Locinox VENUS Motorized Gate Closer and Low-Energy Operator for Pedestrian Gates Up to 440 lb

SKU: VENUS-S-SILV
$ 1,249.50

Product Description

The Locinox VENUS is a plug-and-play motorized gate closer designed for pedestrian swing gates weighing up to 440 lb and measuring up to 5 feet wide. When connected to an access-control system, it can also operate as a low-energy automatic gate opener.

Its brushless, reversible motor provides up to 150 Nm of torque and remains backdrivable for manual gate operation. Automated obstacle detection reverses the gate after detecting an obstruction, while speed, force, final action and other operating settings can be configured through the Locinox mobile app.

Three arm configurations allow VENUS to accommodate different post, hinge and clearance conditions. The operator incorporates its power supply, control board, input/output connections and warning light inside a compact, vandal-resistant housing. Because the motor is reversible, Locinox requires the system to be combined with a compatible lock.

Key Features

  • Motorized gate closer for pedestrian swing gates
  • Functions as a low-energy automatic opener when combined with access control
  • Supports gates weighing up to 440 lb
  • Supports gates up to 60" or 5 feet wide
  • Maximum opening angle of up to 180°, depending on arm and installation
  • Maximum motor torque of 150 Nm
  • Quiet, durable brushless motor
  • Reversible and backdrivable for manual operation
  • Automated obstacle detection with reverse function
  • Adjustable operating speed
  • Adjustable motor force
  • Adjustable final action
  • Configuration through the Locinox mobile app
  • Wi-Fi connection used during app configuration
  • Three inputs and three outputs
  • Input/output capacity up to 48W at 24V DC
  • Integrated power supply and control electronics
  • Integrated warning light
  • Heavy-duty steel gearbox
  • Compact and vandal-resistant construction
  • Anodized aluminum housing
  • Stainless-steel mechanism
  • Quick-Fix installation
  • Three available arm configurations
  • Fits standard 3-1/8" square profiles
  • Optional adapter plate for 2-3/8" posts or wall mounting
  • 110–240V AC input power
  • IP54 protection rating
  • Operating range from approximately -22°F to 158°F
  • Tested to 500,000 cycles
  • Tested for 1,000 hours of salt-spray exposure
  • UL/cUL 325 compliant and ETL tested
  • EN 16005 compliant
  • Designed for ANSI/BHMA A156.19 low-energy operation
  • Winner of an iF Design Award
  • Available in RAL 9005 black and silver
  • Two-year warranty, extendable to three years through app registration

Available VENUS Configurations

Model Item number Included arm Primary application
VENUS-S P00035920 Sliding arm Standard installations using a sliding-track arrangement
VENUS-A P00035917 Articulated arm Applications requiring an articulated operating arm
VENUS-G P00035921 Compact arm Gates equipped with 180° hinges

The correct model depends on the gate hinges, post position, available clearance and desired opening angle.

Technical Specifications

Specification Details
Manufacturer Locinox
Product family VENUS
Parent item number D00000176
Product type Motorized gate closer and low-energy operator
Application Pedestrian swing gates
Maximum gate width 60"
Maximum gate weight 440 lb
Maximum opening angle Up to 180°, depending on configuration
Maximum torque 150 Nm
Main power input 110–240V AC
Motor type Brushless and reversible
Manual operation Backdrivable
Speed adjustment Yes
Force adjustment Yes
Final-action adjustment Yes
Obstacle detection Automatic reverse function
Configuration Locinox mobile app
Access-control connections Three inputs and three outputs
I/O capacity Maximum 48W at 24V DC
Standard mounting profile 3-1/8" square
Installation method Quick-Fix
Housing Anodized aluminum
Internal mechanism Stainless steel
Protection rating IP54
Temperature range -30°C to 70°C
Standards ADA, PMR, EN 16005 and UL/cUL 325
Cycle testing 500,000 cycles
Salt-spray testing 1,000 hours
Standard warranty 2 years
Extended warranty 3 years with app registration
Available finishes RAL 9005 black and silver

Downloads and Documentation

All documents and resources below are provided directly by Locinox:

Important Installation Requirements

  • A compatible mechanical or electric gate lock is required because VENUS uses a reversible motor.
  • Permanent electrical connections must be completed by a qualified electrician.
  • The operator must be properly grounded.
  • The gate must be level, structurally suitable and equipped with compatible hinges.
  • A closed-position gate stop is required; an opening stop is recommended.
  • The operating arm must be installed on the top side of the operator.
  • The product must not be installed upside down.
  • Locinox recommends a minimum 2 mm steel-post thickness, with 3 mm preferred.
  • Aluminum posts require a 5 mm wall thickness.
  • The installer must provide sufficient clearance to reduce finger-entrapment hazards.
  • Applicable safety standards, risk assessments and local requirements must be addressed before commissioning.

Frequently Asked Questions

What is the maximum gate size for the VENUS?
The current Locinox product page and technical sheet specify pedestrian gates up to 5 feet wide and 440 lb.

Is VENUS a gate closer or an automatic opener?
It is a motorized gate closer. When combined with access control, it can also function as a low-energy automatic gate opener.

What is the difference between VENUS-S, VENUS-A and VENUS-G?
The motor and control platform are the same, but each model uses a different operating arm:

  • VENUS-S includes a sliding arm.
  • VENUS-A includes an articulated arm.
  • VENUS-G includes a compact arm for 180° hinges.

Does an operating arm come with the VENUS?
Yes. Each model is supplied with the arm corresponding to that configuration. The correct VENUS model must be selected when ordering.

Does VENUS require a lock?
Yes. Locinox states that a mechanical or electric lock is mandatory because the motor is reversible and backdrivable.

Is the lock included?
Locinox does not list a lock as part of the included VENUS components. A compatible lock must be selected for the gate and access-control application.

Can the gate be operated manually?
Yes. The reversible motor is backdrivable, allowing manual gate movement.

Does it detect obstacles?
Yes. VENUS includes automated obstacle detection with a reverse function. Correct configuration and any additional safety measures required for the installation remain essential.

Can access-control devices be connected?
Yes. VENUS provides three inputs and three outputs with a maximum capacity of 48W at 24V DC. Wiring must follow the official installation manual.

How is VENUS configured?
The installer connects to VENUS through Wi-Fi and uses the Locinox mobile app to configure its operation.

What size post is required?
Locinox specifies installation on a 3-1/8" square profile. The optional VENUS-ADAPTERPLATE permits installation on a 2-3/8" post or suitable wall application.

What is the maximum opening angle?
The technical specification sheet lists a maximum of 180 degrees. The actual opening angle depends on the selected arm, hinges and installation geometry.

Is VENUS ADA compliant?
Locinox lists VENUS as ADA compliant. When used as an automatic opener, it operates using low-energy settings consistent with EN 16005 and ANSI/BHMA A156.19 requirements. Compliance depends on correct installation and configuration.

What automatic-operator standard does it meet?
Locinox states that VENUS conforms to UL/cUL 325 for automatic operators and has been tested by ETL.

What finishes are available?
VENUS is available in RAL 9005 black and silver.

 

DESCRIPTION TAG: Shop the Locinox VENUS motorized gate closer and low-energy operator for pedestrian swing gates up to 440 lb and 5 ft wide. Three arm options available.
TITLE TAG: Locinox VENUS Motorized Pedestrian Gate Closer