Ives WS406/407CCV US26D Wall Stop
Wall Stop, Concave, with Drywall and Masonry Anchors, Satin Chrome
Center hung pivot, 500lb with bottom base mount
Maximum door load 500 pounds
Recommended for use with 1 3⁄4" minimum door thickness
Not recommended for doors larger than 4'0" X 8'0"
Easy installation, tilt on bearing and bearing pin
Adjustable floor to door clearance 3⁄16" to 3⁄4", consult
product support if greater than 3⁄4"
Vertical adjustment range 3⁄16", with positive locking
Non-handed
7255 Set (7255 Top and 7255 Btm)
7255 Top (7253-7255-7255J-7256 Top), header mount
7255 Btm (7255 Btm), base plate mount
Specifications
Material substrate Made from cast brass
Certifications Meets ANSI/BHMA A156.4 C07032
Dimensions § Radius stop (A) to clear heel of door edge
§ Pivot distance (B) 1 3⁄4" (44mm) minimum from jamb to centerline of pivot
pin. Radius heel edge of door, 1 5⁄8" (41mm) minimum recommended.
§ Clearance from bottom edge of door to floor mounting surface is
adjustable from 3⁄16" (5mm) to 3⁄4" (19mm) by varying the depth of the
mortise (C) in the bottom of the door, refer to Chart D. Consult product
support when clearance is over 3⁄4" (19mm).
Table D
Clearance depth of mortise
3⁄16" (5mm) 1 3⁄16" (30mm)
3⁄8" (10mm) 1" (25mm)
1
⁄2" (13mm) 7
⁄8" (22mm)
5⁄8" (16mm) 3⁄4" (19mm)
3⁄4" (19mm) 5⁄8" (16mm)