• Deadlocking latch

• Latch by lever inside or key outside

• Outside lever rigid at all times

• ANSI F86

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push/turn button in inside lever

• Push button released by key outside or lever inside

• Turn button must be released manually

• Key retracts latch when outside lever is locked

• ANSI F109

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by inside lever

• Outside lever rigid at all times.

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Blank rose outside

• Latch by lever inside

• Minimum clearance of 1-1/8" on single doors and 2-1/4" between double doors

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key in inside lever

• Key in outside lever retracts latch when outside lever is locked

• Inside lever always operative

• ANSI F88

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Both levers rigid at all times

• Latch by key either side

• Use only on rooms with more than one exit

• ANSI F87

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push button in inside lever

• Push button released by key or turning inside lever

• Closing door does not unlock outside lever or release button

• Key in outside lever retracts latch when outside lever is locked and releases inside push button

• ANSI F82

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever

• Key in either lever locks or unlocks both levers

• ANSI F91

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever

• Key in either lever locks or unlocks its own lever only

• Use only on rooms with more than one exit

• ANSI F80

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key

• Key in outside lever locks or unlocks outside lever and retracts latch

• Inside lever always operative

• ANSI F84

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by key

• Key in either lever locks or unlocks outside lever

• Inside lever always operable

• Locked indication on inside rose standard with this function

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push button in inside lever

• Key retracts latch when outside lever is locked

• Push button released by turning inside lever, closing door, or by key in outside lever unless push button is fixed in locked position by turning coin slot in inside lever

• Slotted inside button must be manually released

• ANSI F92

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by key outside and lever inside • Outside lever always rigid

• Depressing push button when door is closed shuts out all keys except emergency key and projects visual occupancy indicator in cylinder face

• Push button released by turning inside lever automatically reactivating all keys and retracting visual occupancy indicator

• Lock out key fixes push button in locked position, shutting out all keys except emergency

• Push button fixed by lockout key must be released manually

• Lock out key provided

• Emergency key ordered separately. Part # 6267EMK

• ANSI F93

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Deadlocking latch

• Latch by either lever unless outside lever is locked by push button inside or key outside

• Rotating inside lever or closing door releases inside button only, but does not unlock the outside lever if locked by key

• Key outside locks or unlocks outside lever and also retracts latchbolt when locked

• ANSI F90

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• 10G70: Power off, unlocks outside lever

• 10G71: Power off, locks outside lever

• Deadlocking latch

• Key retracts latch

• Inside lever always allows egress

• Voltage requirements: 12VDC or 24VDC Regulated; always specify voltage

• 250mA at 24VDC or 500mA at 12VDC

• Provided with ElectroLynx® 8-Pin Connector

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• 10G70: Power off, unlocks outside lever

• 10G71: Power off, locks outside lever

• Deadlocking latch

• Key retracts latch

• Inside lever always allows egress

• Voltage requirements: 12VDC or 24VDC Regulated; always specify voltage

• 250mA at 24VDC or 500mA at 12VDC

• Provided with ElectroLynx® 8-Pin Connector

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Latch by either lever

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• Latch by either lever unless outside lever is locked by push button in inside lever

• Turning inside lever or closing door releases button

• Emergency button in outside lever unlocks, with use of a blade screwdriver in outside lever and releases inside button

• ANSI F76

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Latch by either lever unless outside lever is locked by push button in inside lever

• Turning inside lever or closing door releases button

• Rotating thumbturn in outside lever unlocks the outside lever and releases the inside button

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• For wood or custom hollow metal doors

• Lever and rose both sides joined by two through-bolts

• Requires special door preparation — see template

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• For wood or custom hollow metal doors

• Lever and rose both sides joined by two through-bolts

• Requires special door preparation — see template

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

• For wood or custom hollow metal doors

• Lever and rose both sides joined by two through-bolts

• Dummy latch plate

• Uses standard door prep template

Finishes Come In: 26D,03, 04,10, 10B, 26

Levers Come In: L, B & P

Strength, Durability and Security

• Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements
• Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements  
• 7 YEAR LIMITED WARRANTY - no service required to maintain warranty

Convenience

• Installs in 1 minute or less
• Quickly adapts to fit multiple through-bolt positions
• User friendly packaging
• User friendly instruction sheets
• Convenient installation diagram on box

Design

• Solid feel and precise lever action
• Slim rose design available
• Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
• Levers are solid one piece cast construction, except “J” lever

Security

• Torx® and spanner screws optional
• Classroom security and multiple locking functions are available
• Vandal resistant, Free Wheeling (FW) trim optional (not available with 70 or 71 functions)
• Security key systems available (Signaturem Keso, BR-XC, XC)

Certification Compliance

• Certified ANSI A156.2 Series 4000-Grade 1
• UL listed to USA and Canadian safety standards. Listed for 3 hour doors (double doors require 41-option)                                                                                     Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Positive Pressure: Meets UL 10C and UBC 7-2 (1997)
• All levers conform to ADA requirement for barrier-free accessibility
• Levers (L,J & P) conform to California Administrative Code Title 19 and 24
• All individual components of a total door opening are required to comply with each code (Hurricane code)
• Conforms to national & state fire and handicapped requirements

Flexibility

• Fits a variety of door preparations with adaptable through-bolt positioning
• Accommodates retrofit applications with optional 2-3/8", 3-3/4", and 5" backset latches
• 6 ADA lever styles to complement a wide array of design applications
• Levers (B, L, J & P) are non-handed for efficient warehousing and for ease of installation
• 11 Architectural grade finishes
• 21 Functions
• SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications

Features

• Meets and exceeds ANSI/BHMA 156.4 Grade 1 Requirements
• UL and UL 10C Listed                                                                                                   Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Complies with ADA requirements and ANSI 111.7 and exterior doors
• Adjustable closing force from size 1-6
• High impact full plastic cover secured by machine screws
• One-piece high strength aluminum alloy body
• 1-1/4” diameter piston for enhanced control
• 7/16” Square arm engagement for enhanced torque transmission
• Heat treated rack and pinion assembly
• Speed control valves- Separate latching, closing and sweep speed, captivated valves are easily adjusted using a standard 1/8" Allen Wrench 
• Arms and accessories are powder coated
• 10 year limited warranty, body is date coded

Flexibility

• Retrofits a Dor-O-Matic SC 80 and Dorma 8600
• Both machine and self-tapping screws provided
• Universal body is interchangeable for all applications (standard, top jamb & parallel)
• Designed for aluminum store front doors and frames
• Similar design style to complement the Heavy Duty Powerglide Series
• Allows door to open a full 180° (trim permitting)

Innovation

• SARGENT's revolutionaryMicroShield®available. This antimicrobial silver-based finish coating permanently suppresses the growth of bacteria, algae, fungus, mold, and mildew. EPA and NSF approved and FDA listed

Convenience

• Non-handed closer
• All weather hydraulic fluid
• Easily installed in minutes!
• Easy-to-use instructions
• Full size paper templates
• Mortise nuts available when door condition requires through boltingTri Pack or "Universal Packed" - JUO or JUH (Hold Open). Packages include one extra bracket that gives the installer a choice for installation from Standard, Parallel or Top Jamb applications.
• When Tri-Pack is not required, specific application can be ordered.

Features

• Certified ANSI/BHMA  A156.4 Grade 1
• Conforms to UL10C and UBC for positive pressure fire test
• UL Listed and cUL Listed to Canadian Safety Standards listed for use on fire doors
  Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• 10 year warranty
• User friendly versatile mounting applications permit standard, top jamb, parallel and track installations
• Self sticking templates supplied for most applications
• Adjustable spring power allows 1431 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory
• One door closer body for all applications.  All 1431are non-handed.
• Meets ADA requirements in all applications, except Push Side Track application (except track)
• High impact non-corrosive plastic covers with two machine screws standard, metal covers and lead lined are optional
• All weather fluid allows closer to operate effectively in extreme temperatures without readjustment
• 1-1/2" diameter piston for superior door control
• Standard pressure relief valves for both opening and closing cycles protect the door & frame from damage caused by abuse
• Retrofits existing SARGENT 1230/1231 Series Closer installations

Additional Options

• 74: Lead lines cover
  CPC: Clear powder Coat
  MC: Metal Cover

Heavy Duty Construction

• Heat treated full rack and pinion for high strength & wear resistance
• Heavy duty one piece high silicon content aluminum alloy body provides corrosion resistance, superior strength and wear resistance
• 1/2" arm engagement over a 7/16 square spindle ensures a wear-resistant tight joint

Fasteners

• Machine Screws and self tapping screws provided for closer and arm
• In addition, wood screws supplied when installed on wood doors with through bolts

Valves

• Separate brass low sensitivity control valves offer ability to separately regulate door speed, latching, backcheck and optional delayed action
• All valves are captured to prevent accidental removal, adjustable with an 1/8" Allen wrench
• Adjustable backcheck protects the door and hardware from damage during the opening cycle
• Adjustable delayed action (optional) permits easy access for physically impaired individuals

Full Complement of Arm Types

• Standard and parallel arms
• Push and pull track arms
• Heavy duty forged steel arms are finely finished and interchangeable between SARGENT 281 and 1431, and 351 Series.  The cold formed arms (RO/RP9) are unique to the 1431 series and not interchangeable with other SARGENT closers.

Innovation

• SARGENT's revolutionary MicroShield®available.  This antimicrobial silver-based finish coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew.  EPA and NSF approved and FDA listed.

Specifications

• For Doors: 1-3/4" (44mm) thick standard. 3-3/4" (95mm) minimum stile width required for single door application. 3-1/2" (89mm) minimum stile width required for double door application
• Outside trim: 28 series lever &rose trims, GTB Pulls & Plates, OB knob trims & Thumb Piece trims

• Mounting: Furnished standard with wood and machine screws. Available with thru bolts and mortise nuts
• Cover : steel
• Chassis : Nonferrous alloy
• Rail Assembly : Roll formed steel
• End Cap: steel
• Hand: Reversible. Device is packed standard LHRB
• Latchbolt : Brass
• Strikes: 646 Top Strike (Panic &Fire), 655 Bottom Strike (fire), 624 Bottom Strike (panic) 
• Dogging Feature: Allen-type key furnished standard (non fire rated devices only)

Features

• ANSI/BHMA Grade 1 (A156.4)
• Meets Buy America Act
• Conforms to UL10C and UBC for positive pressure fire test
• 10 Year Warranty
• Versatile mounting applications permit standard, top jamb, parallel and track installations
• UL and CUL listed for use on fire doors                                                                
•    Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• Adjustable spring power allows 281 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory
• One door closer body for all applications, non-handed
• ADA requirements are met with the 281 model at all applications (except track)
• Standard pressure relief valves for both opening and closing cycles protect the closer seals and all hardware from excessive force
• Heavy duty mounting bracket for easy installation of full size iron closer
• Retrofits existing Sargent 250 and 1250 Series Closer installations
• High impact non-corrosive plastic covers standard
  (Optional metal cover available)
• Cover secured by machine screws
• 1-1/2" diameter piston for superior door control
• All weather fluid allows closer to operate effectively in extreme heat and cold without readjustment

Heavy Duty Construction

• Heat treated full rack and pinion for high strength & wear resistance
• Heavy duty one piece cast iron body provides superior strength and wear resistance
• 1/2" arm engagement over a 7/16 square spindle ensures a wear-resistant tight joint

Fasteners

• Machine screws and self tapping screws provided for closer and arm
• In addition, wood screws supplied when installed on wood doors without through bolts

Full Complement of Arm Types

• Standard and parallel arms
• Push and pull track arms
• Security track
• Security parallel arm
• Heavy duty forged steel arms are finely finished and interchangeable between SARGENT 281 and 1431, 250, 1250, and 351 series

Valves

•  Separate brass low sensitivity control valves offer ability to separately regulate door speed, latching, backcheck and optional delayed action
• All valves are captured to prevent accidental removal, adjustable with an 1/8" Allen wrench
• Adjustable backcheck protects the door and hardware from damage during the opening cycle
• Adjustable delayed action (optional) permits easy access for physically impaired individuals

Features

• Chassis mounted unit construction assures easy installation and maintenance
• Tapered push rail and angled covers
• Steel end caps and covers
• All devices meet ANSI/BHMA Standard 156.3 Grade 1
• UL Listed
• UL Listed to Canadian safety standards                                                                  
• Available as Fire Exit Hardware (12-)

Specifications

• For Doors - 1-3/4" (44mm) thick standard. 4-1/2" (114mm) minimum stile width required for single or double door application using standard 649 strike
• Mounting - Furnished standard with wood and machine screws. Available with through-bolts and mortise nuts

• Cover - steel
• Chassis - Nonferrous alloy
• Rail Assembly - Roll formed steel
• End Cap - steel
• Hand - Non handed
• Latchbolt - Stainless Steel 3/4" (19mm) throw
• Strike - 649 packed standard
• Dogging Feature - Allen-type key furnished standard(non fire rated devices only)

Features

• ANSI/BHMA A156.4 Grade 1
• Conforms to UL10C and UBC for positive pressure fire test
• UL Listedand cUL Listed to Canadian Safety Standards listed for use on fire doors                                                                                                                                Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
• 10-year warranty
• Versatile mounting applications permit standard, top jamb, parallel and track installations
• Adjustable spring power allows 351 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory
• One door closer body for all applications. All 351 are non-handed.
• Meets ADA requirements in all applications except Push Side Track application
• High impact non-corrosive plastic covers standard, metal optional. Both secured with two machine screws
• All weather capabilities
• Captivated brass valves
• Interchangeable forged steel arms
• Standard and parallel arms
• Push and pull track arms (including double egress)
• Heavy duty forged steel arms are finely finished and interchangeable between SARGENT 351, 1431 and 281 Series Innovation
• Standard pressure relief valves for both opening and closing cycles protect the door & frame from damage caused by abuse

Heavy Duty Construction

• Heat treated full closed rack and pinion provide control from the full open position
• Heavy duty one piece die cast aluminum silicon alloy body with 14% silicon provides superior strength and wear resistance
• 1/2" arm engagement over a 7/16 square spindle ensures a wear-resistant tight joint

Fasteners

• Machine screws and self tapping screws provided for closer and arm
• In addition, wood screws supplied when installed on wood doors without through bolts

Full Complement of Arm Types

• Interchangeable forged steel arms
• Standard and parallel arms
• push and pull track arms (including double egress)
• Heavy duty forged steel arms are finely finished and interchangeable between SARGENT 351, 1431 and 281 series

Valves 

• Brass body low sensitivity control valves offer separate regulating for door speed, latching, backcheck and optional delayed action
• All valves are controlled by an 1/8" Allen wrench to discourage tampering and are captivated to prevent removing valves from the body and damaging door closer
• Adjustable backcheck (standard) protects the door and hardware from damage during the opening cycle
• Adjustable delayed action (optional) permits easy access for physically impaired individuals
• Valves are captivated to prevent accidental removal

Specifications

• For Doors: 1-3/4" (44mm) thick standard. 3-3/4" (95mm) minimum stile width required for single door applications. 3-1/2" (89mm) minimum stile width required for double door application

• Mounting: Furnished standard with wood and machine screws; Available with through bolts and mortise nuts
• Cover: steel
• Chassis: Nonferrous alloy
• Rail Assembly: Roll formed steel
• Hand: Reversible. Device is packed standard LHRB
• Latchbolt: Brass
• Strikes: 646 Top Strike (Panic & fire), 655 Bottom Strike (fire), 624 Bottom Strike (Panic)
• Dogging Feature: Allen-type key furnished standard (Non Fire Rated Devices only)

• Chassis mounted unit construction assures easy installation and maintenance
• Tapered push rail and angled covers
• Steel endcaps and covers
• Available in six functions
• UL Listed
• UL Listed to Canadian safety standards

Sargent 3828 Rim Exit Device With 12-Fire Option

Features

• Chassis mounted unit construction assures easy installation and maintenance
• Tapered push rail and angled covers
• Steel endcaps and covers
• Available in seven different functions
• ANSI/BHMA Standard 156.3 Grade 1
• UL Listed
• UL Listed to Canadian safety standards

• Warehouses
• Fire exits from stairwells in office buildings

Specifications

• For Doors: 1-3/4" (44mm) thick standard. 4-1/2" (114mm) minimum stile width required for single or double door applications using standard 649 strike
• Mounting: Furnished standard with wood and machine screws; Available with through bolts and mortise nuts
• Cover: steel

• Chassis: Nonferrous alloy
• Rail Assembly: Roll formed steel
• End Cap: Steel
• Hand: Non-handed
• Latchbolt: Stainless steel 3/4" (19mm) throw
• Strike: 649 packed standard
• Dogging Feature: Allen-type key furnished standard (non fire rated devices only)

The SARGENT 421 is a revolutionary door closer that provides the highest performance of any track type door closer made today. Its innovative cam action design applies the closing forces in exactly the proper locations for smooth and efficient operation. The result is a door that is light to open and still has more than enough power to close.

Features

• Conforms to standards UL 10C and UBC 7-2 for positive pressure fire test
• UL and cUL listed for use on fire doors                                                                         Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. 
• 10 Year Warranty 
• While meeting the 5 lb. ADA requirements, the 421 still provides exceptional force to close and latch door
• Square spindle provides fool proof arm installation
• Push or pull installations with the same closer body
• Adjustable spring power allows 421 closers a size range of 1 through 6
• Closer bodies are non-handed
• Designed to meet ADA requirements in push or pull track applications
• Standard pressure relief valves for both opening and closing cycles protect the
  door & frame from damage caused by abuse
• High impact non-corrosive one piece plastic covers standard (Optional metal
  cover available)
• Cover secured by machine screws 
• All weather fluid allows closer to operate effectively in extreme heat and cold
  without readjustment

Heavy Duty Construction

• Heavy duty one piece high silicon content aluminum alloy body provides
  corrosion resistance, superior strength and wear resistance
• Dual pistons provide superior door control and high efficiency
• 1/2" arm engagement over a 7/16 square spindle ensures a wear-resistant tight joint
• Full complement roller bearings provide resistance to abuse

Fasteners

• Machine screws and self tapping screws provided for closer and arm
• In addition, wood screws supplied when installed on wood doors without through bolts

Valves

• Separate low sensitivity brass control valves offer ability to separately regulate
  door speed, latching, backcheck
• All valves are captured to prevent accidental removal; adjustable with a
  5/32" Allen wrench
• Adjustable backcheck protects the door and hardware from damage during the
  opening cycle

Innovation

• Innovative cam and dual piston design provides superior performance with the
  aesthetics of a track type closer
• SARGENT’s revolutionary MicroShield™ available. This antimicrobial silver-based finish coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. EPA and NSF approved and FDA listed