Von Duprin 9827EO/9927EO Surface Mounted Vertical Rod Touch Bar Exit Device
Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9827 device has a smooth mechanism case and the 9927 device has a grooved case. The surface vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors.
The 9827/9927 devices are available in the following finishes: US3, US4, US1 0, US26, US26D, US28 and 313AN. US32D available with 98 Series only.
- Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
- Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
- Strikes: Top - 299 – Dull Black, Bottom – 248L4 & 304L - Unfinished; Optional Strikes available
- Dogging Feature: Hex key dogging standard
- Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
- Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; QEL Quiet Electric Latch Retraction; PN Pneumatic Latch Retraction; LBR Less Bottom Rod
- Mechanical Options: GBK Glass Bead Kit; PL Pullman Latch; WS Tornado and Hurricane Tested
- Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal or Wood Doors, and 325 SNB for top & bottom latch. Optional 425 SNB available
- Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw
- Device Centerline from Finished Floor: 39-5/8" (1006 mm);
- Door Undercut 1/4" (7mm)
- Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
- Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
- Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm)
- Vertical Rods: 1/2" square tubing, standard rods accommodate 7’ (2134mm) door; Top rod length is 34-15/16" (887mm); Bottom rod length is 31-1/2" (794mm); Extension rods available, 1’ (205mm) or 3’ (914mm) for doors over 7’ "F"; One piece top rod available for 8’ (2438mm) and 10’ (3048mm) door
- Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)