Norton 7500 Door Closer

SKU: 7500 613E
Regular price $ 890.00

Product overview
Features
Cast aluminum body

Adjustable, heavy-duty spring sizes 1-6

Tri-packed

Exceeds 25 million cycles

Larger 1-1/2" (38mm) diameter piston

Non-handed

Projection: 2-1/8"

Interior or exterior doors

Staked valves

All standard arm applications allow doors to swing 180, conditions permitting

Hold open, heavy-duty, and low profile arms available

Slide track - push or pull side mounting

Standard, separate and independent latch, sweep, and backcheck intensity valves

Retrofit plates, drop plates, back plates, mounting plates, brackets available

Available fasteners: sex nuts, thru-bolt grommet nuts, Torx®

Benefits
Constructed with robust materials and internal components

One package covers regular, top jamb, and parallel arm mounting

Stringent testing supports a long-life of reliability

Low profile projection provides clean aesthetic

Arm configurations meet broad range of applications

Staking limits ability to accidentally back out the valve while adjusting closer

Extensive offering of accessories to assist with the most difficult applications

Proprietary lubricate delivers optimal performance and efficiency

Specifications
Closer Type: Surface
Maximum Door Weight: 250 lbs
Traffic Rating: High Traffic
Warranty: 30-year limited warranty
Certifications
ANSI/BHMA A117.1

ANSI/BHMA A156.4, Grade 1

Americans with Disabilities Act (ADA) Compliant

Buy American Act*

*Domestic Sourcing regulations vary greatly within Federal, state and local government agencies and therefore certain restrictions may apply. Please contact BAACompliance.Americas@assaabloy.com for additional information.

Environmental Product Declaration (EPD)

Health Product Declaration (HPD)

UL 10C Positive Pressure up to 3 hours

UL-cUL Listed

Model Mounting Type Description Image

7500

Regular Arm

  • Only pull side application where double lever arm is used
  • Most common mounting, providing the greatest closing efficiency
View

7500

Parallel Arm

  • Provides the most appealing appearance for a surface-mounted door closer with a double lever arm
  • Very little or no hardware projecting beyond the frame face, when in closed position, in most situations
View

7500

Top Jamb

  • For efficiency purposes, this application provides the best alternative to the regular arm
  • Requires a top rail on the door of just 2-1/8" (54mm)
  • Provides the best control for doors in exterior walls that swing out of a building
View

7500ST

Pull side slide track

  • Provides the smoothest lines available in a surface mounted door closer
  • Adjustable 85° to 110°
View

7540ST

Low profile pull side slide track

  • Provides the smoothest lines available in a surface mounted door closer
  • Features narrow, slim track
  • Adjustable 85° to 110°
View

7580

Low Profile, Regular Arm

  • Reduced height elbow joint and straight main arm
  • Allows closer to be installed where there is as little as 1" of frame face or ceiling clearance
View

CLP7500

CloserPlus® arm

  • Arm incorporates a stop at the arm's soffit plate to dead stop the door at a predetermined degree of door swing between 85° and 110°, in 5° increments
  • Prior to dead stop the door closer's backcheck feature slows the door speed to reduce the impact of the stop action
  • Intended for use where an auxiliary door stop cannot be used and no more than moderate abuse is anticipated
View

CLP7500R

CloserPlus Ramp™ arm

  • Ramp and plunger design that easily slides into place reducing wear
  • Ideal for applications where the door will constantly be pulled out of hold open
View

CPS7500

CloserPlus Spring™ arm

  • Arm incorporates a stop at the arm's soffit plate to dead stop the door at a predetermined degree of door swing between 85° and 110°, in 5° increments
  • An additional steel buffer spring prvides greater protection at the end of the door opening cycle
View

P7580

Low Profile, Parallel Arm

  • Reduced height elbow joint and straight main arm
  • Allows closer to be installed 1/2" higher up on door that standard parallel arms
View

PR7500

Parallel Rigid Arm

  • Enhanced variation of standard parallel arm assembly
  • Intended for use in heavy traffic areas where auxiliary door stops are installed
View

PRO7500

Parallel Rigid Offset Arm

  • Allows 1-1/4" clearance; when used in conjunction with a 6891 spacer block, the PRO arm provides 1-7/8" clearance to accommodate the use of a surface overhead stop/holder
  • Well suited for applications where weather-stripping or other hardware prevents the use of the standard PR soffit plate
View

PS7500ST

Push side slide track

  • Provides the smoothest lines available in a surface mounted door closer
  • Adjustable 85° to 110°
View

PS7540ST

Low profile push side slide track

  • Provides the smoothest lines available in a surface mounted door closer
  • Features narrow, slim track
  • Adjustable 85° to 110°
View

R7500

Regular Rigid Arm

  • Double lever arm features a non-adjustable secondary arm
  • Orbitally riveted joints prevent tampering or disassembly
View

UNI7500

Unitrol parallel arm

  • Combines the features of a double lever arm overhead door stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads
  • A compression spring buffer at the soffit plate/arm shoe will absorb 30 lbs. of force, 5° prior to the door's dead stop
  • Most controlled stop available with a surface closer
  • Door width must be specified when ordering
View

UNIJ7500

Unitrol top jamb arm

  • Combines the features of a double lever arm overhead door stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads
  • A compression spring buffer at the soffit plate/arm shoe will absorb 30 lbs. of force, 5° prior to the door's dead stop
  • Most controlled stop available with a surface closer
  • Reveal must be specified when ordering