Product Description
The Locinox INTERIO is a concealed hydraulic gate closer and matching hinge system built directly into the gate frame. Once installed, the closer is almost entirely hidden, preserving the gate’s appearance while providing controlled self-closing operation.
Designed for gates weighing up to 330 lb and measuring up to 60 inches wide, the INTERIO allows the gate to open as far as 125 degrees. Its hydraulic mechanism provides independent adjustment of closing speed and final snap, while integrated pretension simplifies installation and setup.
The powder-coated aluminum housing protects the internal mechanism against exterior conditions. The INTERIO is reversible for left- or right-opening gates, uses Quick-Fix mounting and is available with optional fixation sets for ground- or wall-mounted applications.
Key Features
- Concealed hydraulic gate closer and hinge system
- Completely integrated into the gate frame
- Matching hinge set included
- Designed for gates weighing up to 330 lb
- Supports gate widths up to 60"
- Maximum opening angle of 125°
- Adjustable closing speed
- Adjustable final snap
- Integrated pretension for easier installation
- Consistent closing speed during humidity and temperature changes
- Reversible for left- and right-opening gates
- Maximum opening resistance of 20 Nm
- ADA compliant from gate widths of 3 feet or greater
- Vandal- and tamper-resistant concealed construction
- Powder-coated aluminum housing
- Quick-Fix mounting system
- Optional ground-mounting set available
- Optional wall-mounting set available
- Tested to 500,000 cycles
- Tested for 500 hours of salt-spray exposure
- 3-year manufacturer warranty
- Recommended for use with a Locinox GATESTOP
Compatible Gate Frames
Locinox specifies the INTERIO for square gate frames in the following sizes:
| Gate-frame size | Frame-wall requirement |
|---|---|
| 2" | Frame-wall thickness of 0.125" or less |
| 2-1/4" | Frame-wall thickness of 0.125" or greater |
| 2-1/2" | Frame-wall thickness of 0.125" or greater |
The gate frame must also have sufficient internal space and structural strength to accommodate the concealed closer and hinge components. Confirm all dimensions against the official installation manual before fabricating the gate.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Locinox |
| Model | INTERIO |
| Item number | P00007631 |
| Product type | Concealed hydraulic gate closer and hinge |
| Maximum gate width | 60" |
| Maximum gate weight | 330 lb |
| Maximum opening angle | 125° |
| Opening force | 14.75 ft-lb / maximum 20 Nm |
| Closing-speed adjustment | Yes |
| Final-snap adjustment | Yes |
| Handing | Reversible |
| Installation | Concealed inside gate frame |
| Mounting system | Quick-Fix |
| Housing | Powder-coated aluminum |
| Temperature range | -30°C to 70°C |
| Listed standards | ADA, PMR and RoSPA |
| Cycle testing | 500,000 cycles |
| Salt-spray testing | 500 hours |
| Warranty | 3 years |
| Matching hinge set | Included |
Optional Mounting Sets
- INTERIO-GROUND – P00004754: Ground-fixation set for applications requiring the lower hinge to mount at ground level.
- INTERIO-WALL – P00007705: Wall-fixation set for applications where the gate is mounted beside a wall or masonry structure.
The correct fixation set depends on the surrounding structure and gate design. These optional sets are not identified as standard components of the INTERIO package.
Downloads and Documentation
All documents and resources below are provided directly by Locinox:
- INTERIO Technical Specification Sheet – PDF
- INTERIO Installation Instructions and Fabrication Dimensions – PDF
- INTERIO Architect and Engineering Specifications – Word
- Locinox Gate Closers and Access Control Brochure – PDF
- INTERIO Installation Video
- Official Locinox INTERIO Video
- Official Locinox INTERIO Setup Video
- Official Locinox INTERIO Product Page
- INTERIO-GROUND Official Product Page
- INTERIO-WALL Official Product Page
Important Installation Information
- The INTERIO is intended primarily for new gate fabrication because the closer and hinge system must be built into the gate frame.
- Confirm the gate-profile dimensions and wall thickness before fabrication.
- The closer must be installed in the correct upright orientation.
- A closed-position gate stop should be provided.
- Locinox recommends using a GATESTOP to limit opening to the permitted maximum.
- Closing speed and final snap should be adjusted only after the gate has been properly aligned.
- The installation manual shows a maximum opening angle of 125 degrees.
- Welding and fabrication must not interfere with the internal closer or mounting clearances.
Frequently Asked Questions
What is the maximum gate weight for the INTERIO?
The INTERIO is designed for gates weighing up to 330 lb.
What is the maximum gate width?
Locinox specifies a maximum gate width of 60 inches.
Is the INTERIO visible after installation?
The closer and matching hinge system are built into the gate frame, making the installation substantially concealed.
Does the INTERIO include the matching hinge?
Yes. Locinox describes the INTERIO as including a matching hinge set.
Can it be added to an existing gate?
Possibly, but substantial gate-frame modification may be required. Because the mechanism must fit inside the frame, INTERIO is best planned during gate fabrication.
What is the maximum opening angle?
The maximum opening angle is 125 degrees.
Can the closing speed be adjusted?
Yes. Closing speed and final snap can be adjusted independently.
What is final snap?
Final snap controls the gate’s movement near the end of the closing cycle, helping it overcome latch resistance and close properly.
Can it be used on left- and right-opening gates?
Yes. The INTERIO is reversible for either gate handing.
Is the INTERIO ADA compliant?
Locinox states that it is ADA compliant, with opening resistance below 5 lb and a maximum of 20 Nm, when installed on gates at least 3 feet wide.
What gate-frame sizes are compatible?
Locinox lists 2", 2-1/4" and 2-1/2" square gate frames, subject to the stated wall-thickness requirements.
What are INTERIO-GROUND and INTERIO-WALL?
They are optional fixation sets used for specific ground-mounted or wall-mounted gate configurations.
Is a gate stop required?
The closer’s opening must be limited to its permitted range. Locinox recommends pairing INTERIO with a GATESTOP.
TITLE TAG: Locinox INTERIO Concealed Hydraulic Gate Closer