Knob:

• Trim outside retracts latchbolt except when locked by thumbturn

• Trim inside retracts latchbolt and unlocks outside trim

• Emergency Release locks/unlocks trim outside-by coin, screwdriver or Emergency key (14-0057) ordered separately

• Thumbturn locks and unlocks trim outside

• Closing the door will unlock outside trim

• ANSI F22

Finishes: 26D-Satin Chrome   

Sargent 8204 Storeroom or Closet Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8204 Storeroom or Closet Mortise Lever:

 • Key outside retracts latchbolt

• Trim outside locked at all times

• Trim inside always retracts latchbolt

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F07

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8205 Office or Entry Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8205 Office or Entry Mortise Lever:

• Key outside retracts latchbolt, also locks & unlocks outside trim

• Trim inside always retracts latchbolt, trim outside remains locked

• Thumbturn inside locks & unlocks outside trim

• Auxiliary deadlatch • A Multi-Function 8200/R8200/7800 Lockbody

• ANSI F04

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8206 Storeroom or Service Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8206 Storeroom or Service Mortise Lever:

• No trim outside, cylinder only

• Key outside retracts latchbolt

• Trim inside always retracts latchbolt

• Auxiliary deadlatch

• A Multi-Function 8200/R8200/7800 Lockbody

• Same as 04 Function without trim outside

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8213 Exit Latch Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8213 Exit Latch Mortise Lever:

• No outside trim or cylinder

• Trim inside retracts latchbolt

• A Multi-Function 8200/R8200/7800 Lockbody

• Auxiliary deadlatch

• ANSI F31

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8215 Passage or Closet Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8215 Passage or Closet Mortise Lever:

• Trim from either side retracts latchbolt at all times

• ANSI F01

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8217 Asylum or Institutional Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8217 Asylum or Institutional Mortise Lever:

• Key from either side retracts latchbolt

• Trim on both sides are locked at all times

• Auxiliary deadlatch

• ANSI F30

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8224 Room Door Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8224 Room Door Mortise Lever:

• Key outside or thumbturn inside retracts and projects deadbolt

• Trim either side retracts latchbolt

• Latchbolt & deadbolt operate independently of each other

• ANSI F21

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8225 Dormitory or Exit Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8225 Dormitory or Exit Mortise Lever:

• Key outside or thumbturn inside retracts and projects deadbolt

• Trim from either side retracts latchbolt, when the deadbolt is in the retracted position

• Trim outside is locked, when the deadbolt is projected

• When deadbolt is projected, Trim inside retracts latchbolt and deadbolt simultaneously, unlocking outside trim

• ANSI F13

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8226 Store Door Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8226 Store Door Mortise Lever:

• Key from either side retracts & projects deadbolt

• Trim from either side retracts latchbolt

• Latchbolt and deadbolt are independent of each other

• ANSI F14

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8227 Closet or Storeroom Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8227 Closet or Storeroom Mortise Lever:

• Key outside or thumbturn inside retracts and projects deadbolt

• Trim from either side retracts latchbolt, when the deadbolt is in the retracted position

• Trim outside is locked, when the deadbolt is projected

• When deadbolt is projected, Trim inside retracts latchbolt and deadbolt simultaneously, unlocking outside trim

• ANSI F13

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8235 Storeroom Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8235 Storeroom Mortise Lever:

• Key outside retracts and projects deadbolt

• Trim outside retracts latchbolt, except when deadbolt is projected

• No inside trim or cylinder

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case

Sargent 8236 Closet Mortise Lever Lock. The Strongest Lock Around.

When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Sargent 8236 Closet Mortise Lever:

• Key locks and unlocks trim

• No inside trim or cylinder

• A Multi-Function 8200/R8200/7800 Lockbody

• Auxiliary dead latch

Maxiumum Flexibility

• Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
• available with push/pull trim, perfect for hospital applications

Finishes: 26D, 03, 04, 26, 10, 10B.

Strength & Security

• Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for deadbolt x latchbolt (Level 1) and latchbolt(Level 3) components
• Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
• Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
• Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
• Through-bolted lever trim for increased security
• Torx^® and spanner screws
• Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

• ANSI/BHMA certified
• Meets A117.1 Accessibility Code
• UL and UL listed to Canadian safety standards                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
• California State Reference Code

Multi-Functionality

• Complete line of lockbodies offering 58 functions, 4 electrical functions
• 8 functions accomplished with one lockbody
• Functions easily changed without opening the lockcase
• Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install

• Easy operation. Only 30º of lever rotation required to retract latchbolt
• Lever springs contained inside of the lock case
• Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%
• Lock is easily re-handed without removing parts or opening case