| Finish | |
| Finish |
|
| Finish Description | Satin Stainless Steel |
| Technical Specs | |
| Physical Appearance | Wide Stile Pushpad |
| Device Type | Rim |
| Device Length | 36 In. |
| Switch Type | Touchbar Monitor |
| Electric Options | Electric Latch Retraction |
| Includes Trim | No |
| Fire Rated | No |
| Product Type | Rim Exit Devices |
| BAA Qualified | Yes |
| Limited Warranty | 1 Year |
| Fire Rated | 3 Hours {A} |
| Finish | |
| Finish |
|
| Finish Description | Dark Oxidized Satin Bronze Oil Rubbed |
| Technical Specs | |
| Physical Appearance | Wide Stile Pushpad |
| Device Type | Surface Vertical Rod |
| Device Length | 36 In. |
| Switch Type | Touchbar Monitor |
| Mechanical Options | Less Bottom Rod |
| Includes Trim | No |
| Fire Rated | Yes |
| Product Type | Surface Vertical Rod Exit Devices |
The Push/Pull Guard includes a pull handle and is for use with latch or bolt locks. It fits underneath the lock and can cover existing holes. The guard comes pre-drilled for mounting with pull handle at the bottom.
– Easy to install
– Replaces Door Knob
PPG
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices. The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.
This solenoid rim strike is a surface-mounted electric strike designed to work with Pullman style rim exit device latches. Designed to fit in tight situations where the exit device is mounted very close to the door frame, e.g. aluminum storefront applications.
The 2 series are versatile, all-in-one, electric strikes that combine strength and convenience in a sleek design. The RCI F2164 & 2364 strikes feature an adjustable deadbolt keeper and deadlatch ramp allowing them to flexibly work with most locks. The "Saw-tooth Adjustment Locator" makes installation simple. It allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. It also includes a trim plate to cover up an irregular frame cut-out. Everything you need for the strike is in the box, including a faceplate for centerline latch entry.
The 4 series centerline strike accommodates ¾” latch projections. Its various faceplate options and 1-1/2” cut-out depth accommodates most door frame types and materials. Installation is simple with standard mounting tabs and included fasteners. Crossed wires are never a problem, as the coil is not polarity sensitive. The RCI 4 series centerline strikes are available with an optional 1-1/2 hour fire-rating. 41 Series depicts fail-secure and 43 Series depicts fail-safe.
The MultiMag® series of electromagnetic locks are designed for easy installation and multi-purpose operation for interior or perimeter doors. The mounting bracket has keyhole mounting to support the magnet, freeing the installer's hands to affix the magnet mounting screws. The removable cavity cover offers quick, easy access to wiring. The RCI 8310 MultiMag® applies to single outswinging doors, while the RCI 8320 MultiMag® is for double outswinging doors. For additional security monitoring these electromagnetic locks offer optional door status & security condition sensors.
| Technical Specs | |
| Operating Voltages | 12/24 VDC |
| Relay Action | Momentary |
| Relay Type | SPDT |
| Sensor Technology | Capacitive |
| Range | 1" to 2" |
| Mounting Plate Size | 1 Gang |
| Environment | Indoor |
| Product Type | Touchless Actuators |
The 6 series centerline strikes are available in standard profile or low-profile options to accommodate different latch projections. This heavy-duty series combines several requested key features. Standard features include a multi-voltage single solenoid, selectable lock mode (no tools necessary), horizontal adjustment, and plug-in wire connectors. ¼” horizontal adjustment makes installations faster and easier. Plus, with the RCI 6 series there will be less pressure on installer’s strike inventory, because these RCI strikes do it all.
The 2 series are versatile, all-in-one, electric strikes that combine strength and convenience in a sleek design. The RCI F2164 & 2364 strikes feature an adjustable deadbolt keeper and deadlatch ramp allowing them to flexibly work with most locks. The "Saw-tooth Adjustment Locator" makes installation simple. It allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. It also includes a trim plate to cover up an irregular frame cut-out. Everything you need for the strike is in the box, including a faceplate for centerline latch entry.
The VR165 vertical rod strike is designed for use with vertical rod exit devices with roller latch. This surface mounted strike accommodates 5/8” roller latch. The heavy-duty RCI VR165 is made of high grade stainless steel offering superior keeper strength. The conventional keeper design (one moving part) promotes even load distribution. To prevent vibration manipulation the RCI VR165 has a horizontal solenoid. Lockdown tabs provide a secure mount with HEX socket head cap screws for added support and tamper resistance.
This extremely popular mailbox is offered in a medium size with a smooth exterior surface that is perfect for most residences. It incorporates a steel latch, and the door is embossed with an eagle, giving the Elite mailbox a classy appearance that is a nice accompaniment to any landscape. The mailbox can capably hold mail, magazines, padded envelopes and small boxes. It is constructed from rust-resistant galvanized steel that provides strength and stability, while a powder-coated finish minimizes weathering. Sold fully assembled, the Elite mailbox is ready to use upon unboxing. The post is sold separately and not included in this package.
Color Family:
Access Type:
Mailbox Material:
Compatibility Code:
Security:
Size:
Dimensions:
Weight:
Capacity:
Warranty:
The Smok-Chek V is an electrified closer ideal for cross corridor doors, swinging in the same direction.
Single-point hold open
Push or pull side mounting
Non-handed
Hold open range depends on push or pull side mounting
Mounts on a 2" header
Doors up to 4'0"
Maximum door weight 250lbs.
Concealed switch disconnects hold open
Adjustable spring surface closer
Maxium reveal (pull side): 1/8"
Standard reveal (push side): 3-1/2". For reveals up to 5-1/2", use 550789 arm
Voltage: 24VAC/DC or 120VAC
Models available without closer
Ideal for low ceiling clearance applications
Doors automatically close if activated by fire alarm
CAL FIRE, 3550-0047:0015
UL-cUL Fire-Rated Up to 3 Hours
Application
• Interior Doors
• Weight to 300 lbs.*
• Door Width up to 3'6" (1067mm)
• Handed
• Light-Duty/Light Weight Pivot Set
* Door size & weight guidelines are determined using the appropriate number of intermediate pivots
• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into floor
• Available for fire door assemblies up to three hours – specify F117. Intermediate pivot required by UL. Specify FM19, (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 150 lbs) for doors with cladding or frame molding.
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting
|
|
|
 Bright Bronze 611 |
 Satin Bronze 612 |
 Oil Rubbed Bronze 613 |
|
|
 Bright Nickel 618 |
 Satin Nickel 619 |
 Flat Black 622 |
 Bright Chrome 625 |
|
|
 Sprayed Aluminum 689 |
 Sprayed Dark Bronze 690 |
 Sprayed Light Bronze 691 |
 Sprayed Gold 696 |
|
Powder Coat BSP |
White Suede |
|
Model 117, 3/4" Offset Pivot Set Installation Instructions
Model 117, 3/4" Offset Pivot Set Template
Model 117, 1-1/2" Offset Pivot Set Installation Instructions
Application
• Interior Doors
• Weight to 250 lbs.*
• Door Width up to 3'6" (1067mm)
• Handed
• Light-Duty/Light Weight Jamb Attached Pivot Set
* Door size & weight guidelines are determined using the appropriate number of intermediate pivots
• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into side jamb
• Not available for fire-rated doors
• Non-ferrous base material
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Door edges must be beveled 1/8" in 2"
• Weight of door borne by floor
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
|
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
|
Powder Coat BSP |
White Suede |
|
Model 117-1/4, 3/4" Offset Pivot Set Installation Instructions
Application
• Interior Doors
• Weight to 200 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Jamb Attached Pivot Set
Center hung pivots are door hanging means only. To close doors, see floor closer sections.
• Standard top pivot 320 included
• Bottom pivot mortised into side jamb
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard
|
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
|
Powder Coat BSP |
White Suede |
Model 127-3/4 Center Hung Pivot Set Installation Instructions
Model 127-3/4 Center Hung Pivot Set Template
Application
• Interior Doors
• Weight to 250 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Pivot Set
Center hung pivots are door hanging means only. To close doors, see floor closer sections.
• Standard top pivot 320 included
• Bottom pivot mounts directly to floor
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard
|
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
|
Powder Coat BSP |
White Suede |
Model 128-3/4 Center Hung Pivot Set Installation Instructions
The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.
3/4" Offset Pivot
Application
Exterior or Interior Doors
Weight to 600 lbs.*
Door Width up to 4'0" (1219mm)
Handed
Standard-Duty Pivot Set
* Door size & weight guidelines are determined using the appropriate number of intermediate pivots
Standard top pivot 180 included
M19 intermediate pivot required (order separately)
Bottom pivot mounts directly to floor
Uses same arm and cap as 27 floor closer
Available for fire door assemblies up to three hours (ferrous material) – specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
For 20-minute label suffix “–20” to the part number
Non-ferrous base material
Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
3/4" (19mm) offset (measured from centerline of pivot to face of door)
Available for 1-1/2" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
Door edges must be beveled 1/8" in 2"
Furnished with wood and machine screws
Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
Doors will swing 180°, trim permitting
|
|
|
Bright Bronze 611 |
Satin Bronze 612 |
Oil Rubbed Bronze 613 |
|
|
Bright Nickel 618 |
Satin Nickel 619 |
Flat Black 622 |
Bright Chrome 625 |
|
|
Sprayed Aluminum 689 |
Sprayed Dark Bronze 690 |
Sprayed Light Bronze 691 |
Sprayed Gold 696 |
|
Powder Coat BSP |
White Suede |
Model 147, 3/4" Offset Pivot Set Installation Instructions
Model 147, 3/4" Offset Pivot Set Template
Model F147, 3/4" Offset Pivot Set Installation Instructions
Model F147, 3/4" Offset Pivot Set Template
Model 147, 1-1/2" Offset Pivot Set Installation Instructions
Model 147, 1-1/2" Offset Pivot Set Template
Model F147, 1-1/2" Offset Pivot Set Installation Instructions
