Products

Sort by

Show
24
36
48

910TC Series 12/24 VDC Touchless Actuators, Waving Hand Icon, Black Finish

Aesthetically pleasing designs.
Hands-free – helps reduce the spread of germs and bacteria.
Adjustable detection zone to reduce unwanted activations.
When the device is activated, the indicator light (waving hand) will change color.
Secondary Normally Open (NO) mechanical switch in the event of a power loss.
Selectable unlock times (1-63 seconds).
Mounts on single-gang electrical box.
Available remote control to trigger switch remotely.
May be purchased as a kit (910TC-WRM-WRB). Includes 910TC Switch, 910TCWRM Remote Receiver Module and 910TC-WRB Remote Transmitter.
Meets ADA compliance to ANSI/BHMA A156.19
(Always check local building codes for compliance in your area)

Technical Specs
Operating Voltages	12/24 VDC
Relay Action	Momentary
Relay Type	SPDT
Sensor Technology	Capacitive
Range	1" to 2"
Mounting Plate Size	1 Gang
Environment	Indoor
Product Type	Touchless Actuators

RCI AL65 - L65U Electric Strike

from $ 122.00

RCI AL65 - L65U Electric Strike

by RCI

$ 122.00

Faceplate

Quantity

The 6 series centerline strikes are available in standard profile or low-profile options to accommodate different latch projections. This heavy-duty series combines several requested key features. Standard features include a multi-voltage single solenoid, selectable lock mode (no tools necessary), horizontal adjustment, and plug-in wire connectors. ¼” horizontal adjustment makes installations faster and easier. Plus, with the RCI 6 series there will be less pressure on installer’s strike inventory, because these RCI strikes do it all.

Energy: 375mA Field-Selectable 12/24VDC, 12-24VAC (At 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic (Grade 1, 04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
Endurance: 500,000 Cycles (Grade 1, 04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
Mode: Field-Selectable Fail-Secure & Fail-Safe
Monitoring: Optional Latch & Keeper Monitor Models Available
Warranty: 3 Year Limited Warranty

Technical Drawing

Installation manuals 6

RCI F2164 Fire Rated Electric Strike

$ 418.00

RCI F2164 Fire Rated Electric Strike

by RCI

$ 418.00

Quantity

Product Summary

The 2 series are versatile, all-in-one, electric strikes that combine strength and convenience in a sleek design. The RCI F2164 & 2364 strikes feature an adjustable deadbolt keeper and deadlatch ramp allowing them to flexibly work with most locks. The "Saw-tooth Adjustment Locator" makes installation simple. It allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. It also includes a trim plate to cover up an irregular frame cut-out. Everything you need for the strike is in the box, including a faceplate for centerline latch entry.

Energy: 375mA Field-Selectable 12/24VDC, 12-24VAC (Max at 12VDC) (12-24VAC not available with 2364 model)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure & Fail-Safe
Fire-Rated: Optional 3-Hour Model Available (Fire-rated (F) model only, 3-hour for single swing, 90-minutes for standard pair of doors)
Latch Monitor: Plug-In Latch Monitor Accessory Available

Product Details

Versatile strike designed to work with most locks
Accommodates 1/2" (12.7mm) to 3/4" (19mm) latch projection
Adjustable deadbolt keeper and deadlatch ramp
Accommodates up to 1" deadbolt (night-latch function only, bolt will not release)
Plug-in wire connectors
Runs cool – solenoid design prevents keeper from heating up
Trim plate included to cover up irregular frame cut-out
Stainless steel ensures superior strength and creates a sleek aesthetic
Includes two keeper shims – 1/16" (1.5mm) and 1/8" (3mm) –for horizontal adjustment for misaligned frames (unique sliding design)
Non-handed
375mA Field-Selectable 12/24VDC, 12-24VAC (Max at 12VDC) (12-24VAC not available with 2364 model)
1,500lbf Static 70ft-lb Dynamic
500,000 Cycles
Fail-Secure & Fail-Safe
Optional 3-Hour Model Available (Fire-rated (F) model only, 3-hour for single swing, 90-minutes for standard pair of doors)
Plug-In Latch Monitor Accessory Available
10 Year Limited Warranty

RCI VR165 Vertical Rod Electric Strike

$ 449.00

RCI VR165 Vertical Rod Electric Strike

by RCI

$ 449.00

Quantity

Product Summary

The VR165 vertical rod strike is designed for use with vertical rod exit devices with roller latch. This surface mounted strike accommodates 5/8” roller latch. The heavy-duty RCI VR165 is made of high grade stainless steel offering superior keeper strength. The conventional keeper design (one moving part) promotes even load distribution. To prevent vibration manipulation the RCI VR165 has a horizontal solenoid. Lockdown tabs provide a secure mount with HEX socket head cap screws for added support and tamper resistance.

Energy: 450mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70 Dynamic ft-lb
Endurance: 250,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited Warranty

Product Details

Accommodates 5/8" (16mm) roller latch
Heavy-duty, surface mounted strike
High grade stainless steel ensures superior keeper strength
Ensure proper latch alignment – up to 1/4" (6.4mm) adjustment to compensate for door and frame misalignments
Door stop adjustment for different rail thicknesses
Horizontal solenoid prevents manipulation from vibration
Conventional keeper design (one moving part) - promotes even load distribution
Lockdown tabs for secure mount
Non-handed
HEX socket head cap screws for added support and tamper-resistance
Plug-in wire connector
Installation tool included (HEX key)
450mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
1,500lbf Static 70 Dynamic ft-lb
250,000 Cycles
Fail-Secure
5 Year Limited Warranty

Residential ELITE Post Mount Mailbox USPS Aprroved | Gibraltar Mailboxes

$ 21.37

Residential ELITE Post Mount Mailbox USPS Aprroved | Gibraltar Mailboxes

by Florence Corp.

$ 21.37

Color

Quantity

This extremely popular mailbox is offered in a medium size with a smooth exterior surface that is perfect for most residences. It incorporates a steel latch, and the door is embossed with an eagle, giving the Elite mailbox a classy appearance that is a nice accompaniment to any landscape. The mailbox can capably hold mail, magazines, padded envelopes and small boxes. It is constructed from rust-resistant galvanized steel that provides strength and stability, while a powder-coated finish minimizes weathering. Sold fully assembled, the Elite mailbox is ready to use upon unboxing. The post is sold separately and not included in this package.

Color Family:

Black, White

Access Type:

Front Only

Mailbox Material:

Steel

Compatibility Code:

Security:

Non-Locking

Size:

Medium

Dimensions:

8.9" H x 6.9" W x 20.1" D

Weight:

4.6 lbs.

Capacity:

800 cubic in.

Warranty:

90 Day Limited

Rixson 0600 24VAC/DC 689 Smok-Chek V

$ 900.00

Rixson 0600 24VAC/DC 689 Smok-Chek V

by Rixson

$ 900.00

Voltage

Mounting

Quantity

The Smok-Chek V is an electrified closer ideal for cross corridor doors, swinging in the same direction.

Features

Single-point hold open
Push or pull side mounting
Non-handed
Hold open range depends on push or pull side mounting
Mounts on a 2" header
Doors up to 4'0"
Maximum door weight 250lbs.
Concealed switch disconnects hold open
Adjustable spring surface closer
Maxium reveal (pull side): 1/8"
Standard reveal (push side): 3-1/2". For reveals up to 5-1/2", use 550789 arm
Voltage: 24VAC/DC or 120VAC
Models available without closer

Benefit

Ideal for low ceiling clearance applications

Doors automatically close if activated by fire alarm

Specifications

Closer Type: Electromechanical
Handing: Non-handed
Warranty: 2-year limited warranty

Certifications

CAL FIRE, 3550-0047:0015

UL-cUL Fire-Rated Up to 3 Hours

Documentation

Catalog

Document Title	Link
Norton Rixson Electrified Closers and Holders Catalog	View

Installation Instructions

Document Number	Document Title	Link
ISFM0101	Norton Rixson Smok-Chek V Series Closer, Model 0101, Push Side Mounting, Independent Closing Means Installation Instructions	View
ISFM0600	Norton Rixson Smok-Chek V Series Closer, Model 0600K, Pull Side Mounting Installation Instructions	View
ISFM0601	Norton Rixson Smok-Chek V Series Closer, Model 0601K, Push Side Mounting Installation Instructions	View

Template

Document Number	Release Date	Document Title	Link
SC90120	5_2009	Norton Rixson Smok-Chek V Series Closer, Without Detector, FM-0600, Pull Side Mounting, 85° Thru Max Hold Open Template	View
SC90130	8_2013	Norton Rixson Smok-Chek V Series Closer, Without Detector, FM-0601K, Push Side Mounting, 85° Thru Max Hold Open Template	View
SC90110	5_2009	Norton Rixson Smok-Chek V Series Closer, Without Detector, FM-0101, Push Side Mounting, 85° Thru Max Hold Open Template	View
SC90100	5_2009	Norton Rixson Smok-Chek V Series Closer, without Detector, FM-0100, Pull Side Mounting, Independent Closer Mounting, 85° Thru Max Hold Open Template	View

Rixson 117 Pivot

from $ 386.00

Rixson 117 Pivot

by Rixson

$ 386.00

Finish

Handing

Quantity

Application
• Interior Doors
• Weight to 300 lbs.*
• Door Width up to 3'6" (1067mm)
• Handed
• Light-Duty/Light Weight Pivot Set

* Door size & weight guidelines are determined using the appropriate number of intermediate pivots

• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into floor
• Available for fire door assemblies up to three hours – specify F117. Intermediate pivot required by UL. Specify FM19, (order separately)
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material
• Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset (door weight 150 lbs) for doors with cladding or frame molding.
• Door edges must be beveled 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 117, 3/4" Offset Pivot Set Installation Instructions

Model 117, 3/4" Offset Pivot Set Template

Model 117, 1-1/2" Offset Pivot Set Installation Instructions

Model 117, 1-1/2" Offset Pivot Set Template

Rixson 117-3/4 Pivot

from $ 771.00

Rixson 117-3/4 Pivot

by Rixson

$ 771.00

Finish

Quantity

Application
• Interior Doors
• Weight to 250 lbs.*
• Door Width up to 3'6" (1067mm)
• Handed
• Light-Duty/Light Weight Jamb Attached Pivot Set

* Door size & weight guidelines are determined using the appropriate number of intermediate pivots

• Standard top pivot 180 included
• 119 intermediate pivot recommended (order separately)
• Bottom pivot mortised into side jamb
• Not available for fire-rated doors
• Non-ferrous base material
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Door edges must be beveled 1/8" in 2"
• Weight of door borne by floor
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 117-1/4, 3/4" Offset Pivot Set Installation Instructions

Model 117-1/4, 3/4" Offset Pivot Set Template

Rixson 127-3/4 Pivot

from $ 256.00

Rixson 127-3/4 Pivot

by Rixson

$ 256.00

Finish

Quantity

Application
• Interior Doors
• Weight to 200 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Jamb Attached Pivot Set

Center hung pivots are door hanging means only. To close doors, see floor closer sections.

• Standard top pivot 320 included
• Bottom pivot mortised into side jamb
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 127-3/4 Center Hung Pivot Set Installation Instructions

Model 127-3/4 Center Hung Pivot Set Template

Rixson 128-3/4 Center Hung Pivot

from $ 256.00

Rixson 128-3/4 Center Hung Pivot

by Rixson

$ 256.00

Finish

Quantity

Application
• Interior Doors
• Weight to 250 lbs.
• Door Sizes up to 3'6"x 8'6" (1067 x 2591mm)
• Non-handed
• Light-Duty/Light Weight Pivot Set

Center hung pivots are door hanging means only. To close doors, see floor closer sections.

• Standard top pivot 320 included
• Bottom pivot mounts directly to floor
• Weight of door borne by floor
• Pivot point centered in thickness of door
• Door must have radius on pivot edge
• Not allowed for use on labeled doors and frames
• Pivot point remains constant at 1-1/4 from the edge of the door
• Furnished with wood and machine screws
• Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 128-3/4 Center Hung Pivot Set Installation Instructions

Model 128-3/4 Center Hung Pivot Set Template

Rixson 1351 Gate Closer

$ 456.00

Rixson 1351 Gate Closer

by Rixson

$ 456.00

Quantity

The 1351 specialty closer is a single-acting closer for exterior ornamental iron gates up to 250lbs., recommended for high-end residences and commercial campus buildings.

Rixson 147 Offset Pivot

from $ 558.00

Rixson 147 Offset Pivot

by Rixson

$ 558.00

Handing

Finish

Quantity

3/4" Offset Pivot

Application
Exterior or Interior Doors
Weight to 600 lbs.*
Door Width up to 4'0" (1219mm)
Handed
Standard-Duty Pivot Set

* Door size & weight guidelines are determined using the appropriate number of intermediate pivots

Standard top pivot 180 included
M19 intermediate pivot required (order separately)
Bottom pivot mounts directly to floor
Uses same arm and cap as 27 floor closer
Available for fire door assemblies up to three hours (ferrous material) – specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
For 20-minute label suffix “–20” to the part number
Non-ferrous base material
Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
3/4" (19mm) offset (measured from centerline of pivot to face of door)
Available for 1-1/2" (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
Door edges must be beveled 1/8" in 2"
Furnished with wood and machine screws
Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
Doors will swing 180°, trim permitting

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 147, 3/4" Offset Pivot Set Installation Instructions

Model 147, 3/4" Offset Pivot Set Template

Model F147, 3/4" Offset Pivot Set Installation Instructions

Model F147, 3/4" Offset Pivot Set Template

Model 147, 1-1/2" Offset Pivot Set Installation Instructions

Model 147, 1-1/2" Offset Pivot Set Template

Model F147, 1-1/2" Offset Pivot Set Installation Instructions

Model F147, 1-1/2" Offset Pivot Set Template

Rixson 180 Offset Pivot

from $ 195.00

Rixson 180 Offset Pivot

by Rixson

$ 195.00

Finish

Quantity

Application
• Full Mortise
• Non-handed
• Standard Top Pivot

• Standard top pivot for most offset pivot sets and floor closers
• Oil-impregnated sintered bronze bushing
• Non-ferrous base material
• Available for fire door assemblies (ferrous material) – specify F180
• For 20-minute label suffix “–20” to the part number
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2" (38mm) offset
• Furnished with wood and machine screws
• Available with longer than standard pivot pins. Increments are 1/4" (6mm), 1/2" (13mm), 3/4" (19mm) only
• For extra wide or high traffic applications see Model H180

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivot & Pivot Sets Catalog

Model 180, 3/4" Offset Top Pivot Installation Instructions

Model 180, 3/4" Offset Top Pivot Template

Model F180, 3/4" Offset Top Pivot Installation Instructions

Model F180, 3/4" Offset Top Pivot Template

Model 180, 1-1/2" Offset Top Pivot Installation Instructions

Model 180, 1-1/2" Offset Top Pivot Template

Rixson 27 3/4" Offset Floor Closer

from $ 1,503.00

Rixson 27 3/4" Offset Floor Closer

by Rixson

$ 1,503.00

Handing

Hold Open

Degree

Quantity

The 27 is a 3/4" offset-hung floor closer designed for standard door frame installation for interior or exterior doors weighing up to 450lbs.

Product overview

Single acting, handed

Exterior or interior doors

180 top pivot included

M19 intermediate pivots required (order separately)

Available non-hold open (N) or selective hold open (S) at same degree as dead stop

Built-in positive dead stop prevents doors from swinging beyond the desired opening degree; specify 85°, 90°, 95° or 105°

Separate independent valves for closing speed, latch speed, and backcheck

Vertical door adjustment

Available with floor plate or threshold installation

Cycolac, rust-proof cement case

Doors 60" to 90" in height should use one intermediate pivot - each additional 30" warrants another intermediate pivot

Extended spindles available in 1/2" increments up to 2" longer than standard

Available 1-1/2" offset, for doors with 3/4" cladding or frames with applied molding (max door weight 250lbs.)

Door width up to 4' 0"

Door weight up to 450lbs.

Aesthetically appealing way to support and control the door

Heavy-duty closer constructed with robust materials and internal components for long life and consistent operation
Heavy-duty hardened one-piece steel spindle designed to provide positive dead stop
Built-in positive dead stop prevents door from swinging beyond the desired opening degree
Multiple valves provide precision adjustment and enhanced control
Weight of door is supported by floor closer

Specifications

Filter

Closer Type: Floor

Maximum Door Weight: 450 lbs

Traffic Rating: High Traffic

Warranty: 10-year limited warranty

Certifications

ANSI/BHMA A156.4, Grade 1

Certain models UL Listed (F prefix)

Certain models meet ANSI A117.1 (PH prefix)

Fire rated for 20 minute labeled doors (suffix -20)Specifications
Filter
Closer Type: Floor
Maximum Door Weight: 450 lbs
Traffic Rating: High Traffic
Warranty: 10-year limited warranty
Certifications
ANSI/BHMA A156.4, Grade 1

Certain models UL Listed (F prefix)

Certain models meet ANSI A117.1 (PH prefix)

Fire rated for 20 minute labeled doors (suffix -20)

Rixson 27 LAP Floor Closer Less All Parts

from $ 1,023.00

Rixson 27 LAP Floor Closer Less All Parts

by Rixson

$ 1,023.00

Handing

Hold Open

Degree

Quantity

The 27 is a 3/4" offset-hung floor closer designed for standard door frame installation for interior or exterior doors weighing up to 450lbs.

Product overview

Aesthetically appealing way to support and control the door

Heavy-duty closer constructed with robust materials and internal components for long life and consistent operation
Heavy-duty hardened one-piece steel spindle designed to provide positive dead stop
Built-in positive dead stop prevents door from swinging beyond the desired opening degree
Multiple valves provide precision adjustment and enhanced control
Weight of door is supported by floor closer

Specifications

Filter

Closer Type: Floor

Maximum Door Weight: 450 lbs

Traffic Rating: High Traffic

Warranty: 10-year limited warranty

Certifications

ANSI/BHMA A156.4, Grade 1

Certain models UL Listed (F prefix)

Certain models meet ANSI A117.1 (PH prefix)

Fire rated for 20 minute labeled doors (suffix -20)Specifications
Filter
Closer Type: Floor
Maximum Door Weight: 450 lbs
Traffic Rating: High Traffic
Warranty: 10-year limited warranty
Certifications
ANSI/BHMA A156.4, Grade 1

Certain models UL Listed (F prefix)

Certain models meet ANSI A117.1 (PH prefix)

Fire rated for 20 minute labeled doors (suffix -20)

Rixson 340 Center Hung Pivot

from $ 126.00

Rixson 340 Center Hung Pivot

by Rixson

$ 126.00

Finish

Quantity

Rixson 340 Center Hung Pivot

Application
• Fully Concealed
• Non-handed

• Standard top pivot for Models 370 and 117-3/4 pivot sets. Also used for 28, 30, 40 and 50 Series floor closers
• Walking beam-type pivot – 1/2" (13mm) diameter pivot pin with 3/4" (19mm) engagement
• Oil-impregnated sintered bronze bushing
• Completely concealed when door is closed
• Furnished with wood and machine screws
• Available with longer than standard pivot pins. Increments are 1/4" (6mm), 1/2" (13mm), 3/4" (19mm) only

Bright Brass 605	Satin Brass 606	Bright Bronze 611	Satin Bronze 612	Oil Rubbed Bronze 613
Dark Oxidized Satin Bronze, Equivalent 613E	Bright Nickel 618	Satin Nickel 619	Flat Black 622	Bright Chrome 625
Satin Chrome 626	Sprayed Aluminum 689	Sprayed Dark Bronze 690	Sprayed Light Bronze 691	Sprayed Gold 696
Black Suede Powder Coat BSP	White Suede Powder Coat WSP

Pivots & Pivot Sets Catalog

Model 340 Center Hung Top Pivot Installation Instructions

Model 340 Center Hung Top Pivot Template

Rixson 370 626 Pivot

$ 315.00

Rixson 370 626 Pivot

by Rixson

$ 315.00

Quantity

Center Hung Pivot Set, Includes 340 Top Pivot, Satin Chromium Plated

Manufacturer	Rixson
SKU	370 626
---	---
Installation	—
Origin	—
Unit of Measure	Each
Base Material	Brass or Bronze
Limited Warranty	2 Years
Finish
Finish	626/US26D
Finish Description	Satin Chrome

Rixson M19 Pivot

$ 282.00

Rixson M19 Pivot

by Rixson

$ 282.00

Finish

Hand

Quantity

Application
• Full Mortise
• Handed

• Not load-bearing
• Maintains door alignment
• Aids in installing floor closers and bottom pivots
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base metal
• 3/4" (19mm) offset
• Available for 1-1/2" (38mm) offset
• Available for fire door assemblies (ferrous material) – specify FM19
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• Door edges must be beveled in 1/8" in 2"
• Furnished with wood and machine screws

Pivots & Pivot Sets Catalog

Model M19, 3/4" Offset Intermediate Pivot Installation Instructions

Model M19, 3/4" Offset Intermediate Pivot Template

Model M19, 1-1/2" Offset Intermediate Pivot Installation Instructions

Model M19, 1-1/2" Offset Intermediate Pivot Template

Rofu 8031-002 Shear MagLock

$ 520.00

Rofu 8031-002 Shear MagLock

by Rofu

$ 520.00

Quantity

Shear Lock

ROFU’s 8031-002 Shear Lock features 2200 LB holding force for enhanced security and SPDT relay output for remote monitoring. It is suitable for dual swinging doors, glass doors, in semi-surface and fully surface installation. 8031-002 features monitoring and bond sensor functions.

Technical Specifications:

Door position sensor: dry reed contact and adjustable magnet
Maximum gap (between magnet and armature plate): 1/8” or 3 mm
Relock delay: 1~6 seconds, 3 seconds is default
Fail-safe: releases instantly when power is disconnected with no residual magnetism
Fail alarm: may be released upon activation of fire alarm
Magnet and armature plate finish: zinc Housing: black powder coating
Designed for dual swinging doors, suitable for narrow frames and glass doors installation
Can be installed horizontally or vertically

INSTALLATION

Data Sheet

Rofu 8035 Shear Maglock

from $ 357.00

Rofu 8035 Shear Maglock

by Rofu

$ 357.00

Options

Quantity

Mini Shear Lock

ROFU’s 8035 Mini Shear Locks are fail-safe, 12/24 VDC selectable magnetic locks. The magnetic shear locks are compact solutions, designed for dual swinging interior doors and can be installed in horizontal or vertical position. 8035-002 features monitoring and bond sensor functions.

Technical Specifications:

Dual voltage 12/24 VDC field selectable
Maximum gap (between magnet and armature plate) : 2 mm
Fail-safe: releases instantly when power is disconnected
Fail alarm: may be released upon activation of fire alarm
Magnetic bond sensor output: SPDT rated: 0.5 A/125 VAC ; 1 A/ 24 VDC (on 8035-002 model only)
Magnet and armature finish: zinc plating
Designed for dual swinging doors, suitable for narrow frames and glass doors installation
Can be installed horizontally or vertically
No residual magnetism

INSTALLATION

Data Sheet

Rofu 8406M Mini Maglock

$ 195.00

Rofu 8406M Mini Maglock

by Rofu

$ 195.00

Quantity

Mini Maglock

8406M Mini Sliding Door Electromagnet is a compact mortise maglock made with steel housing and is a durable option for high frequency use. It is ideal for securing sliding or swinging, manual or automatic doors.

Technical Specifications:

Easy installation: versatile mounting brackets included for new and existing installation
Magnet designed to mortise into the jamb
Armature plate mortises into the edge of sliding door
Fail-safe: releases instantly when power is disconnected
Fail alarm: may be released upon activation of fire alarm
No residual magnetism

INSTALLATION

Data Sheet

S Parker 950 Door Closer

from $ 46.00

S Parker 950 Door Closer

by S. Parker

$ 46.00

Model

Finish

Quantity

US Lock Supply Stocks S Parker Door Closers Ready To Ship For Free On Orders Over $189. The 950 closer features 2 speed controls for closing and latching. Non-handed and using the same template as many other national brands, including the Parker 500, the Yale 50 and the Norton 1600, the S. Parker 950 is a rack and pinion action door closer with all temperature hydraulics in an aluminum housing. Separate controls adjust, at any time, both closing and latching speeds. A fully adjustable model with back check is available.

953 #3 To Be Used With A Medium/Heavy Duty
36" Wide Interior or
30" Wide Exterior Door

954 #4 To Be Used With A Heavy Duty
48" Wide Interior or
36" Wide Exterior Door

Finishes:

Aluminum

Duranodic

S. Parker guarantees trouble free operation of each closer for 10 years. Each unit is UL tested, and listed for use on hollow metal fire rated doors. The exterior housing is made of high tensile strength aluminum. Available in aluminum and duranodic, the S. Parker 950 series fits even extra heavy doors.

S. Parker 441 BC Aluminum Series Door Closer

$ 115.00

S. Parker 441 BC Aluminum Series Door Closer

by S. Parker

$ 115.00

Quantity

US Lock Supply Stocks S Parker Door Closers Ready To Ship Free On Orders Over $189.

Crossover Footprint
The following manufacturers’ products fit the
same physical footprint as our 441 BC Series
Door Closer.Same hole positions as:
• LCN 4041
• Norton 7500/7700
• Dorma 8916
• Dor-O-Matic SC70
• SARGENT 351
• Yale P400/4400
• RYOBI D3530

A power adjustable door closer that features a cast iron body and is ANSI A156.4 Grade 1 and ANSI A117.1 compliant. It is also UL Listed. Manufactured under ISO 9002 guidelines, this ADA (Handicap) multi-sized closer has adjustable Spring Power for a range of sizes which can be adjusted after installation. The 441 BC Series comes with a choice of three arm types: Heavy Duty Stop Arm with Hold Open, Heavy Duty Arm, or Standard Arm. Same template as the domestic brands.

Features:
• Cast iron body
• ANSI A156.4, Grade1 and
ANSI A117.1 compliant
• UL listed
• ADA (Handicap) multi-sized closers with adjustable Spring Power for a Range of sizes, adjustable after installation
• Manufactured under
ISO 9002 guidelines
• Available in a choice of three
arm types, heavy duty STOP
arm with hold open, heavy
duty arm, or standard arm

Functions:
• Tri-Style installation: installs regular,
parallel arm or top jamb.
• Non-handed: installs on either side of
door.
• Adjustable sweep and latch speeds:
separate valves to adjust each speed.
• Adjustable backcheck: standard.
• Adjustable delayed action closing option
available.
• Installs 3 ways: regular arm, parallel arm
and top jamb.
• Cover: high impact, UL listed molded
plastic full cover.
• Power of closer can be adjusted to
conform to the requirements of the
American with Disabilities Act (ADA)
and as outlined in ANSI A 117.1
Specifications for Making Buildings
and Facilities Accessible to, and Usable
by the Physically Disabled.
• Door Opening: regular arm 120°,
parallel arm 180° and top jamb 120°.

Safe Lock S9100 Single Cylinder Deadbolt

from $ 10.75

Safe Lock S9100 Single Cylinder Deadbolt

by Safe Lock

$ 11.10

Finish

Quantity

Features

Providing you with quality, dependability, and security with this Safe Lock product

For use on exterior doors where keyed entry and security is needed

Deadbolt operated by key outside and thumb turn inside

Comes with 2 keys

Latch has round corner faceplate

ANSI/BHMA grade 3 certified

Locking mechanism functions with turn piece on the interior of the lock

Easily installs in minutes with just a screwdriver

Lifetime mechanical and finish warranty

Salsbury Key Keeper

$ 95.00

Salsbury Key Keeper

by Salsbury

$ 95.00

Finish

Mounting

Quantity

Salsbury 1090 Key Keepers - Recessed Mounted - U.S.P.S. Access

Features

Allows the U.S.P.S. to access a key and deliver the mail
Ideal for apartments or condominiums where restricted access to a building is required
Constructed of 20 gauge steel
Feature a durable powder coated finish available in aluminum and bronze
Unit size: 6" W x 3-1/4" H x 2" D
Rough opening: 5'' W x 2-1/2'' H x 1-3/4'' D
Fits into a rough opening and is secured with mounting hardware (not included) through the back or side panels
Salsbury Industries is an ISO 9001:2015 certified company and has excelled in the field of manufacturing since 1936

Downloads

More Product Information

Sargent 10G04 Storeroom or Closet Lever Lock

from $ 444.00

Sargent 10G04 Storeroom or Closet Lever Lock

by Sargent

$ 479.00

Cylinder

Quantity

Sargent 10G04 Storeroom or Closet Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G04 Storeroom or Closet Lever-

• Deadlocking latch

• Latch by lever inside or key outside

• Outside lever rigid at all times

• ANSI F86

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G05 Entrance or Office Lever Lock

from $ 444.00

Sargent 10G05 Entrance or Office Lever Lock

by Sargent

$ 479.00

Cylinder

Quantity

Sargent 10G05 Entrance or Office Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G05 Entrance or Office Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push/turn button in inside lever

• Push button released by key outside or lever inside

• Turn button must be released manually

• Key retracts latch when outside lever is locked

• ANSI F109

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G13 Exit Lever Lock

$ 427.00

Sargent 10G13 Exit Lever Lock

by Sargent

$ 427.00

Quantity

Sargent 10G13 Exit Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G13 Exit Lever-

• Deadlocking latch

• Latch by inside lever

• Outside lever rigid at all times.

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G15-3 Exit or Communicating Lever Lock

$ 427.00

Sargent 10G15-3 Exit or Communicating Lever Lock

by Sargent

$ 427.00

Quantity

Sargent 10G15-3 Exit or Communicating Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G15-3 Exit or Communicating Lever-

• Deadlocking latch

• Blank rose outside

• Latch by lever inside

• Minimum clearance of 1-1/8" on single doors and 2-1/4" between double doors

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock

from $ 475.00

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock

by Sargent

$ 545.00

Cylinder

Quantity

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key in inside lever

• Key in outside lever retracts latch when outside lever is locked

• Inside lever always operative

• ANSI F88

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G17 Utility, Asylum or Institutional Lever Lock

from $ 475.00

Sargent 10G17 Utility, Asylum or Institutional Lever Lock

by Sargent

$ 545.00

Cylinder

Quantity

Sargent 10G17 Utility, Asylum or Institutional Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G17 Utility, Asylum or Institutional Lever-

• Deadlocking latch

• Both levers rigid at all times

• Latch by key either side

• Use only on rooms with more than one exit

• ANSI F87

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G24 Entrance or Office Lever Lock

from $ 474.00

Sargent 10G24 Entrance or Office Lever Lock

by Sargent

$ 510.00

Cylinder

Quantity

Sargent 10G24 Entrance or Office Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G24 Entrance or Office Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push button in inside lever

• Push button released by key or turning inside lever

• Closing door does not unlock outside lever or release button

• Key in outside lever retracts latch when outside lever is locked and releases inside push button

• ANSI F82

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Sargent 10G26 Store or Storeroom Lever Lock

from $ 475.00

Sargent 10G26 Store or Storeroom Lever Lock

by Sargent

$ 545.00

Cylinder

Quantity

Sargent 10G26 Store or Storeroom Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Sargent 10G26 Store or Storeroom Lever-

• Deadlocking latch

• Latch by either lever

• Key in either lever locks or unlocks both levers

• ANSI F91

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements
7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

Installs in 1 minute or less
Quickly adapts to fit multiple through-bolt positions
User friendly packaging
User friendly instruction sheets
Convenient installation diagram on box

Design

Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Security

Torx® and spanner screws optional
Classroom security and multiple locking functions are available
Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

Certified ANSI A156.2 Series 4000-Grade 1
UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option) Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
All levers conform to ADA requirement for barrier-free accessibility
Levers (L,J & P) conform to California Administrative Code Title 19 and 24
All individual components of a total door opening are required to comply with each code (Hurricane code)
Conforms to national & state fire and handicapped requirements

Flexibility

Fits a variety of door preparations with adaptable through-bolt positioning
Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
6 ADA lever styles to complement a wide array of design applications
Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
11 Architectural grade finishes
21 Functions
SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Filters

Products

910TC Series 12/24 VDC Touchless Actuators, Waving Hand Icon, Black Finish

Product Summary

Product Details

Product Summary

Product Details

Features

Benefit

Specifications

Certifications

Documentation

Catalog

Installation Instructions

Template

Product overview

Product overview

Center Hung Pivot Set, Includes 340 Top Pivot, Satin Chromium Plated

Application• Full Mortise• Handed

Shear Lock

Technical Specifications:

Mini Shear Lock

Technical Specifications:

Mini Maglock

Technical Specifications:

Features

Salsbury 1090 Key Keepers - Recessed Mounted - U.S.P.S. Access

Features

Downloads

• Deadlocking latch

• Latch by lever inside or key outside

• Outside lever rigid at all times

• ANSI F86

Strength, Durability and Security

Convenience

Design

Security

Certification Compliance

Flexibility

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push/turn button in inside lever

• Push button released by key outside or lever inside

• Turn button must be released manually

• Key retracts latch when outside lever is locked

• ANSI F109

Strength, Durability and Security

Convenience

Design

Security

Certification Compliance

Flexibility

• Deadlocking latch

• Latch by inside lever

• Outside lever rigid at all times.

Strength, Durability and Security

Convenience

Design

Security

Certification Compliance

Flexibility

• Deadlocking latch

• Blank rose outside

• Latch by lever inside

• Minimum clearance of 1-1/8" on single doors and 2-1/4" between double doors

Application
• Full Mortise
• Handed