Lcn

LCN 1250 Series Light Duty Door Closer - Barzellock.com
The new LCN Cast Aluminum Series closers were specially designed to deliver consistent, dependable, long-term performance while offering high-quality, effective solutions. The new series of closers features a cast aluminum body, full complement bearing, peel-n-stick templates, and are offered in six available standard finishes, as well as custom colors. The patent-pending LCN design, featuring the industry’s most common hole pattern, is an excellent choice for a wide range of applications.

Applications
1250 Series: Light Duty
  • Designed for low-frequency and low-abusive traffic areas
  • Ideal for aluminum storefronts and interior offices
  • Perfect choice for aftermarket replacement
  • For aluminum, hollow metal, or wood swinging doors and frames
  • Can be used with hinge or pivot mounted door
  • Mounts on a 1 3/4' transom without adapter plates
  • Adapter plates and other installation accessories available for unusual conditions
LCN 1261 Standard RW/PA Arm Door Closer 1260 Series - Barzellock.com
The LCN 1260 Series combines the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with dual mounting capability. The 1260 is adjustable spring sizes 1-5 and mounts to the most common commercial footprint. The 1260 also features a complete line of regular and extra duty arms and LCN's peel-n-stick installation templates.
 
UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one.
 
Features Common to 1000 Series
  • 1000 series closers mount three ways. Closers with regular or hold-open arm mount hinge side or top jamb. Parallel arm, designated with a "P", closers include - 62PA SHOE required for parallel arm mount. 1460T mounts hinge side, top jamb (pull side) and stop face.
  • Non-handed for right and left swinging doors
  • Closers to meet ADA reduced opening for requirements
  • Adjustable hydraulic backcheck cushions opeing swing prior to 90 degrees
  • Separate regulation of general closing speed and latching speed
  • Joints in arm and shoe adapt to uneven trim
  • Reversible shoe to boost latching power on double lever arms
Specifications
  • Standard 1260 series closer shipped with regular arm, a shaft cover, and self reaming and tapping screws. See 1260 Series catalog pages 8-9 for options
  • Non-sized (1-5) cylinder is adjustable for interior doors to 4’6” and exterior doors to 3’6”
  • Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors
  • Mounts to most common commercial footprint (3/4” x 9 1/16”)
  • Closer meets ADA requirements. See 1260 Series catalog page 10
  • Optional Quick Fix™ bracket kit
  • Standard or optional custom powder coat finish
  • Optional SRI primer for installations in corrosive conditions
  • Optional Slim Line cover
LCN 1450 Medium Duty Door Closer

This medium-duty closer is designed to deliver consistent and dependable performance from new construction to aftermarket replacement.

 

Body Construction

  • Cast aluminum cylinder with full-complement bearing
  • 1-1/4” diameter piston
  • Heat-treated steel pinion journal

Quality and Durability

  • All-weather fluid
  • Patent-pending design
  • 25-year warranty

Installation

  • Universal non-handed
  • Peel-n-stick template and standard slim line plastic cover
  • Adjustable spring sizes 1-6
  • Non-handed
  • Adjustable spring sizes 1-6
  • Meets ADA requirements
  • UL and cUL listed
  • Meets BAA (Buy American Act)
  • Tested and certified under ANSI/BHMA A156.4 Grade 1

 

LCN 4040SE-STD Sentronic Door Closer

The 4040SE Sentronic® is a heavy duty, non-handed, nonsized closer/holder designed to provide single point hold-open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Single lever (track) arm closer is specifically designed for interior doors. 

 

4040XP RW/PA
 The 4040XP Is The Most Common Closer Used In
 Schools Malls Office Buildings Hospitals Storefronts

 "Excellent service, excellent price, excellent timing! Huge help in crazy construction business environment! Five stars! Would suggest US Lock Supply to anybody, no doubt about it!" 

 Used By The Following Professionals
 Glass Companies Locksmiths Management / Maintenence Companies Contractors
 Need a different arm?  Hold Open Extra Duty Arm All Arm Options

 

 

 

Here are installation instructions for the 4040xp rw/pa closer

LCN Closer Catalog

Some of the features the 4040 Door Closer includes:

  • Non-handed
  •  Mounts pull side or top jamb with shallow reveal P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting
  • 44% increased bearing load capacity
  • Strongest pinion ever- at 3/4” journal diameter
  • Widest bearing ever- at 5/8”
  • Stronger pinion teeth
  • New V-shield™ seal with 20% longer life
  • XP = eXtra Protection in real world applications
  • Cast Iron
  • Forged Steel Arm
  • Double Heat Treated Steel Pinion
  • All Weather Fluid
  • Non-Handed
  • LCN® Fast™ Power Adjust
  • Fast & Accurate Installation
  • UL & cUL Listed
  • Tested and certified under ANSI Standard A156.4, grade one

Specifications

  • Non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”
  • Closer can mount hinge side, top jamb, or parallel arm (with PA bracket) on either right or left swinging doors
  • Closers to meet ADA requirements
  • Standard or optional custom powder coat finish
  • Optional plated finish on metal cover, arm and fasteners
  • Optional SRI primer for installations in corrosive conditions is available with powder coat only
  • UL and cUL listed for self-closing doors without hold-open
  • 4040XP can be used with all 4040 accessories
LCN 4040XP-3071 Door Closer Body Sold out

LCN 4040XP-3071 Door Closer Body

by LCN
Sold out
$ 279.76
The 4040XP Series is LCN’s most popular door closer—and for good reason. This durable non-handed, surface-mounted heavy-duty closer, is designed for the most demanding high-use-and-abuse applications as well as for easy installation and maintenance. Features 4040XP Series Certifications Grade 1 - ANSI A156.4, UL 10C, ADA, 100 hour salt spray, meets BAA - Buy American Act Body construction § Patented positive stop § Patented regulation valve indicators § Independent speed adjustments § QR code for instructions and support § Cast iron body § Full complement bearing § 1 1 ⁄2" diameter piston § Double heat treated pinion journal Fluid All weather liquid X fluid Handing Non-handed Templating Peel-n-Stick templates - 2 1 ⁄4" x 5" mounting hole pattern Size Adjustable spring size 1-6, includes LCN Green Dial Warranty 30 years Cover § Redesigned snap-fit plastic cover (PC) with improved retention fit, standard § Metal Cover (MC), optional Fasteners Self reaming and tapping screws (SRT) Mounting Hinge (pull side), top jamb (push side), parallel arm (push side) Arms Regular arm Finishes/colors/ powder coat § 622 Matte black § 689 Aluminum § 690 Statuary bronze § 691 Light bronze § 693 Black § 695 Dark bronze § 696 Brass § Custom colors optional § Optional SRI primer - powder coat only § Optional plated finishes
LCN 4111-3071 AL

LCN 4111-3071 AL

by LCN
$ 252.67

Standard Cylinder Assembly, Left Hand, Aluminum

Finish

689/US28
Finish Description Aluminum Painted
Finish Family Matte Silver





Technical Specs
Type Surface
Technology Hydraulic
Mounting Location Push Side
Mounting Style Parallel Arm
Hand LH, RH
Cold Weather Fluid Yes
Product Type Door Closer Parts
LCN 4111-EDA Door Closer

LCN 4111-EDA Door Closer

by LCN
$ 400.40
The 4110 is LCN's best performing heavy duty closer with an adjustable
spring and possible hold open point beyond 140 degrees, meeting ADA
requirements. Backed by a 30 year warranty, the cast iron body and all
weather fluid offer versatility in high traffic applications.
Features
4110 Series
Customized installation templates or products may be available to solve non-standard applications.
Contact LCN Product Support for assistance.
Special
templates
Certifications Grade 1 - ANSI A156.4, UL 10C, ADA, 100 hour
salt spray, meets BAA - Buy American Act
Body
construction
§ Cast iron body
§ Full complement bearing
§ 1 1
⁄2" diameter piston
§ 11⁄16" diameter double heat treated
pinion journal
Fluid All weather fluid
Handing Handed
Templating Peel-n-Stick templates -
2 1
⁄2" x 6" mounting hole pattern
Size Adjustable spring size 1-5, or sized 6, includes
LCN Green Dial
Warranty 30 years
Cover § Plastic Cover (PC), standard
§ Metal Cover (MC), optional
Fasteners Self Reaming and Tapping Screws (SRT)
Mounting Parallel arm (push side)
Arms Extra-duty arm
Finishes/colors/
powder coat
§ 622 Matte black
§ 689 Aluminum
§ 690 Statuary bronze
§ 691 Light bronze
§ 693 Black
§ 695 Dark bronze
§ 696 Brass
§ Custom colors optional
§ Optional SRI primer - powder coat only
§ Optional plated finishes
LCN 6440 Low Energy Module Kit

COMPACT Low Energy Auto Operator Module Kit (Conversion Kit Only), Gearmotor Assembly, Mounting Plate and Screws, Plastic Cover, Power Supply, Door Loop, 30' Copper Wire, Aluminum Painted Finish, Dark Bronze Finish

 

Unit of Measure Each
Application Conversion Kit Only
UL Listing Type UL 10C, 228/325
ANSI Number A156.19, A117.1
Restrictions None
BAA Qualified Yes
Limited Warranty 2 Years
Burglar Rated No
ADA Compliance Yes
Finish
Finish

689/US28, 690
Finish Description Aluminum Painted, Dark Bronze
Finish Family Matte Silver, Dark Bronze





Technical Specs
Type Surface
Technology Electrohydraulic
Mounting Location Push or Pull Side
Mounting Style Tri Mount
Arm Type Double Lever Arm with PA Bracket
Hand Non-Handed
Door Weight 185 lbs
Voltage 2A @ 24VDC
Physically Handicapped Yes
Product Type Door Operators
LCN 8310-3860TW Actuator Package
Actuator Package, Logo, Text, Wireless, 4-1/2" Round
LCN 8310-810 Wave To Open

LCN 8310-810 Wave To Open

by LCN
$ 609.44
Standard Duty Touchless Actuator, Text & Wave Icon, Single or Double, Wave Icon or Wheelchair Icon
LCN 8310-810R Round Wave To Open
Heavy Duty Touchless Actuator, Round, Text & Wave Icon or Text & Wheelchair Icon, Satin Stainless Steel
LCN 8310-813 Wave To Open

LCN 8310-813 Wave To Open

by LCN
$ 447.20
Standard Duty Touchless Actuator, Text & Wave Icon, Black or White, Single, Double or Narrow Gang
LCN 8310-813R Wave To Open

LCN 8310-813R Wave To Open

by LCN
$ 447.20
Standard Duty Touchless Actuator, Round, Text & Wave Icon, Black or White
LCN 8310-815 IP65 Rated Wave To Open
Harsh Conditions Touchless Actuator, IP65 Rated Enclosure, Text & Wave Icon
LCN 8310-844 Transmitter

LCN 8310-844 Transmitter

by LCN
$ 198.64

Transmitter Kit, Wall Mount, 9v

LCN 8310-852 6" Round Actuator

Actuator, Wall Mount, Wireless, 6" Round

LCN 8310-853 Actuator

LCN 8310-853 Actuator

by LCN
$ 255.84
Actuator, Wall Mount, 4-3/4" x 4-3/4"
LCN 8310-854 Sensor

LCN 8310-854 Sensor

by LCN
$ 786.24

Sensor, Header Mount, Activation

LCN 8310-854ERA Cover

LCN 8310-854ERA Cover

by LCN
$ 137.28

Cover, Protective for the 8310-854

LCN 8310-855 Actuator

LCN 8310-855 Actuator

by LCN
$ 404.56
Actuator, Wall Mount, Logo, Dual Vestibule
LCN 8310-856 Actuator

LCN 8310-856 Actuator

by LCN
$ 203.84
Actuator, Wall Mount, Logo
LCN 8310-856T Actuator

LCN 8310-856T Actuator

by LCN
$ 204.88
Actuator, Wall Mount, Logo, Text
LCN 8310-859 Remote

LCN 8310-859 Remote

by LCN
$ 174.72

Remote, Handheld

LCN 8310-865 Wireless Receiver
Receiver, Wireless, 1 Channel, w/Sequencing Feature
LCN 8310-867 4-3/4" Square Box

Box, Surface Mount or Flush Mount 4-3/4" Square

LCN 8310-868 Round Box

LCN 8310-868 Round Box

by LCN
$ 146.64

Box, Surface Mount or Flush Mount 4-1/2" Round

LCN 8310-869 6" Round Box

LCN 8310-869 6" Round Box

by LCN
$ 161.20

Box, Surface Mount or Flush Mount 6" Round

LCN 8310-877 Sensor

LCN 8310-877 Sensor

by LCN
$ 1,499.68
Sensor, Header Mount, Safety
LCN 8310-877S Spacer

LCN 8310-877S Spacer

by LCN
$ 161.20

Spacer, Header Mount for the 8310-877

LCN 9130 Series Benchmark Electromechanical Door Operator Pull Side - Door Closer - Barzellock.com

9130 Series Door Closer by LCN

The LCN 9130 BENCHMARK is an automatic electromechanical swinging door operator for use on hinged, center pivoted and offset pivoted doors. When activated, the Benchmark drives the door to full open position, then electrical power is turned off and the door is closed by spring force. The activating cirucit opens the door from any position in the closing swing. During a power failure, the Benchmark acts as a manual door closer (Size 3). Door opening and closing cycles, including opening speed, back check speed, hold open time delay, closing speed, and latch positon, are adjustable.

The 9130 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail. Designed primarily for automatic opening applications that occasionally require manual opening. The BENCHMARK is a cost-effective solution for retrofitting an activated or manual door.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Microprocessor control box ensures reliability and maintains customer settings.
- Tested internally to over 3,000,000 cycles.
- Power Boost allows for increased closing force near latch.
- Available in Aluminum (ANCLR) finish.

9130 Series is fully compliant with UL325 and meets the provisions of ANSI A156.19. The 9130 Series is UL listed for fire-rated applications. The 9130 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9130 Series operator is shipped with motor gearbox, control box, mounting plate, standard arm, metal cover, standard track, wood and machine screws.
- Single interior door, surface mounted.
- ADA compliant.
- On/Off switch included as standard.
- Non-handed for either right or left swinging door.
- 27" cover is standard. Full length covers available up to 36" for single doors.
- All potentiometers clearly labeled with their functions.
- LED lights indicate power to control box and motor gearbox.

Arm Function Option:

STD (Standard Arm 9130-3077T): Non-handed arm. Track roller not included.

LCN 9140 Series Benchmark Electromechanical Door Operator Push Side  - Door Closer - Barzellock.com

9140 Series Door Closer by LCN

The LCN 9140 BENCHMARK is an automatic electromechanical swinging door operator for use on hinged, center pivoted and offset pivoted doors. When activated, the Benchmark drives the door to full open position, then electrical power is turned off and the door is closed by spring force. The activating circuit opens the door from any position in the closing swing. During a power failure, the Benchmark acts as a manual door closer (Size 3). Door opening and closing cycles, including opening speed, back check speed, hold open time delay, closing speed, and latching position, are adjustable.

The 9140 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail. Designed primarily for automatic opening applications that occasionally require manual opening. The BENCHMARK is a cost-effective solution for retrofitting an activated or manual door.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Microprocessor control box ensures reliability and maintains customer settings.
- Power Boost allows for increased closing force near latch.
- Available in Aluminum (ANCLR) finish.

9140 Series is fully compliant with UL325 and meets the provisions of ANSI A156.19. The 9140 Series is UL listed for fire-rated applications. The 9140 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9140 Series operator is shipped with motor gearbox, control box, mounting plate, regular arm, metal cover, standard track, wood and machine screw pack.
- Single interior door, surface mounted.
- ADA compliant.
- On/Off switch included as standard.
- Non-handed for either right or left swinging door.
- 27" cover is standard. Full length covers available up to 36" for single doors.
- All potentiometers clearly labeled with their functions.
- LED lights indicate power to control box and motor gearbox.

Arm Function Option:

REG (Regular Arm 9140-3077): Non-handed arm.

LCN 9153 Door Operator - Door Closer

9150 Series Door Closer by LCN

The LCN 9150 BENCHMARK is an automatic electromechanical swinging door operator for use on hinged, center pivoted and offset pivoted doors. When activated, the Benchmark drives the door to full open position, then electrical power is turned off and the door is closed by spring force. The activating circuit opens the door from any position in the closing swing. During a power failure, the Benchmark acts as a manual door closer. Door opening and closing cycles, including opening speed, back check speed, hold open time delay, closing speed, and latch position, are adjustable.

The 9150 BENCHMARK by LCN is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail. Designed primarily for automatic opening applications that occasionally require manual opening. The BENCHMARK is a cost-effective solution for retrofitting an activated or manual door.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Microprocessor control box ensures reliability and maintains customer settings.
- Power Boost allows for increased closing force near latch.
- Available in Aluminum (ANCLR) finish.

9150 Series is fully compliant with UL325 and meets the provisions of ANSI A156.19. The 9150 Series is UL listed for fire-rated applications. The 9150 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9150 Series operator is shipped with motor gearboxes, control boxes, mounting plate, regular arms, metal cover, wood and machine screw packs.
- Pair of interior doors, surface mounted.
- ADA compliant.
- On/Off switch included as standard.
- Non-handed for either right or left swinging door.
- 72" cover is standard.
- All potentiometers clearly labeled with their functions.
- LED lights indicate power to control box and motor gearbox.

Arm Function Option:

REG (Regular Arm 9150-3077): Non-handed arm.

9530 Series Door Closer by LCN

LCN automatic operators are the proven standard in schools and health care facilities for over 20 years. They are easily retrofitted into existing doors and frames, as well as new construction. LCN low energy electrohydraulic and pneumatic automatic operators feature a heavy duty closer with a slow opening function. LCN's electromechanical automatic operators utilize a motor gearbox and control box to perform the opening and closing function. LCN's electromechanical products are designed primarily for automatic opening applications that occasionally require manual opening. A control box provides all electrical functions. These self-contained units are suitable for use on single leaf doors or pairs of doors. These products combine all the control and power elements into a single operator package, only some actuators are required to complete the system.

The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Power Boost provides additional latching force.
- Electromechanical unit with microprocessor control.
- Digital keypad for easy setup.
- Meets International Building Code requirements and ANSI A156.19.
- UL approved for fire doors.
- Available in Aluminum (ANCLR) finish.

9530 Series is fully compliant with UL325 & UL1998 and meets the provisions of ANSI A156.19. The 9530 Series is UL listed for fire-rated applications. The 9530 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9530 Series operator is shipped with motor gearbox, control box, standard arm, header, and mounting hardware.
- Single door, surface mounted.
- Meets ADA requirements (power mode only).
- Handed for right (RH or LHR) or left (LH or RHR) swinging doors. Click here for Handing Diagram.
- 36" header length is standard. Specify length 33" to 48" max.
- Adjustable hold open period of 2 to 32 seconds in automatic or manual mode.

Arm Function Option:

STD (Standard Arm 9530-3077T): Handed arm. Track roller not included.

9530 Series Door Closer by LCN

LCN automatic operators are the proven standard in schools and health care facilities for over 20 years. They are easily retrofitted into existing doors and frames, as well as new construction. LCN low energy electrohydraulic and pneumatic automatic operators feature a heavy duty closer with a slow opening function. LCN's electromechanical automatic operators utilize a motor gearbox and control box to perform the opening and closing function. LCN's electromechanical products are designed primarily for automatic opening applications that occasionally require manual opening. A control box provides all electrical functions. These self-contained units are suitable for use on single leaf doors or pairs of doors. These products combine all the control and power elements into a single operator package, only some actuators are required to complete the system.

The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Power Boost provides additional latching force.
- Electromechanical unit with microprocessor control.
- Digital keypad for easy setup.
- Meets International Building Code requirements and ANSI A156.19.
- UL approved for fire doors.
- Available in Aluminum (ANCLR) finish.

9530 Series is fully compliant with UL325 & UL1998 and meets the provisions of ANSI A156.19. The 9530 Series is UL listed for fire-rated applications. The 9530 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9530 Series operator is shipped with motor gearbox, control box, standard arm, header, and mounting hardware.
- Single door, surface mounted.
- Meets ADA requirements (power mode only).
- Handed for right (RH or LHR) or left (LH or RHR) swinging doors. Click here for Handing Diagram.
- 36" header length is standard. Specify length 33" to 48" max.
- Adjustable hold open period of 2 to 32 seconds in automatic or manual mode.

Arm Function Option:

STD (Standard Arm 9530-3077T): Handed arm. Track roller not included.

9540 Series Door Closer by LCN

LCN automatic operators are the proven standard in schools and health care facilities for over 20 years. They are easily retrofitted into existing doors and frames, as well as new construction. LCN low energy electrohydraulic and pneumatic automatic operators feature a heavy duty closer with a slow opening function. LCN's electromechanical automatic operators utilize a motor gearbox and control box to perform the opening and closing function. LCN's electromechanical products are designed primarily for automatic opening applications that occasionally require manual opening. A control box provides all electrical functions. These self-contained units are suitable for use on single leaf doors or pairs of doors. These products combine all the control and power elements into a single operator package, only some actuators are required to complete the system.

The 9540 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.

Features and Benefits:

- Push 'N Go permits non-switch activation.
- Power Boost provides additional latching force.
- Electromechanical unit with microprocessor control.
- Digital keypad for easy setup.
- Meets International Building Code requirements and ANSI A156.19.
- UL approved for fire doors.
- Available in Aluminum (ANCLR) finish.

9540 Series is fully compliant with UL325 & UL1998 and meets the provisions of ANSI A156.19. The 9540 Series is UL listed for fire-rated applications. The 9540 Series also meets the provisions of the Americans with Disabilities Act.

Specifications:

- 9540 Series operator is shipped with motor gearbox, control box, regular arm, header, and mounting hardware.
- Single door, surface mounted.
- Meets ADA requirements (power mode only).
- Handed for right (RH or LHR) or left (LH or RHR) swinging doors. 
- 36" header length is standard. Specify length 33" to 48" max.
- Adjustable hold open period of 2 to 32 seconds in automatic or manual mode.

Arm Function Option:

REG (Regular Arm 9540-3077): Handed arm.