Product Overview
- Synthetic rubber polymer: Siloxane
- Self-Adhesive
- Excellent flexibility and memory
- Flame resistant
- Moisture resistant
- Temperature range -100°F to 500°F, remains flexible at extreme temperatures
- Excellent resistance to ozone, UV and aging
- Recommended for areas using FM200 or Halon Fire Suppression Systems
- BHMA Certified to ANSI/BHMA A156.22 performance tests for heat, cold and air infiltration
- Modified acrylic pressure sensitive adhesive protected by release liner
- Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations
- Resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals
- End use temperature range of adhesive, long term exposure -30°F up to 250°F
- Shelf life of adhesive prior to installation is one year when stored at 75°F and 50% relative humidity or less
- Edge Sealing System – category “G” for 20 minute rated category B wood doors perimeter application up to: single swing 4’0 x 8’0, pairs 8’0 x 8’0. Use 9550 at the meeting edge of pairs
- Smoke and draft control – category “H”, up to 3 hours hollow metal fire doors, up to 90 minutes wood fire doors
- Meets requirements of RoHS directive
- 1/2″ wide x 1/4″ tall
- Available in 17′, 25′ and 300′ rolls
- Charcoal
Standards
- CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B
- POSITIVE PRESSURE – CERTIFIED by UL to ANSI/UL10C
- AIR INFILTRATION TESTED to ASTM E283
- ACOUSTICAL TESTED to ASTM E90
- SMOKE & DRAFT CONTROL GASKETING
- ANSI/BHMA CERTIFIED
| Brand | |
|---|---|
| Finish |
Charcoal |
| Roll Length |
17' Roll, 25' Roll, 300' Roll |
| Fire Rating |
Fire rated-UL10c |
| Gasket Type |
Adhesive-backed |
| Insert/Seal Type |
Silicone |
| Buy American Act Compliance |
Meets Buy Amercian Act – Made in USA |