Product Description
The Locinox MAMMOTH180 combines a heavy-duty hydraulic gate closer and self-closing hinge in one streamlined unit. Designed for 180-degree gate applications, it supports gates weighing up to 330 lb and includes the matching Locinox DINO hinge.
Its double-bearing construction provides smooth gate movement, while the patented Active Thermal System helps maintain consistent closing performance during temperature fluctuations. Both the closing speed and final snap are adjustable, allowing the gate’s closing action to be configured for the application.
The MAMMOTH180 uses Locinox Quick-Fix mounting for fast installation without welding. Its powder-coated aluminum housing is designed for exterior use, and the reversible construction accommodates both left- and right-handed gates.
Key Features
- Hydraulic gate closer and hinge in one assembly
- Suitable for gates weighing up to 330 lb
- Supports gate widths from approximately 35-7/16" to 60"
- Maximum opening angle: 180°
- Adjustable closing speed
- Adjustable final snap
- Double-bearing hinge construction
- Active Thermal System for consistent closing speed
- Reversible for left- or right-opening gates
- Two-dimensional horizontal and vertical adjustment
- Approximately 13/16" horizontal adjustment
- Approximately 13/16" vertical adjustment
- Low opening resistance of no more than 16 Nm
- ADA compliant from gate widths of 3 feet or greater
- Vandal- and tamper-resistant construction
- Powder-coated aluminum housing
- Quick-Fix mounting system
- DINO lower hinge included
- Tested to 500,000 cycles
- Tested for 500 hours of salt-spray exposure
- 3-year manufacturer warranty
- Available in RAL 9005 black and silver
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Locinox |
| Model | MAMMOTH180 |
| Item number | P00009620 |
| Product type | Hydraulic gate closer and hinge |
| Maximum gate weight | 330 lb |
| Gate-width range | 35-7/16"–60" |
| Maximum opening | 180° |
| Closing-speed adjustment | Yes |
| Final-snap adjustment | Yes |
| Horizontal adjustment | 13/16" |
| Vertical adjustment | 13/16" |
| Maximum opening resistance | 16 Nm |
| Handing | Reversible |
| Gate-profile compatibility | Square and round |
| Main material | Powder-coated aluminum |
| Temperature range | -30°C to 70°C |
| Cycle testing | 500,000 cycles |
| Salt-spray testing | 500 hours |
| Warranty | 3 years |
| Included component | DINO hinge |
| Available finishes | RAL 9005 black or silver |
Downloads and Documentation
All documents below are provided directly by Locinox:
- MAMMOTH180 Technical Specification Sheet – PDF
- MAMMOTH180 Installation Instructions – PDF
- MAMMOTH180 Product Sheet – PDF
- MAMMOTH180 Architect and Engineering Specifications – Word
- MAMMOTH180 Installation Video
- Official Locinox MAMMOTH180 Product Page
Frequently Asked Questions
What is the maximum gate weight for the Locinox MAMMOTH180?
The MAMMOTH180 is designed for gates weighing up to 330 lb.
Does the MAMMOTH180 function as both the closer and the hinge?
Yes. The MAMMOTH180 is a self-closing hydraulic hinge, and the corresponding DINO lower hinge is included.
Can it be used on left- and right-opening gates?
Yes. The MAMMOTH180 is reversible and suitable for either gate handing.
Can the closing action be adjusted?
Yes. Both the closing speed and final snap can be adjusted independently.
Does it allow the gate to open 180 degrees?
Yes. The product is designed for gate applications requiring an opening angle of up to 180 degrees.
Does installation require welding?
The MAMMOTH180 uses Locinox’s Quick-Fix mounting system. Installation requirements depend on the gate construction, profile, and wall thickness, so the official installation instructions should be reviewed before ordering or drilling.
Can it be installed outdoors?
Yes. Locinox describes the powder-coated aluminum housing as weatherproof and designed for exterior use.
What finishes are available?
The official Locinox USA page lists RAL 9005 black and silver.