Filters

Seco-Larm EV-N1506-2W4WQ Bullet Camera

IP 5MP 2.8mm Bullet Camera

The ENFORCER Fixed Bullet Camera offers high-resolution video and advanced technology in a compact and accessible package. The camera features H.265 video compression, reducing bandwidth and storage requirements without giving up video quality. With True Wide Dynamic Range (WDR), Digital Noise Reduction (3DNR) and Day/Night (ICR) capabilities, the camera provides excellent picture quality.

Latest Firmware version: V31.35.8.2.3.5_231010_2
Click here to download the latest firmware

  • 1/2.7″ 5MP SmartSens CMOS Sensor
  • 30FPS@5MP, 1620p (2880×1620)
  • 2.8mm Lens
  • Triple Stream Encoding: H.265, H.264 and MJPEG
  • True Wide Dynamic Range (WDR)
  • Digital Noise Reduction (3DNR)
  • True Day & Night Function with ICR Module
  • ICR Sensitivity adjustment
  • Corridor mode
  • Operating temperature: -40°~131° F (-40°~55° C)
  • IP66 Weatherproof
  • IR Range 98′ (30m)
  • Smart IRs adjust IR strength to conditions
  • MicroSD slot (512GB max)
  • PoE (IEEE 802.3af), 12VDC
  • ONVIF® profiles G, S, and T conformant
  • Junction box is not included with the product

AI Functions

  • License plate detection
  • License plate recognition
  • Face detection
  • Human & vehicle detection
  • Perimeter intrusion detection
  • Line crossing detection
  • Stationary object detection
  • Cross counting
  • Heat map
  • Crowd density detection
  • Queue length detection

Camera 

Image sensor 1/2.7″ 5MP SmartSens CMOS sensor
Effective pixels 2880(H)x1620(V)
Scanning system Progressive scan
Electronic shutter speed Auto, manual; 1/5 s to 1/20,000 s
Minimum illumination Color: 0.1Lux at F1.2 (AGC on) 0Lux with IR on
IR Distance Distance up to 98′ (30m)
IR On/Off control 2pcs (850nm) LEDs
IR LEDs 2x850nm LEDs

Lens

Lens type Fixed
Focal length 2.8mm
Maximum aperture F1.6
Field of view Horizontal: 110°, Vertical: 58°, Diagonal:133°
Video
Compression H.265, H.264
Streaming capability Triple (3) streams
Resolution 2880×1620, 2560×1440, 2304×1296, 1080p (1920×1080), 720p (1280×720)
Bit rate control CBR/VBR
Bit rate Main stream: 256 to 8192 Kbps, Sub stream: 128 to 4096 Kbps,
Mobile stream: 8 to 1536 Kbps
Backlight Disable (default) BLC, HLC, True WDR
White balance Auto
Gain control Auto
Noise reduction 3DNR
Smart IR Support
Image rotation 0″, 180″
Mirror Disable, vertical, horizontal, all
Privacy masking Off, on (4 areas, rectangle)
Region of interest Support

Network

Ethernet RJ45
Protocol TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP
Interoperability ONVIF® profiles G, S, and T conformant
Auto register Support
Streaming method Multicast
Max. user access 7
Web viewer IE, Chrome, Firefox, Edge
On-board storage Built in memory slot Supports up to 512GB MicroSD/SDHC/SDXC

Certifications

Certfications CE, FCC, RoHS
ONVIF® Profiles G, S, and T conformant
NDAA Compliant
Electrical
Power supply 12VDC, or PoE (IEEE 802.3af Class 0)
Power consumption < 6W
Environmental
Operating conditions -40°~131° F (-40°~55° C) Less Than 95% RH
Storage conditions -40°~140° F (-40°~60° C)
IP Rating IP66 Weatherproof
Construction
Casting Metal
Dimensions ø2-13/16″x5-15/16″ (ø71×151 mm)
Weight 9.7-oz (275g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm EV-N2506-NW4WQ Turret Camera

IP 5MP Motorized 2.8~12 mm Turret Camera

The ENFORCER Motorized Turret Camera offers high-resolution video and advanced technology in a compact and accessible package. The camera features H.265 video compression, reducing bandwidth and storage requirements without giving up video quality. With True Wide Dynamic Range (WDR), Digital Noise Reduction (3DNR) and Day/Night (ICR) capabilities, the camera provides excellent picture quality.

Latest Firmware version: V31.35.8.2.3.5_231010_2
Click here to download the latest firmware

  • 1/2.7″ 5MP SmartSens CMOS Sensor
  • 30FPS@5MP, 1620p (2880×1620)
  • 2.8~12 mm Lens
  • Triple Stream Encoding: H.265, H.264 and MJPEG
  • True Wide Dynamic Range (WDR)
  • Digital Noise Reduction (3DNR)
  • True Day & Night Function with ICR Module
  • ICR Sensitivity adjustment
  • Corridor mode
  • Operating temperature: -40°~131° F (-40°~55° C)
  • IP66 Weatherproof
  • IR Range 147′ (45m)
  • Smart IRs adjust IR strength to conditions
  • MicroSD slot (512GB max)
  • PoE (IEEE 802.3af), 12VDC
  • ONVIF® profiles G, S, and T conformant
  • Junction box is not included with the product

AI Functions

  • License plate detection
  • License plate recognition
  • Face detection
  • Human & vehicle detection
  • Perimeter intrusion detection
  • Line crossing detection
  • Stationary object detection
  • Cross counting
  • Heat map
  • Crowd density detection
  • Queue length detection

Camera 

Image sensor 1/2.7″ 5MP SmartSens CMOS sensor
Effective pixels 2880(H)x1620(V)
Scanning system Progressive scan
Electronic shutter speed Auto, manual; 1/5 s to 1/20,000 s
Minimum illumination Color: 0.002Lux at F1.2 (AGC on) 3Lux with IR on
IR Distance Distance up to 147′ (45m)
IR On/Off control Auto, manual
IR LEDs 4x850nm LEDs

Lens

Lens type Motorized
Focal length 2.8~12 mm
Maximum aperture F1.8~3.3
Field of view Horizontal: 107°~33.6°, Vertical: 54.7°~18.90°, Diagonal: 133.7°~37.6°
Video
Compression H.265, H.264
Streaming capability Triple (3) streams
Resolution 2880×1620, 2560×1440, 2304×1296, 1080p (1920×1080), 720p (1280×720)
Bit rate control CBR/VBR
Bit rate Main stream: 256 to 8192 Kbps, Sub stream: 128 to 4096 Kbps,
Mobile stream: 8 to 1536 Kbps
Backlight Disable (default) BLC, HLC, True WDR
White balance Auto
Gain control Auto
Noise reduction 3DNR
Smart IR Support
Image rotation 0″, 180″
Mirror Disable, vertical, horizontal, all
Privacy masking Off, on (4 areas, rectangle)
Region of interest Support

Network

Ethernet RJ45
Protocol TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP
Interoperability ONVIF® profiles G, S, and T conformant
Auto register Support
Streaming method Multicast
Max. user access 7
Web viewer IE, Chrome, Firefox, Edge
On-board storage Built in memory slot Supports up to 512GB MicroSD/SDHC/SDXC

Certifications

Certfications CE, FCC, RoHS
ONVIF® Profiles G, S, and T conformant
NDAA Compliant
Electrical
Power supply 12VDC, or PoE (IEEE 802.3af Class 0)
Power consumption < 6W
Environmental
Operating conditions -40°~131° F (-40°~55° C) Less Than 95% RH
Storage conditions -40°~140° F (-40°~60° C)
IP Rating IP66 Weatherproof
Construction
Casting Metal
Dimensions ø5-5/16″x5-1/8″ (ø135×130 mm)
Weight 1-lb 9.6-oz (725g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm EV-Y2501-A2WWQ Turret Camera

HD 5MP 2.8mm Turret Camera

The ENFORCER HD 5MP Fixed Turret Camera offers high-resolution video and advanced technology in a compact and accessible package. With True Wide Dynamic Range (WDR), Digital Noise Reduction (3DNR) and Day/Night (ICR) capabilities, the camera provides excellent picture quality.

  • 1/2.8″ 5MP Sony CMOS Sensor
  • 20FPS@5MP, (2592×1944)
  • 2.8mm Fixed lens
  • TVI, CVI, AHD, CVBS (Analog)
  • True Wide Dynamic Range (WDR)
  • 3D Digital Noise Reduction (3DNR)
  • True Day & Night Function with ICR Module
  • IR Range 98′ (30m)
  • Operating temperature: -40°~131° F (-40°~55° C)
  • Rugged weatherproof construction (IP66)
  • Heavy-duty vandal-resistant design
  • Cables concealed in bracket to prevent tampering
  • 12VDC
  • Junction box is not included with the product

Camera 

Image sensor 1/2.8″ 5MP Sony CMOS sensor
Effective pixels 2592(H)x1944(V)
Formats TVI (Default) / CVI / AHD / Analog (CVBS)
OSD (On-screen display) Yes
S/N ratio 35db
Minimum illumination Color: 0.05Lux at F1.2 (AGC on) 0Lux with IR on
IR Distance Distance up to 98′ (30m)
IR LEDs 2x 850nm LEDs

Lens

Lens type Fixed
Focal length 2.8mm
Maximum aperture F1.6
Field of view 128°
Video
Resolution 2592×1944
WDR Yes
Shutter control Auto
White balance Auto
Gain control Auto
Noise reduction 3DNR
Privacy masking Off, on (4 areas, rectangle)

Certifications

Certfications CE, FCC, RoHS
Electrical
Operating voltage 12VDC
Current Draw IR On: 440mA, IR Off: 80mA
Environmental
Operating conditions -40°~131° F (-40°~55° C)
IP Rating IP66 Weatherproof
Construction
Casting Metal
Dimensions ø3-15/16″x3-9/16″ (ø100×90 mm)
Weight 16.72-oz (474g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

ON-SCREEN DISPLAY MANUAL

COMPARISON CHART

Seco-Larm HL-951R1-SQ RF Receiver

Seco-Larm HL-951R1-SQ RF Receiver

by Seco-Larm
$ 78.75

900MHz HL-Series RF Receiver – 1-Channel

The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter’s ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032).

  • 917MHz Frequency
  • Wide voltage range, 10~24 VAC or 9~48 VDC, for more applications
  • Over 2.028×1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
  • PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
  • Five individually programmable output modes
  • Up to 99 button codes per channel
  • Available with 1 or 2 channels to control 1 or 2 devices
  • Programming by switch, no need to cut jumpers
  • LED Indicates RF reception and programming functions
  • RF Signal strength / site survey test mode to find optimal installation location
  • Compatible with all HL-series transmitters of same frequency

*Actual operating range will vary depending on the installation and operating environment
868MHz CE versions also available

OEM/ODM enquiries welcome
SECO-LARM has a full range of ENFORCER RF transmitters and receivers for applications from access control to perimeter security to home automation and more. We can manufacture products under your brand and with your logo. All products are FCC or CE certified to bring your products to market faster.

Operating frequency 917MHz
Memory capacity 99 transmitter button codes per channel
Operating voltage 10~24 VAC, 9~48 VDC
Operating current – Standby 8mA@12VDC / 5mA@24VDC / 2mA@48VDC (typical)
Operating current – Active 100mA@12VDC / 50mA@24VDC / 25mA@48VDC per channel
Relay output – Type Independent, sequence, access control
Relay output – Modes 1~99 sec momentary (default, 1s), 1~99 min momentary, toggle, latch, follow (validity)
Relay contacts – Number 1
Relay contacts – Rating Form C 10A@14VDC
Digital display 2-Digit, 7-segment LED
Connectors Screw terminals, +, -, with NO/NC/COM per relay
Operating temperature -40°~167° F (-40°~75° C)
Dimensions 3-15/16″x2-1/2″x1-3/16″ (100x63x30 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

BROCHURE

ADVERTISEMENT

Seco-Larm HL-951T1-SQ RF Transmitter

900MHz HL-Series RF Transmitter – 1-Button

The ENFORCER 900MHz HL-series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)* line of sight. The transmitter’s ultra-low power consumption gives you longer battery life with easy to obtain coin-type batteries (CR-2032).

    • 917MHz Frequency
    • Wide voltage range, 10~24 VAC or 9~48 VDC, for more applications
    • Over 2.028×1031 (20.28 nonillion) possible codes to thwart code crackers and potential for duplicate codes
    • PCB antenna – no external antenna to be installed, adjusted, vandalized, or damaged
    • Five individually programmable output modes
    • Up to 99 button codes per channel
    • Available with 1 or 2 channels to control 1 or 2 devices
    • Programming by switch, no need to cut jumpers
    • LED Indicates RF reception and programming functions
    • RF Signal strength / site survey test mode to find optimal installation location
    • Compatible with all HL-series transmitters of same frequency
    • Patented

*Actual operating range will vary depending on the installation and operating environment
868MHz CE versions also available

OEM/ODM enquiries welcome
SECO-LARM has a full range of ENFORCER RF transmitters and receivers for applications from access control to perimeter security to home automation and more. We can manufacture products under your brand and with your logo. All products are FCC or CE certified to bring your products to market faster.

RF Frequency 917MHz
No. of Buttons 1
Channels 1
IP Rating Waterproof IP68
No. of Codes Over 20,280,000,000,000,000,000,000,000,000,000 possible codes
Dimensions 1-5/16″x3-1/16″x1/2″ (34x78x12.6mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

BROCHURE

ADVERTISEMENT

Seco-Larm PC-U1820-PULQ Power Supply

12VDC Switching CCTV Power Supply, 18 Outputs, 20A total

The ENFORCER 12VDC Switching CCTV Power Supply is an efficient solution for powering CCTV installations. Each unit distributes power to multiple CCTV devices and provides short circuit and overheat protection.

  • 100~220 VAC Input*
  • Adjustable output to reduce voltage drop
  • Each output individually protected by a PTC fuse
  • PTC fuses rated 1.6A@11.0~13.8 VDC
  • Power output ON/OFF switch
  • Individual output status LEDs
  • Convenient AC input and DC output status LEDs on cover
  • Heavy-duty steel case with cover
  • Built-in short circuit and overheat protection
  • 3.3ft (1m) Power cord included

*UL listed for 90~120 VAC

Outputs 18
Total supply current 20A
Max. current per output 1.6A
Output fuse PTC
Output voltage 11.0~13.8 VDC (adjustable by trimpot, ±10% (47~63 Hz)
Input voltage 110/220 VAC (50/60 Hz)
LED indicators Cover -Green: AC Input, Red: DC Output PDM -Red: DC Output
Operating humidity 90% (non-condensing)
Operating temperature 32°~104° F (0°~40° C)
Dimensions 10″x10-5/16″x3-1/8″ (254x262x79 mm)
Weight 6-lb 1-oz (2.76kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Bluetooth Access Controller – Proximity Reader

Rethinking Access Control – Streamlined, fully app-based setup using integrated Bluetooth® wireless technology. No codes to remember, intuitive app design for easy, visual programming. Provides convenience and security to the user and administrator. All data is secured on the device without the risks inherent with an internet connection.

  • No Codes to Remember – Intuitive, visual app-based programming and management, 1,000 users, device options, etc.
  • No Cloud, No Internet Exposure – All data secured locally on device, set and monitored by the administrator
  • App-Based Programming – No complicated software to install, no subscription fees
  • More Than Access – Control doors, gates, lighting, machinery, etc.
  • Secure, Integrated Bluetooth – Passcode protected, AES 128
  • Easy Installation – No control panel necessary
  • Output Modes – Timed relock (1~1,800 seconds), continually unlocked or locked, toggle
  • Hold Open – Hold door open with code or app (customizable)
  • User Customization – Individually customizable output mode / time
  • Multiple User Types – Permanent, scheduled, temporary, # of times
  • Authorized User Monitor – Displays total number of users to guard against unauthorized additions
  • User List Export / Import – for archiving, replicating to other devices, or for off-device editing on a computer
  • Two Ways to Unlock or Trigger a Device – Proximity card or app
  • Unlimited Devices – Access/manage unlimited devices with one app
  • Easy Backup/Restore – Off-device storage / restoration / replication
  • Wrong-Code Lockout – Customizable # of wrong codes and time
  • Tamper Alarm Output – Customizable alarm timing and sensitivity
  • Multilingual App Interface – English, Spanish, French, Portuguese, German, Russian, Vietnamese, and Chinese
  • Weatherproof (IP65)
Access modes App / proximity card
Bluetooth radio Bluetooth Low Energy (BLE) 4.2
Users 1,000 users / 1 administrator
Operating voltage 9~25 VDC
Current draw (max.) 80mA@12VDC, 45mA@24VDC
Inputs Egress: N.O. Ground Door sensor: N.C. Ground
Outputs – Relay Solid state, form C, 2.5A@30VDC
Output – Tamper 50mA@30VDC
IP Rating IP65 Weatherproof
Operating temperature -4°~122° F (-20°~50° C)
Dimensions 3-1/8″x4-1/2″x11/16″ (80x114x18 mm)
Weight 6.3-oz (180g)

PRODUCT INFORMATION SHEET (PI) (ENGLISH)

PRODUCT INFORMATION SHEET (PI) (SPANISH)

PRODUCT INFORMATION SHEET (PI) (FRENCH)

BROCHURE

QUICK INSTALLATION / SETUP GUIDE

SL ACCESS™ APP USER MANUAL

SL ACCESS™ OTA FIRMWARE UPDATE GUIDE

ADDITIONAL PRODUCT INFORMATION SHEET

INSTALLATION / ADMINISTRATOR GUIDE

USER INSTRUCTIONS

ENFORCER BLUETOOTH® ACCESS CONTROLLER USER FAQ

ADVERTISEMENT

Seco-Larm PR-K1S1-A Proximity cards
 Proximity cards sold in packs of ten
 For use with all SECO-LARM proximity readers
 Frequency: 125kHz (EM125)
Seco-Larm SA-027HQ 365-Day Annual Timer

365-Day Annual Timer with Two Relay Outputs

The ENFORCER SA-027HQ Annual Timer can be programmed to operate two Form C relays 24 hours a day, for an entire year for various applications including security, access control, lighting, and environmental control. Each relay can be programmed for up to 99 events with each event on a weekly or daily schedule. Block programming allows events to be repeated on consecutive days. Twenty programmable holidays disable the timer for a single day or the same day yearly.

  • Two N.O. or N.C. Form C relays, 10A@14VDC, one egress input per relay
  • Each relay programmable for 99 events, to a total of 198 individual programmable events
  • Each event can be set weekly, daily, or hourly, over the course of a year
  • Passcode protection can be turned ON or OFF
  • Block programming allows events to be repeated on consecutive days
  • First-person-in function interrupts the normal operation of the annual timer
  • Event outputs can be programmed to disable, ON, OFF, shunt, or momentary (1~99 seconds)
  • 20 Programmable holidays
  • Tandem mode allows both relays to operate simultaneously
  • Built-in clock backup capacitor (saves date/time 7-10 days after power loss)
  • Built-in smart backup battery charger for external backup battery (not included)
  • Compensates for leap years and can be set for Standard or Daylight Savings Time.
  • Alphanumeric backlit LCD display for easy programming
  • Exposed terminals for easy installation
Operating Voltage 12~24 VDC/VAC
Number of Relays 2 Form C
Relay Rating 10A@14VDC
Current Draw Active: 60mA@12VDC ±10% (per channel)

 

Standby: 14mA@12VDC ±10%

Number of Programmable Events 99 for each relay, 198 total
Backup  battery type 12VDC (not included)
Number of Programmable Holidays 20
Battery Charging Current Smart charge, 50mA max., when battery is
≥11.5V and ≤12.8V
Security Code 4-digits, numeric, ON/OFF
Dimensions 4-1/8″ x 3″ x 1-5/16″ (105 x 76 x 33 mm)
Weight 5.6-oz (158g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

COMPARISON CHART

MANUAL (PREVIOUS VERSION)

Square Illuminated Pushbutton Request-to-Exit Plate

  • ETL, Conforms to UL Std. 294
  • Large illuminated pushbutton with caption “PUSH TO EXIT
  • Message language can be easily switched between English, Spanish, and French with 3 included interchangeable plates
  • Pushbutton rated 50A@24VAC
  • Includes five colored 12-inch wire leads with easy-to-attach spade lugs for fast installation
  • LED Gives over 50,000 hours of illumination
  • 12~24 VDC: No resistors required
  • Includes stainless-steel single-gang plate
Operating voltage 12~24VDC
Current rating 50A@24VAC
Faceplate Brushed stainless
Destructive attack level Level I
Line security Level I
Endurance level Level I
Standby power Level I
Timer and buzzer output No
LED status indicator No
IP rating IP65
Operating temperature -40°~167° F (-40°~75° C)
Dimensions 4-1/2” x 2-3/4” x 2-3/4” (114x70x70 mm)
Weight 3.7-oz (105g)

PRODUCTION INFORMATION SHEET (PI)

MANUAL

DIAGRAM

Square Illuminated Pushbutton Request-to-Exit Plate with Timer

  • ETL, Conforms to UL Std. 294
  • Large illuminated pushbutton with caption “PUSH TO EXIT
  • Message language can be easily switched between English, Spanish, and French with 3 included interchangeable plates
  • Pushbutton rated 3A@24VDC
  • Includes five colored 12-inch wire leads with easy-to-attach spade lugs for fast installation
  • LED Gives over 50,000 hours of illumination
  • 12~24 VDC: No resistors required
  • Includes stainless-steel single-gang plate
  • Timed output adjustable from 1~180 seconds
  • Buzzer output for audible status
Operating voltage 12~24VDC
Current rating 3A@24VAC
Faceplate Brushed stainless
Destructive attack level Level I
Line security Level I
Endurance level Level I
Standby power Level I
Timer and buzzer output Yes (1-180s)
LED status indicator No
IP rating N/A
Operating temperature -40°~167° F (-40°~75° C)
Dimensions 4-1/2” x 2-3/4” x 2-3/4” (114x70x70 mm)
Weight 4.7-oz (133g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm SD-961A-36 Push-to-Exit Bar
  • New end caps come off and go on in seconds
  • Designed to allow egress from inside an area normally locked by an electric lock or electromagnetic lock, and/or to disarm (shunt) or trigger an alarm when the door is opened
  • Rugged, heavy-duty construction
  • Pushing the bar at any point sends a signal to release the lock and/or sound an alarm
  • For 36 inch doors (actual length is 34.5 inches)
  • Includes 2 built-in non-latching (momentary), dual-contact switches (NO/COM/NC), rated 25A@24VAC
  • Attractive brushed-aluminum bar with black base and trim
  • Includes SECO-LARM SD-969-A18Q Armored Door Cord, and mounting hardware (for mounting in wood or metal doors)
  • Designed for easy cutting in field to match width of non-standard-sized doors
Circuit Type 2 Built-in momentary dual contact NO or NC contacts
Contact Rating 25A@24VAC
Door Size For 36” doors (actual size: 34-1/2”)
Dimensions 34-1/2”x2-3/4”x2-13/32” (876x70x61 mm)
Weight 7-lb (3kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Illuminated Push-to-Open Bar

The ENFORCER Illuminated Push-to-Open Bar works with an external electric strike or maglock to provide egress from a protected area. It can work in stand-alone mode or as part of an access control system, but also can be locked open by key. Buzzer, output timing, and LED function and colors are also customizable.

  • Provides convenient on-door egress
  • LED makes it easy to see the status
  • Can be stand-alone or connected to an access control system
  • Dogging – standard dogging with hex key
  • For 36″ doors – actual length: 337/16” (85cm)
  • Can be cut to fit smaller doors, minimum 235/8” (60cm)
  • Two built-in non-latching (momentary), dual-contact switches (NO/NC/COM) rated at ≤5A@230VAC, adjustable 0.5~60 sec
  • Large LED shows red in standby and green when triggered, but is programmable red/green/blue by an access control panel
  • Blinking LED and buzzer programmable for relock warning
  • Built-in buzzer indicates unlocked (selectable, up to 92dB)
Operating voltage 12~24 VDC
Power consumption 180mA@12VDC, 140mA@24VDC (max.)
Contact load ≤5A@230VAC
Outputs NO/NC/COM x2
Trigger duration 0.5~60 seconds (adjustable) or dogged open
Buzzer Up to 92dB (adjustable)
LED Indicators – Colors Stand-alone red/green, Controlled red/green/blue
LED Indicators – Size 8-1/4″x1″ (210×25 mm)
Door width 36″ (91.4cm), minimum 23-5/8″ (60cm)
Door Size 32°~150° F (0°~70° C)
Dimensions 33-7/16″x2-3/8″x2-3/8″ (850x61x61 mm)
Weight 4-lb 10-oz (2.1kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Mechanical Push Bar, Black

ENFORCER Electromechanical Push Bars feature a double-locking spindle for stronger and more secure locking. All models include a cylinder lock for keyed entry and some models offer solenoid-actuation to allow unlocking and relocking by an access control device.

  • Double-locking spindle (stronger and more secure)
  • Aluminum alloy construction, reversible, non-handed
  • Fail-secure operation (but can be opened from inside by pressing the bar)
  • Lock status monitoring for indicating status
  • Mortise lock cylinder and keys included to release the lock from the outside
  • Dogging latch on push bar to hold open
  • Includes all needed hardware for typical installations
Housing Anodized aluminum
For doors 36″ (91.5cm), min. 327/8″ (83.5cm), wood or metal
Relay rating Form C, 5A@125VAC
Mode Fail-secure
Dimensions 2 7/16″x2 9/16″x35 1/16″ (61.5x65x890 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Solenoid-Actuated Push Bar, Black

ENFORCER Electromechanical Push Bars feature a double-locking spindle for stronger and more secure locking. All models include a cylinder lock for keyed entry and some models offer solenoid-actuation to allow unlocking and relocking by an access control device.

  • Double-locking spindle (stronger and more secure)
  • Aluminum alloy construction, reversible, non-handed
  • Fail-secure operation (but can be opened from inside by pressing the bar)
  • Lock status monitoring for indicating status
  • Mortise lock cylinder and keys included to release the lock from the outside
  • Dogging latch on push bar to hold open
  • Includes all needed hardware for typical installations
  • Solenoid-actuation allows unlocking and relocking by an access device
  • Solenoid is rated for both continuous and intermittent operation
Operating voltage 12~24 VDC/VAC
Current draw 1.5A (0.5A after 3s)
Endurance Over 500,000 cycles
Housing Anodized aluminum
For doors 36″ (91.5cm), min. 327/8″ (83.5cm), wood or metal
Relay rating Form C, 5A@125VAC
Mode Fail-secure
Dimensions 2 7/16″x2 9/16″x35 1/16″ (61.5x65x890 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm SD-962AR-36A / SD-962BR-36A Exit Device

Rim-Type Exit Device for Exit Doors, Push-to-Exit Bar

The ENFORCER SD-962AR-36A Rim-Type Exit Device, when mounted on the inside of a door to block entry to a protected premises, securely locks the door from outside access while  allowing users inside the protected premises to exit. The stainless steel enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require exit. It can be connected to an entry-type lever trim or to any physical locking device on the outside of the door in order to allow entry to authorized personnel.

  • Pushbar is UL Listed in the U.S.
  • Allows exit from inside while locked from outside
  • Reversible, non-handed design
  • For metal or wood doors up to 13/4” (44mm) thick
  • Stainless-steel 3/4″ (19mm) throw latch bolt
  • Separate deadlocking latch — Prevents the use of credit cards or similar means to open the latch bolt
  • Allen-type 1/4-turn dogging lock — Allows the exit bar to be unlocked for extended periods of time
  • Includes all needed hardware for typical installations
  • Works with standard external door handle/lock devices such as the SD-962HL-4A (not included)
  • Fits doors from 30″ (76cm) to 48″ (122cm) wide
  • Heavy-duty steel construction
  • Stainless steel spring
Door Type 1-3/4″ (44.5mm) thick, wood or metal
Hand Type Non-handed
Latch Bolt Stainless steel, 3/4″ (19mm) throw
Dead Latch Stainless steel, 5/8″ (16mm)
Strike For 5/8″(16mm) stop plus shim for 1/2″ (12.7mm) stop
Spring Stainless steel
Chassis Steel
Cover High-density, rust-resistant alloy
Rail Assembly Steel
End Cap Steel
Dogging Allen-type dogging standard
Dimensions 32-3/4″x6-1/4″x2-1/2″ (832x158x64 mm)
Weight 6-lb 10-oz (3.0kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Rugged Grade 1 Rim-Type Exit Device, Push-to-Exit Bar

The ENFORCER SD-962AR-36G Rim-Type Exit Device, when mounted on the inside of a door to block entry to a protected premises, securely locks the door from outside access while allowing users inside the protected premises to exit. The stainless steel enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require exit. It can be connected to an entry-type lever trim or to any physical locking device on the outside of the door in order to allow entry to authorized personnel.

  • Pushbar is UL Listed for U.S. and Canada
  • Heavy-duty ANSI Grade 1 steel construction
  • Allows exit from inside while locked from outside
  • Reversible non-handed design
  • UL Listed, ANSI/BHMA A156.3 – (2008) requirements for Grade 1, UL 305​
  • For metal or wood doors up to 13/4” (44mm) thick
  • Separate deadlocking latch prevents the use of credit cards or similar means to open the latch bolt
  • Allen-type 1/4-turn dogging lock allows the exit device to be unlocked for extended periods of time
  • Includes all needed hardware for typical installations
  • Works with standard external door handle/lock devices such as the SD-962HL-4A (not included)
  • Fits doors from 33″ (84cm) to 48″ (122cm) wide
Construction ANSI Grade 1 steel
Door Type Up to 1-3/4″ (44mm) thick, wood or metal
Hand Type Non-handed
Latch Bolt Stainless-steel, 3/4″ (19mm) throw
Dead Latch Stainless-steel 5/8″ (16mm)
Strike For 5/8″ (16mm) stop
Spring Stainless steel
Chassis Plated steel
Cover Plated zinc cast
Rail Assembly Aluminum
End Cap Plated zinc cast
Dogging Hex-type dogging standard
Dimensions 33″x8″x2-3/16″ (838x203x56 mm)
Weight 9-lb 12-oz (4.4kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

MOUNTING TEMPLATE

Mechanical Keypad Door Lock

The SECO-LARM Mechanical Keypad Door Lock provides secure locking while avoiding the hassle and cost of dealing with providing, duplicating, or replacing keys. Unlike keyed locks, the lock code can be easily changed by the user at any time. The code is not sequential, so the code letters/digits can be entered in any order. Since it is completely mechanical, there is no need to run wires from a power supply or replace batteries. The inside handle always operates to allow safe egress in an emergency.

 Non-handed installation
 External and internal entry lever
 13 code buttons, over 8,000 possible codes
 Lock code easily changed
 Suitable for door thicknesses from1-3/16″~2-1/8″ (30~54 mm)
 Tubular latchbolt included
 Heavy-duty steel case US32D/630
 Fully mechanical
 No batteries or other power source required
 Free egress from inside
 Indoor or outdoor use
 Simple Installation
Type Fully mechanical keypad lock
Code length 4~6 Digits (0~9, X, Y, and Z)
Handed Field reversible (factory default – internal, right-handed / external, left-handed)
Bolt throw 1/2″ (13mm)
Backseat 2-3/4″ (70mm)
Housing Heavy-duty satin finish stainless steel US32D/630
Dimensions 2″ x 4-3/4″ x 5-1/2″ (50x120x140 mm)
Weight 3-lb 1-oz (1.35kg)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM


Entry-Type Lever Trim for Rim-Type Exit Devices on Exit Doors


Door type 1-3/4” thick, wood or metal
Hand type Non-handed
Latch bolt Stainless-steel, 3/4” throw
Dead latch Stainless-steel, 5/8”
Strike For 5/8”stop plus shim for 1/2” stop
Spring Stainless-steel
Chassis Steel
Cover High-density, rust-resistant alloy
Rail assembly  Steel
End cap  Steel
Dogging Allen-type dogging standard

PRODUCT INFORMATION SHEET (PI)

MANUAL

  • Converts cylindrical lock sets into an electronic access-controlled locking system
  • Fail-secure operation – Door remains locked if power to the strike is lost
  • 2-wire installation, non-polarized connection
  • Stainless steel keeper for strength and long life
  • Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut* Strike Plates
  • Can be used with virtually any cylindrical door locking system
  • Can be used with an optional digital keypad, pushbutton switch, and other entry devices.
  • Suitable for office-type applications
  • Reversible non-handed design fits either right-hand or left-hand doors
  • Shallow design for use with most metal doors
  • Powered by a solenoid, not a buzzer coil
  • For indoor use​
  • Optional Bronze-Colored Aluminum Low-Cut* Strike Plate (SD-991RA-61Q/B) available:

*Fits most metal or wood doors with minimum cutting of door frame beyond the hole for the strike

Operating Voltage 12VDC
Current Draw 280mA@12VDC
Latch Throw 1/2″ (13mm)
Static Strength 1,000-lb (454kg)
Endurance 250,000 Cycles (Factory tested)
Operating Temperature 14°~120° F (-10°~49° C)
Operating Humidity 0~85% (Non-condensing)
Dimensions Stainless Steel No-Cut Plate: 2-3/4″x1-1/8″x15/16″ (70x28x24 mm)

PRODUCT INFORMATION SHEET (PI)

MANUAL

DIAGRAM

ADVERTISEMENT

Reversible Electric Door Strikes for Wood Doors, Asymmetric*

The SECO-LARM® Electric Strikes are the ideal way to convert cylindrical lock sets into an electronic access-controlled locking system. The strikes come in two varieties: asymmetric and symmetric. Both models come with a reversible faceplate for right-hand or left-hand doors and have a fail-secure operation.

*The strike portion is not centered on the reversible faceplate

  • 8~16VAC / 12VDC Operating voltage
  • For use on wood doors
  • Can be used with virtually any cylindrical-door locking system
  • Fail-secure operation
  • US26D Chrome faceplate
  • Miniature lock body for easier installation
  • Faceplate size: 57/8” x11/4” x1/8” (150x32x3.2 mm)
  • Corrosion-resistant case and moving parts
  • 1,000-lb (453kg) Jaw strength
  • Tested to 500,000 cycles
  • Reversible for right- or left-hand doors
  • Current draw: 800mA@16VAC 750mA@12VDC
  • Keeper depth: 21/32” (16.8mm)
  • Latch depth: 3/4” (19mm)
  • Strike depth: 11/2” (38mm)
Operating Voltage 8~16 VAC/12VDC
Operation Fail secure
Current Draw 800mA@16VAC, 750mA@12VDC
Operating Temperature 14º~113º F (-10º~45º C)
Weight 10.3-oz (292g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Reversible Electric Door Strike for Wood Doors, Symmetric, Fail-Secure, 8~16VAC / 12VDC

The SECO-LARM® Electric Strikes are the ideal way to convert cylindrical lock sets into an electronic access-controlled locking system. The strikes come in two varieties: asymmetric and symmetric. Both models come with a reversible faceplate for right-hand or left-hand doors and have a fail-secure operation

*The strike portion is centered on the reversible faceplate

  • 8~16VAC / 12VDC Operating voltage
  • For use on wood doors
  • Can be used with virtually any cylindrical-door locking system
  • Fail-secure operation
  • US26D Chrome faceplate
  • Miniature lock body for easier installation
  • Faceplate size: 57/8“x11/4“x1/8” (150x32x3.2 mm)
  • Corrosion-resistant case and moving parts
  • 1,000-lb (453kg) Jaw strength
  • Tested to 500,000 cycles
  • Reversible for right- or left-hand doors
  • Current draw: 800mA@16VAC 750mA@12VDC
  • Keeper depth: 21/32” (16.8mm)
  • Latch depth: 3/4” (19mm)
  • Strike depth: 11/2” (38mm)
Operating Voltage 8~16 VAC/12VDC
Operation Fail secure
Current Draw 800mA@16VAC, 750mA@12VDC
Operating Temperature 14°~113° F (-10°~45° C)
Weight 10.3-oz (292g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

Seco-Larm SD-995A-A1Q Electric Strike

Reversible Electric Door Strike w horizontal adjustment for wood & metal doors, fail secure

  • 1/4” Horizontal keeper adjustment compensates for installation difficulties such as warped doors, different-sized latch bolts, etc.
  • Unique design accommodates both wood and metal doors
  • Fail-secure operation
  • Reversible for right or left-handed doors
  • Durable stainless-steel faceplate
  • Miniature lock body for easier installation
  • Corrosion-resistant case and moving parts
  • Complete mounting hardware included
  • Screw terminals for ease of wiring
  • Operating voltage: 8~16VAC/12VDC
  • 1,000-lb (453kg) Jaw strength
  • Tested to 500,000 cycles
  • Current draw: 750mA@12VDC
  • Keeper depth: 21/32” (16.8mm)
  • Latch depth: 3/4” (19mm)
  • Strike depth: 11/2″ (38mm)
  • ANSI Faceplate size: 47/8“x11/4“x1/8” (124x32x3.2 mm)
  • Optional ANSI Faceplate SD-995RE-21Q
Operating Voltage 8~16 VAC/12VDC
Operation Fail-secure
Current Draw 800mA@16VAC, 750mA@12VDC
Latch Throw 5/8″ (16mm)
Jaw Strength 1,000-lb (453kg)
Design Reversible Non-Handed
Strike Depth 1-1/2″ overall (38mm)
Adjustable Keeper Max. 1/4″ (6mm)
Operating Temperature 14°F~113°F (-10°~45° C)
Dimensions 4-7/8″x1-1/4″x1/8″ (124x32x3.2 mm) (Faceplate)
Weight 10.3-oz (292g)

PRODUCT INFORMATION SHEET (PI)

MANUAL

SD-995A-D3Q

Weatherproof Door/Gate Strike

  • Unique design accommodates both wood and metal doors
  • Fail-secure operation
  • Reversible for right or left-handed doors
  • Zinc alloy body
  • Corrosion-resistant case and moving parts
  • Complete mounting hardware included
  • Operating voltage: 12~24 VAC/VDC
  • 1,034-lb (470kg) Holding force
  • Tested to 250,000 cycles
  • Current draw: 500mA@12VDC, 1A@24VDC
  • Strike depth: 9/16” (15mm)
  • Faceplate size: 31/2“x17/16“x1/8” (89x35x3 mm)
  • Weather-resistant IP42
Operating Voltage 12~24 VAC/VDC
Operation Fail-Secure
Current Draw 500MA@12VDC , 1A@24VDC
Keeper Width 1-5/8″ (41mm)
Design Reversible non-handed
Strike Depth 9/16″ (15mm)
Operating Temperature 14°~113° F (-10°~45° C)
Operating Humidity 0~95% RH (no condensation)
Dimensions 3-1/2″x1-7/16″x1/8″ (89x35x3 mm)
Holding Force 1,034-lb (470kg)
IP Rating Weather-resistant IP42

PRODUCT INFORMATION SHEET (PI)

MANUAL

ADVERTISEMENT