Filters

Commercial Lever Locks | Passage, Privacy, Entry, Dummy & More

 Arrow Corbin Russwin Falcon Hager
S. Parker Sargent Schlage Yale
Sargent 10G37 Classroom Lever Lock - Barzellock.com

Sargent 10G37 Classroom Lever Lock

from $ 474.00
Sargent 10G37 Classroom Lever Lock - Barzellock.com

Sargent 10G37 Classroom Lever Lock

by Sargent
$ 510.00

Sargent 10G37 Classroom Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

  • Sargent 10G37 Classroom Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key

• Key in outside lever locks or unlocks outside lever and retracts latch

• Inside lever always operative

• ANSI F84

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G30 Communicating Lever Lock - Barzellock.com

Sargent 10G30 Communicating Lever Lock

from $ 475.00
Sargent 10G30 Communicating Lever Lock - Barzellock.com

Sargent 10G30 Communicating Lever Lock

by Sargent
$ 545.00

Sargent 10G30 Communicating Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.  

  • Sargent 10G30 Communicating Lever-

• Deadlocking latch

• Latch by either lever

• Key in either lever locks or unlocks its own lever only

• Use only on rooms with more than one exit

• ANSI F80

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G26 Store or Storeroom Lever Lock - Barzellock.com

Sargent 10G26 Store or Storeroom Lever Lock

from $ 475.00
Sargent 10G26 Store or Storeroom Lever Lock - Barzellock.com

Sargent 10G26 Store or Storeroom Lever Lock

by Sargent
$ 545.00

Sargent 10G26 Store or Storeroom Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.  

  • Sargent 10G26 Store or Storeroom Lever-

• Deadlocking latch

• Latch by either lever

• Key in either lever locks or unlocks both levers

• ANSI F91

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G24 Entrance or Office Lever Lock - Barzellock.com

Sargent 10G24 Entrance or Office Lever Lock

from $ 474.00
Sargent 10G24 Entrance or Office Lever Lock - Barzellock.com

Sargent 10G24 Entrance or Office Lever Lock

by Sargent
$ 510.00

Sargent 10G24 Entrance or Office Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

  • Sargent 10G24 Entrance or Office Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push button in inside lever

• Push button released by key or turning inside lever

• Closing door does not unlock outside lever or release button

• Key in outside lever retracts latch when outside lever is locked and releases inside push button

• ANSI F82

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G17 Utility, Asylum or Institutional Lever Lock - Barzellock.com

Sargent 10G17 Utility, Asylum or Institutional Lever Lock

from $ 475.00
Sargent 10G17 Utility, Asylum or Institutional Lever Lock - Barzellock.com

Sargent 10G17 Utility, Asylum or Institutional Lever Lock

by Sargent
$ 545.00

Sargent 10G17 Utility, Asylum or Institutional Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.  

  • Sargent 10G17 Utility, Asylum or Institutional Lever-

• Deadlocking latch

• Both levers rigid at all times

• Latch by key either side

• Use only on rooms with more than one exit

• ANSI F87

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock - Barzellock.com

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock

from $ 475.00
Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock - Barzellock.com

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever Lock

by Sargent
$ 545.00

Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements. 

  • Sargent 10G16 Classroom Security, Apartment, Exit, Privacy Lever-

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key in inside lever

• Key in outside lever retracts latch when outside lever is locked

• Inside lever always operative

• ANSI F88

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G15-3 Exit or Communicating Lever Lock - Barzellock.com

Sargent 10G15-3 Exit or Communicating Lever Lock

$ 427.00
Sargent 10G15-3 Exit or Communicating Lever Lock - Barzellock.com

Sargent 10G15-3 Exit or Communicating Lever Lock

by Sargent
$ 427.00

Sargent 10G15-3 Exit or Communicating Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

  • Sargent 10G15-3 Exit or Communicating  Lever-

• Deadlocking latch

• Blank rose outside

• Latch by lever inside

• Minimum clearance of 1-1/8" on single doors and 2-1/4" between double doors

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G13 Exit Lever Lock - Barzellock.com

Sargent 10G13 Exit Lever Lock

$ 427.00
Sargent 10G13 Exit Lever Lock - Barzellock.com

Sargent 10G13 Exit Lever Lock

by Sargent
$ 427.00

Sargent 10G13 Exit Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

  • Sargent 10G13 Exit Lever-

• Deadlocking latch

• Latch by inside lever

• Outside lever rigid at all times.

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Sargent 10G04 Storeroom or Closet Lever Lock - Barzellock.com

Sargent 10G04 Storeroom or Closet Lever Lock

from $ 444.00
Sargent 10G04 Storeroom or Closet Lever Lock - Barzellock.com

Sargent 10G04 Storeroom or Closet Lever Lock

by Sargent
$ 479.00

Sargent 10G04 Storeroom or Closet Lever. The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

  • Sargent 10G04 Storeroom or Closet Lever-

• Deadlocking latch

• Latch by lever inside or key outside

• Outside lever rigid at all times

• ANSI F86

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

  • Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
  • Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
  • 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

  • Installs in 1 minute or less
  • Quickly adapts to fit multiple through-bolt positions
  • User friendly packaging
  • User friendly instruction sheets
  • Convenient installation diagram on box

Design

  • Solid feel and precise lever action
  • Slim rose design available
  • Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
  • Levers are solid one piece cast construction, except “J” lever

Security

  • Torx® and spanner screws optional
  • Classroom security and multiple locking functions are available
  • Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
  • Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

  • Certified ANSI A156.2 Series 4000-Grade 1
  • UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
  • All levers conform to ADA requirement for barrier-free accessibility
  • Levers (L,J & P) conform to California Administrative Code Title 19 and 24
  • All individual components of a total door opening are required to comply with each code (Hurricane code)
  • Conforms to national & state fire and handicapped requirements

Flexibility

  • Fits a variety of door preparations with adaptable through-bolt positioning
  • Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
  • 6 ADA lever styles to complement a wide array of design applications
  • Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
  • 11 Architectural grade finishes
  • 21 Functions
  • SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

 

Falcon W12 Dummy Lever Lock - Barzellock.com

Falcon W12 Dummy Lever Lock

from $ 50.00
Falcon W12 Dummy Lever Lock - Barzellock.com

Falcon W12 Dummy Lever Lock

by Falcon
$ 50.00
Whether your application is government/military, retail, industrial or multi-family, the W12 Series lock that fits perfectly. In two popular lever and two popular knob styles Falcon can match most commercial door trim.

The Falcon W Series locks feature conventional cylinders and small format interchangeable cores that are compatible with SFIC products from other manufacturers. Our conventional cylinders are available in all Falcon conventional key sections as well as Schlage C Keyway, which we now masterkey across the complete Falcon product line.

If quality product at a value price is what you are looking for, the Falcon W Series is the lock for you. And they’re backed by one of the best names in the business.
 
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon W Series or equal, and meet the following requirements:
• All locks shall meet ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
• Locksets shall be UL listed 3 hour A Label.
• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted.
• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
• Locksets shall adjust to fit door thickness from 1-3/8” to 1-3/4”.
• All locksets shall be non-handed and shall not require field disassembly for re-handing.
• Preparation for door must be non-handed.
• Acceptable manufacturer: Falcon Lock

Specifications
Door Thickness: 1-3/8” to 1-3/4” standard.
Backset: 2-3/4” standard; 2-3/8” also available.
Mechanism: Parts constructed of brass or cold-formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose-mounting assembly, and two screws that screw into the chassis assembly.
Handing: Locks are non-handed.
Cylinder: Pinning in six chambers. Cylinder assemblies removable to re-key. Also available with 6- or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are stainless steel. Two nickel silver keys furnished standard.
Competitor Cylinder: The W Series accepts standard 6-pin cylinders available from Falcon, as well as Schlage, Corbin-Russwin, Yale and Sargent.
Keyways: “G” keyway standard on Falcon standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Schlage “C” keyway also available on standard cylinders, includes master key. Master keying available on all Falcon and Schlage “C” keyways.
Trim: Roses are heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure-cast zinc (solid levers-no-inserts) finished to match mating parts.
Latches: 1/2” bolt projection made of stainless steel and UL listed for 3-hour door assemblies. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2-3/8” backset with 1” x 2-1/4” latch faces or 2-3/4” backset with 1-1/8” x 2-1/4” latch faces.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strikes, sizes and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour A label.
Falcon T521 Office Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T521 Office Lever Lock-D,Q,& A Levers

$ 262.00
Falcon T521 Office Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T521 Office Lever Lock-D,Q,& A Levers

by Falcon
$ 262.00
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.
Office lock—Turn button locking. Turning button locks outside lever requiring use of key until button is manually unlocked. Inside lever always free. Deadlocking latch bolt.
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.
Backset: 2-3/4” standard. 
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.

Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label. and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.
Falcon T511 Entry/Office Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T511 Entry/Office Lever Lock-D,Q,& A Levers

$ 262.00
Falcon T511 Entry/Office Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T511 Entry/Office Lever Lock-D,Q,& A Levers

by Falcon
$ 262.00
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.
Entry/office lock—Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.
Backset: 2-3/4” standard. 
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.

Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label. and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.
Falcon T381 Classroom Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T381 Classroom Lever Lock-D,Q,& A Levers

$ 304.00
Falcon T381 Classroom Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T381 Classroom Lever Lock-D,Q,& A Levers

by Falcon
$ 304.00
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.
Classroom security lock—Deadlocking latch bolt by levers from either side except when outside lever is locked by key from inside. Outside key only retracts latch. Outside lever is locked and unlocked only by inside key
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.
Backset: 2-3/4” standard. 
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.

Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label. and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.
Falcon T301 Privacy Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T301 Privacy Lever Lock-D,Q,& A Levers

$ 235.00
Falcon T301 Privacy Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T301 Privacy Lever Lock-D,Q,& A Levers

by Falcon
$ 235.00
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.

Privacy lock—Latch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door.

Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.
Backset: 2-3/4” standard. 
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.

Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label. and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.
Falcon T12 Dummy Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T12 Dummy Lever Lock-D,Q,& A Levers

from $ 81.00
Falcon T12 Dummy Lever Lock-D,Q,& A Levers - Barzellock.com

Falcon T12 Dummy Lever Lock-D,Q,& A Levers

by Falcon
$ 81.00
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.
Dummy trim—Single trim-surface mounted rigid lever.
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
• All locksets shall be non-handed and not require field disassembly for re-handing.
• Preparation for door must be non-handed.
Acceptable manufacturer: FALCON LOCK

Specifications
Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.
Backset: 2-3/4” standard. 
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.
Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
Electrified Functions: Available in 24 VDC .185 AMP.

Certifications
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: 3 hour A label. and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.
Falcon B561 Classroom Lever Lock - Barzellock.com

Falcon B561 Classroom Lever Lock

$ 127.00
Falcon B561 Classroom Lever Lock - Barzellock.com

Falcon B561 Classroom Lever Lock

by Falcon
$ 127.00
When you need a tough, reliable lock for a government/military, retail, industrial or multi-family project, you need a Falcon B561-Series lock. Our full line of Grade 2 locksets are a perfect replacement for existing locks, or a smart spec in new construction. With upgraded finishes these locks deliver style as well as strength. Falcon B-Series locks feature an interchangeable core that can be removed for quick, easy re-keying, and are compatible with SFIC products from other manufacturers. Most important, they’re backed by one of the best names in the business.
Classroom lock—Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.
Features and Benefits
Key-in-lever cylindrical locksets shall be Falcon B Series or equal and meet the following requirements:
  • All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.
  • Locksets shall be UL Listed 3-hour, A Label.
  • Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and resistance to loosening.
  • Roses shall be 3-1/2” diameter.
  • All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.
  • Locksets shall adjust to fit door thickness from 1 3/8” to 2”.
  • All locksets shall be non-handed and not require field disassembly for re-handing.
  • Preparation for door must be non-handed.

Specifications
Door Thickness: 1 3/8” to 2” standard.
Backset: 2 3/4” standard. 2 3/8” also available.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.
Handing: Locks are non-handed.
Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.
Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.
Keyways: “C” keyway standard on standard cylinders. Also available with some optional keyways.
Trim: Roses are 3 1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts.
Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2 3/8” backset with 2 1/4” x 1” latchfaces, 2 3/4” backset with 2 1/4” x 1 1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.
Strikes: 4 7/8” x 1 1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.
Screws: Furnished with combination screws for use in wood or metal doors and frames.
ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.
UL: 3-hour, A Label.

Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever - Barzellock.com

Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever

$ 220.00
Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever - Barzellock.com
Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever - Barzellock.com
Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever - Barzellock.com
Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever - Barzellock.com

Corbin Russwin CL3855 Extra Heavy-Duty Commercial Classroom Lever

by Corbin Russwin
$ 220.00

CL3800 Series Is an economical, Grade 2 standard-duty lever lockset which provides an outstanding combination of value and performance. It’s the ideal lever lockset for standard commercial applications. When used in conjunction with the CL3300 Series Extra Heavy-Duty Grade 1 and the CL3500 Series Heavy-Duty Grade 1 Cylindrical Lever Locksets, the overall cost of many projects may be reduced without compromising functionality and durability.

Typical applications

  • Interior offices
  • Closets
  • Multi-family housing
  • Restaurants
  • Retail complexes

• Deadlocking latchbolt by lever either side except when key outside locks outside lever. (Lever handle is free-wheeling in locked position.)

• Outside lever unlocked by key outside.

• Inside lever always free.

Advantages

  • Lever Release™ for vandal resistance
  • Solid cast levers
  • ANSI Grade 2 certification
  • UL 3-hour fire rating
  • Independent lever return springs
  • Through-bolts on door for solid attachment
  • Covers ANSI/DHI door prep A115.18 - 1994 “Spider Cut Out”
Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com

Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever

$ 405.00
Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com

Corbin Russwin CL3557 Extra Heavy-Duty Commercial Storeroom Lever

by Corbin Russwin
$ 405.00

A heavy-duty Grade 1 lever lockset, ideal for commercial, institutional and multifamily applications such as:

  • Interior offices 
  • Apartment complexes
  • Convalescent and elderly care facilities
  • Hotels
  • Restaurants
  • Retail centers

 • Deadlocking latchbolt by key in outside lever or by rotating inside lever.

• Outside lever always rigid.

• Inside lever always free

Advantages

  • Non-handed
  • Solid cast levers
  • Independent return springs to prevent lever sag
  • Through-bolted cylindrical chassis prevents rotation and ensures proper alignment
  • ANSI Grade 1 certification
  • Trim and keying compatible with other Corbin Russwin locksets
Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever - Barzellock.com

Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever

$ 370.00
Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever - Barzellock.com
Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever - Barzellock.com
Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever - Barzellock.com
Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever - Barzellock.com

Corbin Russwin CL3520 Extra Heavy-Duty Commercial Privacy Lever

by Corbin Russwin
$ 370.00

A heavy-duty Grade 1 lever lockset, ideal for commercial, institutional and multifamily applications such as:

  • Interior offices 
  • Apartment complexes
  • Convalescent and elderly care facilities
  • Hotels
  • Restaurants
  • Retail centers

• Throw-off latchbolt by lever either side.

• Outside lever locked by push button.

• Outside lever unlocked by emergency release tool outside, by rotating lever or by closing door.

• Inside lever always free.

Advantages

  • Non-handed
  • Solid cast levers
  • Independent return springs to prevent lever sag
  • Through-bolted cylindrical chassis prevents rotation and ensures proper alignment
  • ANSI Grade 1 certification
  • Trim and keying compatible with other Corbin Russwin locksets
Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever - Barzellock.com

Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever

$ 345.00
Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever - Barzellock.com
Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever - Barzellock.com
Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever - Barzellock.com
Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever - Barzellock.com

Corbin Russwin CL3510 Extra Heavy-Duty Commercial Passage/Closet Lever

by Corbin Russwin
$ 345.00

A heavy-duty Grade 1 lever lockset, ideal for commercial, institutional and multifamily applications such as:

  • Interior offices 
  • Apartment complexes
  • Convalescent and elderly care facilities
  • Hotels
  • Restaurants
  • Retail centers

• Latchbolt by lever either side.

• Both levers always free.

Advantages

  • Non-handed
  • Solid cast levers
  • Independent return springs to prevent lever sag
  • Through-bolted cylindrical chassis prevents rotation and ensures proper alignment
  • ANSI Grade 1 certification
  • Trim and keying compatible with other Corbin Russwin locksets
Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com

Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever

$ 451.00
Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com
Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever - Barzellock.com

Corbin Russwin CL3357 Extra Heavy-Duty Commercial Storeroom Lever

by Corbin Russwin
$ 451.00

The CL3300 series is a Grade 1 cylindrical lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes and four lever designs, the CL3300 series subtly complements any high-use commercial, industrial and institutional application.

• Deadlocking latchbolt by key in outside lever or by rotating inside lever. (Lever handle is freewheeling in locked position.)

• Inside lever always free.

Vandal Resistance

Engineered to meet today’s increased security needs, the CL3300 series offers several advantages. All functions feature the Lever Release™ design for vandal resistance, allowing the outside lever to rotate when in the locked position. All CL3300 series locksets, including the CL33900 series, are available with Corbin Russwin Pyramid patented security or high security cylinders, the most secure locking system available. Pyramid is especially recommende

 

d for installations that require superior protection against picking, drilling and other surreptitious entry. See the Pyramid catalog for additional information.

Access Control

 

For access control, the CL33900 Series Electrified Cylindrical lockset utilizes the proven CL3300 series lockset and
features an integral continuous duty solenoid that allows installation in a standard cylindrical prep. Available in Fail Safe or Fail Secure, the CL33900 is ideal for door control where increased security is necessary at all times, while meeting life safety codes.

Key Advantages

  • EZ-Install components significantly reduce installation time
  • Lever Release™ lever design for vandal resistance
  • Pyramid cylinders for increased security
  • Access control available with CL33900 Electrified lockset
  • ElectroLynx® connectors are standard on all Corbin Russwin electrified products. McKinney QC hinges are recommended to make a complete plug and play application.
  • Independent return springs prevent lever sag
  • Covers ANSI/DHI Door Prep A115.18
Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever - Barzellock.com

Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever

$ 350.00
Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever - Barzellock.com
Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever - Barzellock.com
Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever - Barzellock.com
Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever - Barzellock.com

Corbin Russwin CL3310 Extra Heavy-Duty Commercial Passage Lever

by Corbin Russwin
$ 350.00

The CL3300 series is a Grade 1 cylindrical lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes and four lever designs, the CL3300 series subtly complements any high-use commercial, industrial and institutional application.

• Latchbolt by lever either side.

• Both levers always free.

Vandal Resistance

Engineered to meet today’s increased security needs, the CL3300 series offers several advantages. All functions feature the Lever Release™ design for vandal resistance, allowing the outside lever to rotate when in the locked position. All CL3300 series locksets, including the CL33900 series, are available with Corbin Russwin Pyramid patented security or high security cylinders, the most secure locking system available. Pyramid is especially recommende

 

d for installations that require superior protection against picking, drilling and other surreptitious entry. See the Pyramid catalog for additional information.

Access Control

 

For access control, the CL33900 Series Electrified Cylindrical lockset utilizes the proven CL3300 series lockset and
features an integral continuous duty solenoid that allows installation in a standard cylindrical prep. Available in Fail Safe or Fail Secure, the CL33900 is ideal for door control where increased security is necessary at all times, while meeting life safety codes.

Key Advantages

  • EZ-Install components significantly reduce installation time
  • Lever Release™ lever design for vandal resistance
  • Pyramid cylinders for increased security
  • Access control available with CL33900 Electrified lockset
  • ElectroLynx® connectors are standard on all Corbin Russwin electrified products. McKinney QC hinges are recommended to make a complete plug and play application.
  • Independent return springs prevent lever sag
  • Covers ANSI/DHI Door Prep A115.18
Arrow RL17 Classroom - Barzellock.com

Arrow RL17 Classroom

from $ 72.00
Arrow RL17 Classroom - Barzellock.com

Arrow RL17 Classroom

by Arrow
$ 72.00
The RL Series cylindrical locksets are an economical value for a variety of application. Perfect for multi-family housing markets, as well as light commercial applications. This product is now available in either standard or IC core versions and both are supplied with removable thru-bolts.*
Certification:
The RL Series has been designed to meet the requirements of ANSI, A156.2, Series 4000, Grade 2 UL Listed for use on 3 hour, A label single swinging doors. RL Levers conform to ADA requirements.
ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.
Construction: Cold rolled steel with zinc dichromate finish for corrosion resistance. Requires standard 2-1/8" (53.97mm) bore through door.
Backset: 2-3/8" (60.31mm) or 2-3/4" (69.85mm)
Door Thickness: Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors standard.
Latch: Brass 1/2" (12.7mm) throw, UL Listed, guarded latchbolt on all locking functions
Latch Front: 1" x 2-1/4" (25.40mm x 57.15mm) for 2-3/8" backset (60.32.mm) or 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
Exposed Trim: RL Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length. RL Roses are wrought brass 3-3/8" (85.73mm) diameter. Total projection from face of door is 2-1/2" (63.5mm).
Strike: 4-7/8" ANSI (123.83mm), 2-3/4" (69.85mm) T strike, or 2-1/4" (57.15mm) full lip strike.
Cylinder: Conventional - Solid brass 6 pin. Arrow "A" keyway standard. C keyway optional. Interchangeable Core – Lockset prepared to use with 6 or 7 pin interchangeable core. Will accept cores manufactured by Arrow, Best, Falcon, Medeco Keymark, ASSA, and others.*
Keys: 2 brass keys
Handing: Non-handed
Finishes: US3, US4, US10, US10B, US26 and US26D
Thru-bolts: Removable thru-bolts standard on RL Series
Packaging: 10 per case
Warranty: Five Year Mechanical Warranty
Arrow RL08 Single Dummy - Barzellock.com

Arrow RL08 Single Dummy

from $ 23.00
Arrow RL08 Single Dummy - Barzellock.com

Arrow RL08 Single Dummy

by Arrow
$ 23.00
The RL Series cylindrical locksets are an economical value for a variety of application. Perfect for multi-family housing markets, as well as light commercial applications. This product is now available in either standard or IC core versions and both are supplied with removable thru-bolts.*
Certification:
The RL Series has been designed to meet the requirements of ANSI, A156.2, Series 4000, Grade 2 UL Listed for use on 3 hour, A label single swinging doors. RL Levers conform to ADA requirements.
ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.
Construction: Cold rolled steel with zinc dichromate finish for corrosion resistance. Requires standard 2-1/8" (53.97mm) bore through door.
Backset: 2-3/8" (60.31mm) or 2-3/4" (69.85mm)
Door Thickness: Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors standard.
Latch: Brass 1/2" (12.7mm) throw, UL Listed, guarded latchbolt on all locking functions
Latch Front: 1" x 2-1/4" (25.40mm x 57.15mm) for 2-3/8" backset (60.32.mm) or 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
Exposed Trim: RL Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length. RL Roses are wrought brass 3-3/8" (85.73mm) diameter. Total projection from face of door is 2-1/2" (63.5mm).
Strike: 4-7/8" ANSI (123.83mm), 2-3/4" (69.85mm) T strike, or 2-1/4" (57.15mm) full lip strike.
Cylinder: Conventional - Solid brass 6 pin. Arrow "A" keyway standard. C keyway optional. Interchangeable Core – Lockset prepared to use with 6 or 7 pin interchangeable core. Will accept cores manufactured by Arrow, Best, Falcon, Medeco Keymark, ASSA, and others.*
Keys: 2 brass keys
Handing: Non-handed
Finishes: US3, US4, US10, US10B, US26 and US26D
Thru-bolts: Removable thru-bolts standard on RL Series
Packaging: 10 per case
Warranty: Five Year Mechanical Warranty
Arrow QL11 Storeroom Set 26D - Barzellock.com

Arrow QL11 Storeroom Set 26D

from $ 296.00
Arrow QL11 Storeroom Set 26D - Barzellock.com

Arrow QL11 Storeroom Set 26D

by Arrow
$ 296.00
Arrow’s Q Series Grade 1 cylindrical lever locks have been engineered for years of dependable operation. The Q combines flexible installation with the optional OverDrive™ freewheeling feature for use in the widest possible range of applications.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1 Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface
ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs. Lock Chassis: Cold rolled steel, with zinc dichromated finish for rust resistance. Latch retractor is precision cast steel. Extra long bearing sleeve offers added support for interlocking tubes and provides for extra lever rigidity. Requires standard 2-1/8" (53.97mm) bore through door.
Thru-Bolts: Patented flexible adaptor, an eight sided nickel steel alloy mechanism allows for universal thru-bolt location according to door preparation. The flexible mounting is accomplished without manually removing screw posts from rose insert. The flexible adaptor also engages directly with springs, which will virtually eliminate lever sag.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees. Additional 40% spring power in rose insert on OverDrive™ side of door ensures that lever handle returns to horizontal position. (Optional)
Backset: 2-3/4" (69.85mm) standard. 3-3/4" (95.25mm) and 5" (127mm) available.
Latch: Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
Latch Front: Brass, bronze or stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm) beveled, 1/8" (3.175mm) in 2" (50.8mm).
Exposed Trim: Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
Rose Inserts: Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation.
Strikes: Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard. Optional 2-3/4" (69.85mm) x 1-1/8" (28.57mm) strike available. All strikes have 1-1/4" (31.75mm) lip to center dimension.
Door Thickness: 1-3/4" (44.45mm) to 2" (50.80mm) standard.
Handing: Non-handed. Levers operate bi-directionally.
Packaging: 1 per box, 10 per case.
Cylinder Options: Interchangeable core/flex-core – lockset prepared for use with 6 or 7 pin interchangeable core. Supplied less core, but packed with 6 and 7 pin tailpieces. Will accept cores manufactured by Best™, Falcon™, Medeco Keymark™ and others. Suffix “IC” to design. Temporary Arrow construction cores are also available. Also available with cylinder meeting UL437 for pick and drill resistance.
Finish: US3,US4,US10,US10B,US26,US26D. Consult factory for the availability of other non-listed finishes.
Arrow QL02 Privacy Set 26D - Barzellock.com

Arrow QL02 Privacy Set 26D

$ 273.00
Arrow QL02 Privacy Set 26D - Barzellock.com

Arrow QL02 Privacy Set 26D

by Arrow
$ 273.00
Arrow’s Q Series Grade 1 cylindrical lever locks have been engineered for years of dependable operation. The Q combines flexible installation with the optional OverDrive™ freewheeling feature for use in the widest possible range of applications.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1 Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface
ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs. Lock Chassis: Cold rolled steel, with zinc dichromated finish for rust resistance. Latch retractor is precision cast steel. Extra long bearing sleeve offers added support for interlocking tubes and provides for extra lever rigidity. Requires standard 2-1/8" (53.97mm) bore through door.
Thru-Bolts: Patented flexible adaptor, an eight sided nickel steel alloy mechanism allows for universal thru-bolt location according to door preparation. The flexible mounting is accomplished without manually removing screw posts from rose insert. The flexible adaptor also engages directly with springs, which will virtually eliminate lever sag.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees. Additional 40% spring power in rose insert on OverDrive™ side of door ensures that lever handle returns to horizontal position. (Optional)
Backset: 2-3/4" (69.85mm) standard. 3-3/4" (95.25mm) and 5" (127mm) available.
Latch: Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
Latch Front: Brass, bronze or stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm) beveled, 1/8" (3.175mm) in 2" (50.8mm).
Exposed Trim: Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
Rose Inserts: Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation.
Strikes: Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard. Optional 2-3/4" (69.85mm) x 1-1/8" (28.57mm) strike available. All strikes have 1-1/4" (31.75mm) lip to center dimension.
Door Thickness: 1-3/4" (44.45mm) to 2" (50.80mm) standard.
Handing: Non-handed. Levers operate bi-directionally.
Packaging: 1 per box, 10 per case.
Cylinder Options: Interchangeable core/flex-core – lockset prepared for use with 6 or 7 pin interchangeable core. Supplied less core, but packed with 6 and 7 pin tailpieces. Will accept cores manufactured by Best™, Falcon™, Medeco Keymark™ and others. Suffix “IC” to design. Temporary Arrow construction cores are also available. Also available with cylinder meeting UL437 for pick and drill resistance.
Finish: US3,US4,US10,US10B,US26,US26D. Consult factory for the availability of other non-listed finishes.
Arrow QL01 Passage Set 26D - Barzellock.com

Arrow QL01 Passage Set 26D

$ 225.00
Arrow QL01 Passage Set 26D - Barzellock.com

Arrow QL01 Passage Set 26D

by Arrow
$ 225.00
Arrow’s QL Series Grade 1 cylindrical lever locks have been engineered for years of dependable operation. The Q combines flexible installation with the optional OverDrive™ freewheeling feature for use in the widest possible range of applications.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1 Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface
ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs. Lock Chassis: Cold rolled steel, with zinc dichromated finish for rust resistance. Latch retractor is precision cast steel. Extra long bearing sleeve offers added support for interlocking tubes and provides for extra lever rigidity. Requires standard 2-1/8" (53.97mm) bore through door.
Thru-Bolts: Patented flexible adaptor, an eight sided nickel steel alloy mechanism allows for universal thru-bolt location according to door preparation. The flexible mounting is accomplished without manually removing screw posts from rose insert. The flexible adaptor also engages directly with springs, which will virtually eliminate lever sag.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees. Additional 40% spring power in rose insert on OverDrive™ side of door ensures that lever handle returns to horizontal position. (Optional)
Backset: 2-3/4" (69.85mm) standard. 3-3/4" (95.25mm) and 5" (127mm) available.
Latch: Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
Latch Front: Brass, bronze or stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm) beveled, 1/8" (3.175mm) in 2" (50.8mm).
Exposed Trim: Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
Rose Inserts: Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation.
Strikes: Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard. Optional 2-3/4" (69.85mm) x 1-1/8" (28.57mm) strike available. All strikes have 1-1/4" (31.75mm) lip to center dimension.
Door Thickness: 1-3/4" (44.45mm) to 2" (50.80mm) standard.
Handing: Non-handed. Levers operate bi-directionally.
Packaging: 1 per box, 10 per case.
Cylinder Options: Interchangeable core/flex-core – lockset prepared for use with 6 or 7 pin interchangeable core. Supplied less core, but packed with 6 and 7 pin tailpieces. Will accept cores manufactured by Best™, Falcon™, Medeco Keymark™ and others. Suffix “IC” to design. Temporary Arrow construction cores are also available. Also available with cylinder meeting UL437 for pick and drill resistance.
Finish: US3,US4,US10,US10B,US26,US26D. Consult factory for the availability of other non-listed finishes.
Arrow MLX08 - Single Dummy Lever - Barzellock.com

Arrow MLX08 - Single Dummy Lever

$ 29.00
Arrow MLX08 - Single Dummy Lever - Barzellock.com

Arrow MLX08 - Single Dummy Lever

by Arrow
$ 29.00

Arrow’s MLX Series cylindrical lever locks are BHMA Grade 2 Certified, ANSI/BHMA A156.2, Series 4000, while Arrow’s QL Series is BHMA Grade 1 Certified, ANSI/BHMA A156.2, Series 4000. Both lever locks are U.L and c.U.L listed for use on 3 hour, ‘A’ label or lesser doors and meet American with Disabilities Act requirements while also having a 10-year mechanical warranty for ultimate customer satisfaction.

Features:

Door Preparation – Requires standard 2-1/8" (53.97mm) bore through door.
Backset – 2-3/4" (69.85mm)
Door Thickness – Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors standard.
Latch – Stainless Steel 1/2" (12.7mm) throw, UL Listed, guarded latchbolt on all locking functions
Latch Front – 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
Warranty – Ten Year Warranty
Handing – Non-handed
Packaging – 6 per case
Strike – 4-7/8" ANSI (123.83mm)
Cylinder – Solid brass 6 pin, Arrow AR and Schlage CS Keyway, keyed different
Keys – 2 brass keys
Available in SFIC
Freewheeling Lever

Arrow GL97 Intruder Classroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL97 Intruder Classroom Function Set 26D Satin Chrome

$ 200.00
Arrow GL97 Intruder Classroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL97 Intruder Classroom Function Set 26D Satin Chrome

by Arrow
$ 200.00
Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1
Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
Federal Specification FF-H-106C
ANSI A117.1 Accessibility Code
California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.
Housings : Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL. Requires standard 2-1/8" (53.97mm) bore through door.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
Backset: 2-3/4" (69.85mm) standard.
Door Thickness: 1-3/8" (34.92mm) to 2" (50.8mm).
Latch: Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required. Additional latch information below:
Arrow # Backset Type Size
GL71 2-3/4" Guarded 1-1/8"
GL73 2-3/4" Unguarded 1-1/8"
GL70* 2-3/8" Guarded 1"
GL72* 2-3/8" Unguarded 1"
GL81* 3-3/4" Guarded 1-1/8"
GL83* 3-3/4" Unguarded 1-1/8"
GL91* 5" Guarded 1-1/8"
GL93* 5" Unguarded 1-1/8"
Arrow GL87 Classroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL87 Classroom Function Set 26D Satin Chrome

$ 163.00
Arrow GL87 Classroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL87 Classroom Function Set 26D Satin Chrome

by Arrow
$ 163.00
Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1
Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
Federal Specification FF-H-106C
ANSI A117.1 Accessibility Code
California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.
Housings : Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL. Requires standard 2-1/8" (53.97mm) bore through door.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
Backset: 2-3/4" (69.85mm) standard.
Door Thickness: 1-3/8" (34.92mm) to 2" (50.8mm).
Latch: Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required. Additional latch information below:
Arrow # Backset Type Size
GL71 2-3/4" Guarded 1-1/8"
GL73 2-3/4" Unguarded 1-1/8"
GL70* 2-3/8" Guarded 1"
GL72* 2-3/8" Unguarded 1"
GL81* 3-3/4" Guarded 1-1/8"
GL83* 3-3/4" Unguarded 1-1/8"
GL91* 5" Guarded 1-1/8"
GL93* 5" Unguarded 1-1/8"
Arrow GL82 Storeroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL82 Storeroom Function Set 26D Satin Chrome

$ 163.00
Arrow GL82 Storeroom Function Set 26D Satin Chrome - Barzellock.com

Arrow GL82 Storeroom Function Set 26D Satin Chrome

by Arrow
$ 163.00
Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.
Certification
ANSI/BHMA A156.2, Series 4000, Grade 1
Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
Federal Specification FF-H-106C
ANSI A117.1 Accessibility Code
California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.
Housings : Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL. Requires standard 2-1/8" (53.97mm) bore through door.
OverDrive™: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
Backset: 2-3/4" (69.85mm) standard.
Door Thickness: 1-3/8" (34.92mm) to 2" (50.8mm).
Latch: Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required. Additional latch information below:
Arrow # Backset Type Size
GL71 2-3/4" Guarded 1-1/8"
GL73 2-3/4" Unguarded 1-1/8"
GL70* 2-3/8" Guarded 1"
GL72* 2-3/8" Unguarded 1"
GL81* 3-3/4" Guarded 1-1/8"
GL83* 3-3/4" Unguarded 1-1/8"
GL91* 5" Guarded 1-1/8"
GL93* 5" Unguarded 1-1/8"