Arrow GL08 Single Dummy Grade 1 Cylindrical Lever Lock, SR Lever, US26D. The Arrow GL Series is an ANSI/BHMA certified Grade 1 heavy duty lever lock that meets ADA standards at an economical price. Arrow designed it with fewer subcomponents for an easier installation.
Function: GL08 Single Dummy
- Rigid (non-turning) lever for one side of the door only. Used as a pull, or to match the look of active trim. It does not operate a latch.
Features
- OverDrive freewheeling lever action: when locked, the lever disengages from the latch mechanism. Stops in the rose insert limit lever travel to about 70 degrees.
- Interlocking dichromate-plated steel lever tubes attached to the rose insert for a rigid feel
- Thru-bolted inside the 2-1/8" bore, with two support plates on the door faces
- Non-handed; levers operate in both directions
- Stainless steel rose scalp
Specifications
| Certification | ANSI/BHMA A156.2, Series 4000, Grade 1 |
| Fire rating | UL and cUL listed for use on 3-hour, A-label single swinging doors |
| Accessibility | ADA, ANSI A117.1; California code for levers returning within 1/2" of the door |
| Lever | SR, pressure cast zinc |
| Door thickness | 1-3/4" to 2" (factory set for 1-3/4") |
| Door prep | 2-1/8" bore through the door, 1" edge bore |
| Backset | 2-3/4" standard |
| Latch | Stainless steel, 1/2" throw; stainless steel front 2-1/4" x 1-1/8", beveled 1/8" in 2" |
| Strike | Stainless steel, ANSI 4-7/8" x 1-1/4", curved lip |
| Cylinder | 6-pin solid brass, 2 brass keys, keyed different; Arrow AR or Schlage C keyway |
| Finish | US26D (626) Satin Chrome only |
| Handing | Non-handed |
| Case quantity | 6 |
| Warranty | 5 years |
| Finishes offered here | US26D (626) Satin Chrome |
Good to Know
- Keyed functions use the G71 deadlatch; non-keyed functions use the G73 spring latch.
- SFIC-prepped locks are supplied without a core.
- Arrow states its products are not designed or intended for aftermarket modification, and that such modification (for example third-party electrification) voids the warranty.
Options on This Listing
| Lever | SR Lever |
| Finish | US26D (626) Satin Chrome |
Choices Made at Checkout
These are selected in the product options below the variant choices. Some carry an added charge, shown next to the choice.
| Strike | ANSI 1-1/4" x 4-7/8" (306), the only strike offered |
| Backset | 2-3/4" backset (standard, included); 2-3/8" backset latch, 1" front (G72 spring or G70 dead); 3-3/4" backset latch, 1-1/8" front (G83 spring or G81 dead); 5" backset latch, 1-1/8" front (G93 spring or G91 dead) |
What is Included
- Complete lockset: inside and outside trim, latch, strike and mounting hardware as supplied by Arrow
Frequently Asked Questions
Q: Is this lock handed?
A: No. Arrow lists it as non-handed, so it fits left hand and right hand doors.
Q: Does a single dummy latch the door?
A: No. It is a fixed lever for one side only, used as a pull or to match other trim. It has no latch.
Q: What door thickness does it fit?
A: 1-3/4" to 2" (factory set for 1-3/4").
Q: What backset is it?
A: 2-3/4" standard. Any other backset or strike choices for this lock are listed under the checkout options.
Q: Is it fire rated?
A: UL and cUL listed for use on 3-hour, A-label single swinging doors.
Q: What is the warranty?
A: Arrow limited warranty: 5 years.
Source: all specifications are taken from Arrow Lock literature: the Arrow 2026 Price Book (February 2, 2026), Arrow product catalogs and cut sheets, and arrowlock.com. Where older literature differs, the 2026 price book is used. Please check your door preparation, door thickness, backset, strike and handing against these specifications before ordering.