-
The Trilogy Networx is a gateway device used within the Trilogy Networx wireless system. Combines with wireless wall-mounted expanders and plug-in wireless expanders to cover more building space with a single IP address. Installation is simple, only requiring access to one RJ-45 ethernet network cable for both communication and power.
Features:
- Network gateway for Networx lock systems
- Power-over-ethernet (POE) gateway – no power supply or adapter needed
- Expand your Networx lock system with up to 7 expanders (AL-IME2-EXP). Note expanders cannot communicate with older gen 1 gateways
- Mount within 175 feet (radially) from the intended wireless lock location(s)
- Expanders should be mounted in elevated areas – recommended mounting position 6 to 12 in. below standard 8-9 foot ceiling
- Cost-effective and easier to wire than conventional gateways
- Networx system automatically identifies all newly powered expanders and quickly self-determines the best wireless signal pathways
- Each Gen. 3 gateway and a maximum of seven expanders can be addressed as one group
- Total of 99 addressable groups supported (addressable by two rotary switches)
- Open areas increase range while concrete building construction, walls, ceilings and narrow corridors decrease range
- Drop ceiling installation not recommend, signal strength may be affected
- Generation 3 gateways are compatible with DL-WINDOWS version 5.5.4 and later only
- Generation 3 gateways can be mixed into an existing system that includes older “non-version 3” gateways
- Optional hardwired switch that connects directly to the gateway to initiate global lockdown
Specifications:
- Dimensions: 4.5 (H) x 6.0 (W) x 1.94 (D) in.
- Ethernet: 100Base-TX (Using RJ-45 Jack), 10Base-T
- Wireless Protocol: DHCP, TCP/IP, UDP/IP
- Power: POE
- Radio Frequency: 900MHz
- Storage Temperature: -40° to 185°F (-40° to 85°C)
- Operating Temperature: -4°F – 140°F (-20°C – 60°C)