"Push to Exit" Pushbutton, for use with XMS Motion Sensor, Narrow Stile, Stainless Steel

Product Features

• Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
• Mounted next to door
• Momentarily pressing the button releases door for 30 seconds
• Retriggerable
• Single Gang or Narrow Stile
• SPDT 3 Amp wet N/C contacts
• Operates on 12 or 24 VDC (must be same voltage as the installed lock)
• For indoor use only
• EEB2 includes switchable green, red and blue ADA lenses
• EEB3N includes switchable green and red lenses
• UL Listed

Models

Note: The red and white wires from the EEB2/3N must receive voltage from the same power supply.

Weather Option: WCC and WBB available for all Single Gang Push Buttons, Keyswitches and Keypads.

Safety Notice: Securitron's UL294 certification indicates that when the EEB is used with the XMS Motion Sensor, it meets the NFPA Life Safety Code 101 requirements for exit of access controlled egress doors.

"Push to Exit" Pushbutton, for use with XMS Motion Sensor, Narrow Stile, Stainless Steel

Product Features

• Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
• Mounted next to door
• Momentarily pressing the button releases door for 30 seconds
• Retriggerable
• Single Gang or Narrow Stile
• SPDT 3 Amp wet N/C contacts
• Operates on 12 or 24 VDC (must be same voltage as the installed lock)
• For indoor use only
• EEB2 includes switchable green, red and blue ADA lenses
• EEB3N includes switchable green and red lenses
• UL Listed

Models

Note: The red and white wires from the EEB2/3N must receive voltage from the same power supply.

Weather Option: WCC and WBB available for all Single Gang Push Buttons, Keyswitches and Keypads.

Safety Notice: Securitron's UL294 certification indicates that when the EEB is used with the XMS Motion Sensor, it meets the NFPA Life Safety Code 101 requirements for exit of access controlled egress doors.

Electromechanical Gate Lock, Standard Fail Locked, 12/24VDC, Applied

Description

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2,000 lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding vehicle, pedestrian, or stock gate access control. 2,000 lbs holding force, operates under preload up to 100 lbs. Automatic dual-voltage, no field adjustment required. Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override, cylinder not included. Self-aligning receiver (+/- 1/2″horizontally) helps compensate for gate misalignment and sag. Tamper resistant cast housing. Optional latch status monitor.Surface mount. Operating temperature -58 to +167F [-50 to +75C] Indoor or outdoor use. Use flex mount kit for fast profesional installation.

Model 32 Magnalock, 600lb Holding Force, 12/24VDC, Satin Stainless Steel

Shear Lock, 1200lb Holding Force, 12/24VDC, Satin Stainless Steel