Von Duprin

At US Lock Supply, our Von Duprin selection covers the full range of the many different exit devices and door openers the Von Duprin company offers. Some of our popular sellers from the Von Duprin exit device line include the Von Duprin 33 series of vertical rod exit devices; the Von Duprin 99 and Von Duprin 98 series of concealed, surface mounted and other vertical rod exit devices; the Von Duprin 22 exit device series; the Von Duprin 55 series of cross bar exit devices; and the Von Duprin 88 exit device series.

We offer Von Duprin products in a wide range of options, such as several different finishes to fit your application and in fire-rated or non-fire-rated versions. Many of these exit devices are fully reversible (non-handed) and field-sizeable to make them easy to install for an exact fit.

For rugged exit devices that stand up to heavy use and keep your building’s exits secure, order Von Duprin exit device products today from US Lock Supply.

Sort by

Show
24
36
48

Von Duprin 6400 Electric Strike

$ 392.08

Von Duprin 6400 Electric Strike

by Von Duprin

$ 392.08

Quantity

Overview

The 6400 Series electric door strike is designed to be highly configurable to fit almost any mortise or cylindrical lock, including those with offset latches. It provides a fail-secure only solution for fire-rated openings.

The strike allows installers to insert and lock in place the deadbolt keeper, or the plug and dead latch ramp, anywhere within its 3-1/8” vertical opening to suit latchbolt position and functional needs Combined with horizontal adjustability, this makes the easy-to-install 6400 Series a good fit for installations where misalignment or a tight fit may be a problem.

Application

Fits cylindrical and nearly any mortise lock
For interior or exterior doors with hollow metal, aluminum, or wood frames
3-hour fire-rated to UL 10C (fail secure only)

Versatility

Modular design is configurable to functional needs
Two faceplates standard
Field-selectable 12/24 VDC or 12/24 VAC
Non-handed, internal solenoid design
1/8" horizontal with a range of vertical adjustments for misaligned doors & frames

Strength and durability

Heavy-duty stainless steel construction
1500 lbs. static strength
70 ft-lbs. dynamic strength

Opening

Single doors with wood, hollow metal or aluminum frames
Mortise locks, cylindrical locks and dead latch applications
1" deadbolt (as night latch only, no release)

Throw

3/4" latch

Power

Field-selectable voltage
12 VDC continuous duty at 0.375 Amp
24 VDC continuous duty at 0.19 Amp
12/24 VAC intermittent duty at 0.28-0.565 Amp

Dimensions

See the 6400 Series data sheet for dimensions and wiring diagrams.
Standard 4-7/8" faceplates (one each for offset and centerline locks)
1-3/4" backbox depth

Available finishes

BHMA 630 satin stainless steel

Part options

Plug-in latchbolt monitor
12 VAC to 12 VDC rectifier
24 VAC to 24 VDC rectifier
Entry buzzer

Downloads

Von Duprin 8827EO Surface Vertical Rod Exit device 88 Series

from $ 1,726.40

Von Duprin 8827EO Surface Vertical Rod Exit device 88 Series

by Von Duprin

$ 1,726.40

Finish

Quantity

Von Duprin 8827EO Surface Vertical Rod Exit device 88 Series
The 88-Series is a traditional crossbar design with proven service on rugged applications. All Von Duprin 88 Series exit devices are UL listed for Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI Grade 1 requirements.

88-Series Surface Mounted Vertical Rod Device (8827) - for all types of single or double doors, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 or 161 cutouts and fits door stiles as narrow as 3-1/2".

Features: Fully Reversible (Nonhanded), Field Sizeable, Hex key dogging, 5/8” throw latch bolt.

Features: Fully Reversible(Nonhanded), Field Sizeable, Hex key dogging, 5/8" throw latch bolt.

Dimensions –

     -     Crossbar height to finished floor: 36-13/16" at center
     -     Crossbar Projection: Neutral = 4-7/8"; Depressed = 4"
     -     Crossbar Width: 42" field sizeable
     -     Lock Stile Case: 8-1/4" x 2" x 15/16"
     -     Hinge Stile Case: 6" x 1-3/4" x 15/16"
     -     Crossbar tubing: 1"
     -     Top and Bottom Latch Case: 4" x 2" x 1-7/8"
     -     Vertical Rod: 1/2"

Strike and Fasteners – Device is furnished with standard 299 strike in dull black finish, 248L-4 and 304L strikes. All necessary mounting fasteners are included.

Von Duprin 8827EO-F Fire Rated Surface Vertical Rod Exit device 88 Series

from $ 2,386.80

Von Duprin 8827EO-F Fire Rated Surface Vertical Rod Exit device 88 Series

by Von Duprin

$ 2,386.80

Finish

Quantity

Von Duprin 8827EO-F Fire Rated Surface Vertical Rod Exit device 88 Series. The 88-Series is a traditional crossbar design with proven service on rugged applications. All Von Duprin 88-Series exit devices are UL listed for Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI Grade 1 requirements.

88-Series Fire Rated Surface Mounted Vertical Rod Device (8827-F) - for all types of 8' x 8' double doors; UL listed 3 hours. Fits door stiles as narrow as 3-3/4".

Features: Fully Reversible (Nonhanded), Field Sizeable, 5/8” throw latch bolt.

Dimensions –

     -     Crossbar height to finished floor: 36-13/16" at center
     -     Crossbar Projection: Neutral = 4-7/8"; Depressed = 4"
     -     Crossbar Length: 42" field sizeable
     -     Lock Stile Case: 8-1/4" x 2" x 15/16"
     -     Hinge Stile Case: 6" x 1-3/4" x 15/16"
     -     Crossbar tubing: 1"
     -     Top and Bottom Latch Case: 4" x 2" x 1-7/8"
     -     Vertical Rod: 1/2"

Strike and Fasteners – Device is furnished with standard with 304L strike. All necessary mounting fasteners and the sex nuts and bolts required for the latches are included.

Von Duprin 8847EO-F Concealed vertical rod fire exit device 88 Series

from $ 1,638.00

Von Duprin 8847EO-F Concealed vertical rod fire exit device 88 Series

by Von Duprin

$ 1,638.00

Finish

Quantity

Von Duprin 8847EO-F Concealed vertical rod fire exit device 88 Series. 8847-F fire exit concealed vertical rod devices for all types of 8" x 8" (2438 mm x 2438 mm) double metal doors, UL listed, 3 hours and fits door stiles as narrow as 4 3/4" (121mm). Finishes – US26, US26D, US3, US4, US10B, US10,

Here is the service manual for the 8847-F

Installation Instructions Fot The 8847-F Exit Device

8847-F fire exit concealed vertical rod devices for use on 8' x 8' (2438mm x 2438mm) double metal doors. UL listed, 3 hours and fits door stiles as narrow as 4 3/4" (121mm).

Features

Field sizeable
5/8" (16mm) throw latch bolt
Five popular finishes

Dimensions

Crossbar height to finished floor	36 13/16" (935mm) at center
Crossbar projections - neutral depressed	4 7/8" (124mm) 4" (102mm)
Crossbar length	42" (1067mm) field sizeable
Lock stile case	8 1/4" x 2" x 15/16" (210mm x 51mm x 24mm)
Hinge stile case	6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing	1" (25mm)
Vertical rod	3/8" (10mm) hexagon

Note: Maximum door undercut, 1/4" (6mm)

Von Duprin 8875EO Mortise Lock Cross Bar Exit Device 88 Series

from $ 2,124.20

Von Duprin 8875EO Mortise Lock Cross Bar Exit Device 88 Series

by Von Duprin

$ 2,124.20

Finish

Quantity

Von Duprin 8875EO Mortise Lock Cross Bar Exit Device 88 Series. Von Duprin 8875 mortise lock devices for all types of single or double doors, UL listed for accident hazard installations. Fits stock hollow metal doors with 86 cutouts and door stiles as narrow as 4 3/4" (121mm).

The 8875 mortise lock is equipped with a 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a nonhanded auxiliary bolt for deadlockiing and a faceplace with an adjustable bevel. Field selection of functions are furnished standard. TP, K or L function may be field selected by removing a set screw. Electric locking or unlocking options are available, refer to pages 18-19 in the catalog.

Features

Field sizeable
3/4" (19mm) throw latch bolt
Latch bolt deadlocking
Five popular finishes
Hex key dogging

Dimensions

Crossbar height to finished floor Latch bolt height to finished floor	36 13/16" (935mm) at center 40 3/32" (1018mm) at center
Crossbar projection- neutral depressed	4 7/8" (124mm) 4" (102mm)
Crossbar length	42" (1067mm) field sizeable
Lock stile case	8 1/4" x 2" x 15/16" (210mm x 51mm x 24mm)
Hinge stile case	6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing	1" (25mm)
Lock case	4 5/8" x 5 3/4" x 1 3/16" (117mm x 146mm x 46mm)
Face plate	1 1/4" x 8" x 7/32" (32mm x 203mm x 6mm)
Cylinder backset	2 3/4" (70mm)

Von Duprin 8875EO-F Fire Rated Mortise Lock Cross Bar Exit Device 88 Series

from $ 1,998.88

Von Duprin 8875EO-F Fire Rated Mortise Lock Cross Bar Exit Device 88 Series

by Von Duprin

$ 1,998.88

Finish

Quantity

Von Duprin 8875-F Fire Rated mortise lock devices for all types of single or double doors, UL listed for accident hazard installations. Fits stock hollow metal doors with 86 cutouts and door stiles as narrow as 4 3/4" (121mm).

Features

Field sizeable
3/4" (19mm) throw latch bolt
Latch bolt deadlocking
Five popular finishes
Hex key dogging

Dimensions

Crossbar height to finished floor Latch bolt height to finished floor	36 13/16" (935mm) at center 40 3/32" (1018mm) at center
Crossbar projection- neutral depressed	4 7/8" (124mm) 4" (102mm)
Crossbar length	42" (1067mm) field sizeable
Lock stile case	8 1/4" x 2" x 15/16" (210mm x 51mm x 24mm)
Hinge stile case	6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing	1" (25mm)
Lock case	4 5/8" x 5 3/4" x 1 3/16" (117mm x 146mm x 46mm)
Face plate	1 1/4" x 8" x 7/32" (32mm x 203mm x 6mm)
Cylinder backset	2 3/4" (70mm)

Von Duprin 88EO Rim Crossbar Exit device 88 Series

from $ 1,280.24

Von Duprin 88EO Rim Crossbar Exit device 88 Series

by Von Duprin

$ 1,280.24

Finish

Quantity

The 88EO is an exit only rim cross bar exit device for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 or 161 cutouts.

Series 88 exit devices ... a traditional crossbar design with proven service on rugged applications. Available in rim, mortise, surface and concealed vertical rod mountings. All 88 series exit devices are UL listed from Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 1994, Grade 1.

Von Duprin 88 series catalog

Features

Field reversible
Field sizeable
3/4" (19mm) throw latch bolt
Six popular finishes
Hex key dogging

Dimensions

Crossbar height to finished floor	36 13/16" (935mm) at center
Crossbar projection - neutral depressed	4 3/4" (121mm) 4" (102mm)
Crossbar length	42" (1067mm) field sizeable
Lock stile case	8 1/4" x 2 3/4" x 15/16" (210mm x 70mm x 24mm)
Hinge stile case	6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing	1" (25mm)

Von Duprin 88EO-F Fire Rated Rim Crossbar Exit device 88 Series

from $ 1,657.76

Von Duprin 88EO-F Fire Rated Rim Crossbar Exit device 88 Series

by Von Duprin

$ 1,657.76

Finish

Quantity

Von Duprin 88EO-F Fire Rated Rim Crossbar Exit device 88 Series

Grade: 1	Standards: UL/CUL
ADA Compliant: ADA Compliant	Finish: US4,US26D,US10,US10B,US3,US26
Series: 88	Performance: Heavy Duty
Exit Device Type: Exit Device	Item: Rim Exit Device
Door Handing: Right Hand Reversible	Fits Stile Width: 4-1/8"
For Door Thickness: 1-3/4"	Fire Rated: Yes
Door Width: Up to 48"	Lockdown Type: Less Dogging

Optional Distribution Board, 4 Relay Board Integrated Logic for Controlling Security Interlocks, Auto Operators and Time Delays With FA

Von Duprin 900-8P-FA

$ 111.28

Von Duprin 900-8P-FA

by Von Duprin

$ 111.28

Quantity

Optional Distribution Board, 8 PTC Protected Outputs With FA

Von Duprin 900-BAT

Von Duprin 9827EO-F/9927EO-F Surface Mounted Vertical Rod Fire Touch Bar Exit Device

by Von Duprin

$ 1,477.84

Finish

Series

Quantity

Von Duprin 9827-F/9927-F Surface Mounted Vertical Rod Fire Touch Bar Exit Device. 9827-F/9927-F fire exit surface mounted vertical rod device pairs of doors up to 8´ x 10´ (2438mm x 3048mm) , UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9827-F device has a smooth mechanism case and the 9927-F device has a grooved case. The surface vertical rod device is non-handed except when the following device options are used: SS (Signal Switch).

Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors. Rod and latch guards can be used on hollow metal or tin clad composite fire doors.

The 9827-F/9927-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top – 299F (499F LBR) – Dull Black, Bottom – 304L - Unfinished; Optional Strikes available
Dogging Feature: No Mechanical Dogging, EL and QEL option available
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch
CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; LBR Less Bottom Rod; GBK Glass Bead Kit ; WS Tornado and Hurricane Tested
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Wood or Metal Doors, and 325 SNB for top & bottom latch. Optional 425 SNB available
Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39-5/8" (1006 mm);
Door Undercut 1/4" (7mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm)
Vertical Rods: 1/2" square tubing, standard rods accommodate 7’ (2134mm) door; Top rod length is 34-15/16" (887mm); Bottom rod length is 31-1/2" (794mm); Extension rods available, 1’ (205mm) or 3’ (914mm) for doors over 7’; One piece top rod available for 8’ (2438mm) and 10’ (3048mm) door
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9827EO/9927EO Surface Mounted Vertical Rod Touch Bar Exit Device

from $ 1,544.40

Von Duprin 9827EO/9927EO Surface Mounted Vertical Rod Touch Bar Exit Device

by Von Duprin

$ 1,544.40

Finish

Series

Quantity

Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9827 device has a smooth mechanism case and the 9927 device has a grooved case. The surface vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors.

The 9827/9927 devices are available in the following finishes: US3, US4, US1 0, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 299 – Dull Black, Bottom – 248L4 & 304L - Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; QEL Quiet Electric Latch Retraction; PN Pneumatic Latch Retraction; LBR Less Bottom Rod
Mechanical Options: GBK Glass Bead Kit; PL Pullman Latch; WS Tornado and Hurricane Tested
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal or Wood Doors, and 325 SNB for top & bottom latch. Optional 425 SNB available
Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39-5/8" (1006 mm);
Door Undercut 1/4" (7mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm)
Vertical Rods: 1/2" square tubing, standard rods accommodate 7’ (2134mm) door; Top rod length is 34-15/16" (887mm); Bottom rod length is 31-1/2" (794mm); Extension rods available, 1’ (205mm) or 3’ (914mm) for doors over 7’ "F"; One piece top rod available for 8’ (2438mm) and 10’ (3048mm) door
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9847EO-F/9947EO-F Concealed Vertical Rod Fire Touch Bar Exit Device

from $ 1,645.28

Von Duprin 9847EO-F/9947EO-F Concealed Vertical Rod Fire Touch Bar Exit Device

by Von Duprin

$ 1,645.28

Finish

Series

Quantity

Von Duprin 9847-F/9947-F fire exit concealed vertical rod device for use on pairs of doors up to 8´ x 10´(2438mm x 3048mm) , UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847-F device has a smooth mechanism case and the 9947-F device has a grooved case. The concealed vertical rod device is non-handed except when the following device option is used: SS (Signal Switch) devices.

The 9847-F/9947-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: No Mechanical Dogging, EL and QEL option available
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; LBR Less Bottom Rod; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal and Wood Doors. Optional 425 SNB available
Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39-5/8" (1006 mm) Standard, Adjustable from 35-5/8" (905mm) to 49-5/8" (1260mm)
Door Undercut: 1/4" (7mm) maximum
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm);
Vertical Rods: Round 2 piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9847EO/9947EO Concealed Vertical Rod Touch Bar Exit Device

from $ 1,645.28

Von Duprin 9847EO/9947EO Concealed Vertical Rod Touch Bar Exit Device

by Von Duprin

$ 1,645.28

Finish

Series

Quantity

9847/9947 concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

The 9847/9947 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; LBR Less Bottom Rod; GBK Glass Bead Kit; PL Pullman Latch
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal and Wood Doors. Optional 425 SNB available
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39-5/8" (1006 mm) Standard, Adjustable from 35-5/8" (905mm) to 49-5/8" (1260mm)
Door Undercut: 1/4" (7mm) maximum
Center Case Dimensions: 8" x 2-3/4" x 2 3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm);
Vertical Rods: Round 2 piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9847WDCEO-F/9947WDCEO-F Wood Door Concealed Vertical Rod Fire Touch Bar Exit Device

from $ 2,356.64

Von Duprin 9847WDCEO-F/9947WDCEO-F Wood Door Concealed Vertical Rod Fire Touch Bar Exit Device

by Von Duprin

$ 2,356.64

Finish

Series

Quantity

9847WDC/9947WDC concealed vertical rod device for use on single or double wood doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC device has a smooth mechanism case and the 9947WDC device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

Scalp Plate: Device is furnished standard with an 8" (203mm) long scalp plate for easy access to rods. Note: Do not use on pair of doors with 9975.

The 9847WDC/9947WDC devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch
CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; GBK Glass Bead Kit; PL Pullman Latch
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Wood Doors. 425 SNB required on wood doors without SLM Blocking
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39 5/8" (1006 mm) Standard, Adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm)
Door Undercut: 1/4" (7mm) maximum
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2 1/8" x 1-1/2" (114mm x 54mm x 38mm)
Vertical Rods: Round 2 piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9847WDCEO/9947WDCEO Wood Door Concealed Vertical Rod Touch Bar Exit Device

from $ 2,032.16

Von Duprin 9847WDCEO/9947WDCEO Wood Door Concealed Vertical Rod Touch Bar Exit Device

by Von Duprin

$ 2,032.16

Finish

Series

Quantity

Von Duprin 9847WDCEO/9947WDCEO Wood Door Concealed Vertical Rod Touch Bar Exit Device for use on single or double wood doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC device has a smooth mechanism case and the 9947WDC device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

Scalp Plate: Device is furnished standard with an 8" (203mm) long scalp plate for easy access to rods. Note: Do not use on pair of doors with 9975.

The 9847WDC/9947WDC devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch
CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; GBK Glass Bead Kit; PL Pullman Latch
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Wood Doors. 425 SNB required on wood doors without SLM Blocking
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Device Centerline from Finished Floor: 39 5/8" (1006 mm) Standard, Adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm)
Door Undercut: 1/4" (7mm) maximum
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2 1/8" x 1-1/2" (114mm x 54mm x 38mm)
Vertical Rods: Round 2 piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9848EO-F/9948EO-F Concealed Vertical Rod Fire Touch Bar Exit Device

from $ 2,212.08

Von Duprin 9848EO-F/9948EO-F Concealed Vertical Rod Fire Touch Bar Exit Device

by Von Duprin

$ 2,212.08

Finish

Series

Quantity

Von Duprin 9848EO-F/9948EO-F Concealed Vertical Rod Fire Touch Bar Exit Device device for use on pairs of doors up to 8´ x 10´(2438mm x 3048mm), UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9848-F device has a smooth mechanism case and the 9948-F device has a grooved case. The concealed vertical rod device is non-handed except when the following device option is used: SS (Signal Switch).

The 9848-F/9948-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: No Mechanical Dogging, EL and QEL option available
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal Doors. Optional 425 SNB available
Latch Bolt: Deadlocking Top Bolt, 3/4" (19mm) throw
Deadlocking Bottom Bolt, 1-1/2" (38mm) throw
Device Centerline from Finished Floor: 39 5/8" (1006 mm) Standard, Adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm)
Door Undercut: 1/4" (7mm) up to 3/4" (19mm)maximum
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2 1/8" x 1-1/2" (114mm x 54mm x 38mm);
Vertical Rods: Round 2-piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9848EO/9948EO Concealed Vertical Rod Touch Bar Exit Device

from $ 1,925.04

Von Duprin 9848EO/9948EO Concealed Vertical Rod Touch Bar Exit Device

by Von Duprin

$ 1,925.04

Finish

Series

Quantity

Von Duprin 9848EO/9948EO Concealed Vertical Rod Touch Bar Exit Device device for use on single or double metal doors, UL listed for Panic Exit Hardware. Covers stock hollow metal doors with 86 or 161 cutouts. Devices are ANSI A156.3 – 2001 Grade 1. The 9848 device has a smooth mechanism case and the 9948 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

The 9848/9948 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top - 338 – Unfinished, Bottom – 385A - Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; EL Electric Latch Retractor
Mechanical Options: PN Pneumatic Latch Retraction; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal Doors. Optional 425 SNB available
Latch Bolt: Deadlocking Top Bolt, 3/4" (19mm) throw
Deadlocking Bottom Bolt, 1-1/2" (38mm) throw
Device Centerline from Finished Floor: 39 5/8" (1006 mm) Standard, Adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm)
Door Undercut: 1/4" (7mm) maximum up to 3/4" (19mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2 1/8" x 1-1/2" (114mm x 54mm x 38mm);
Vertical Rods: Round 2-piece adjustable rods; Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm); Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm); Extension rod kits available for doors over 8’4" (2533mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9857EO-F/9957EO-F Three-Point Latching Fire Touch Bar Exit Device

from $ 2,348.32

Von Duprin 9857EO-F/9957EO-F Three-Point Latching Fire Touch Bar Exit Device

by Von Duprin

$ 2,348.32

Finish

Series

Quantity

9857-F/9957-F fire exit three-point latching device for all types of single doors up to 4´ x 8´ (1219mm x 2438mm) or up to 8´ x 8´(2438mm x 2438mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9857-F device has a smooth mechanism case and the 9957-F device has a grooved case. The three-point latch device is non-handed except when the following device option is used: SS (Signal Switch).

Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors.

The 9857-F/9957-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’: 2’4" to 3’ (711mm to 914 mm) Door Size; 4’: 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top & Middle-299–Dull Black, Bottom–248L4 & 304L-Unfinished; Optional Strikes available
Dogging Feature: No Mechanical Dogging, EL and QEL options available
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim
Mechanical Options: PN Pneumatic Latch Retraction; LBR Less Bottom Rod; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4 (44mm) – 2-1/4" (57mm) Thick Metal and Wood Doors, and 325 SNB for top & bottom latch. Optional 425 SNB available for metal doors. 425 SNB required on wood doors without SLM Blocking.
Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw; Deadlocking Rim Bolt, 3/4" (19mm) throw
Device Centerline from Finished Floor: 39-13/16" (1011 mm)
Door Undercut: 1/4" (7mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm);
Vertical Rods: 1/2" square tubing, standard rods accommodate 7’ (2134mm) door; Top rod length is 34-15/16" (887mm); Bottom rod length is 31-1/2" (794mm); Extension rods available, 1’ (205mm) or 3’ (914mm) for doors over 7’ "F"; One piece top rod available for 8’ (2438mm) – 10’ (3048mm) door
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9857EO/9957EO Three-Point Latching Touch Bar Exit Device

from $ 2,187.12

Von Duprin 9857EO/9957EO Three-Point Latching Touch Bar Exit Device

by Von Duprin

$ 2,187.12

Finish

Series

Quantity

Von Duprin 9857EO/9957EO three-point latching device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9857 device has a smooth mechanism case and the 9957 device has a grooved case. The three-point latching device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).

Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors.

The 9857/9957 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’ 2’4" to 3’ (711mm to 914 mm) Door Size; 4’ 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: Top & Middle-299–Dull Black, Bottom–248L4 & 304L-Unfinished; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; SD Special Center Case Dogging; LD Less Dogging
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; E Electric Unlocking and Locking Trim
Mechanical Options: PN Pneumatic Latch Retraction; LBR Less Bottom Rod; GBK Glass Bead Kit; PL Pullman Latch
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (44mm) – 2-1/4" (57mm) Thick Metal and Wood Doors, and 325 SNB for top & bottom latch. Optional 425SNB available
Latch Bolt: Deadlocking Anti-friction Top & Bottom Bolt, 5/8" (16mm) throw; Deadlocking Rim Bolt, 3/4" (19mm) throw
Device Centerline from Finished Floor: 39-13/16" (1011 mm)
Door Undercut: 1/4" (7mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Top & Bottom Latch Case: 4-1/2" x 2-1/8" x 1-1/2" (114mm x 54mm x 38mm)
Vertical Rods: 1/2" square tubing, standard rods accommodate 7’ (2134mm) door; Top rod length is 34-15/16" (887mm); Bottom rod length is 31-1/2" (794mm); Extension rods available, 1’ (205mm) or 3’ (914mm) for doors over 7’ "F"; One piece top rod available for 8’ (2438mm) and 10’ (3048mm) door
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9875EO-F/9975EO-F Mortise Lock Fire Touch Bar Exit Device

from $ 2,348.32

Von Duprin 9875EO-F/9975EO-F Mortise Lock Fire Touch Bar Exit Device

by Von Duprin

$ 2,348.32

Finish

Series

Quantity

Von Duprin 9875EO-F/9975EO-F Mortise Lock Fire Touch Bar Exit Device for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors installations, UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits door stiles as narrow as 4-3/4" (121mm). The 9875-F device has a smooth mechanism case and the 9975-F device has a grooved case. The mortise lock device is non-handed except when the following device options are used: -2 (Double Cylinder) or SS (Signal Switch) devices. See next tab for available outside trim and functions.

The 7500 Mortise lock is equipped with a 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a non-handed auxiliary bolt for deadlocking and a faceplate with an adjustable bevel.

The 9875-F/9975-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313, 315. US32D, US15 available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. Device Lengths: 3’ 2’4" to 3’ (711mm to 914 mm) Door Size; 4’ 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: 575 – Dull Black; Optional Strikes available
Dogging Option: No Mechanical Dogging, EL and QEL option available
Electric Options: RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; E Electric Locking & Unlocking; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; -2 Double Cylinder; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw3 pack for 1-3/4" (19mm) – 2-1/4" (57mm) Thick Metal or Wood Doors; Optional 425 SNB available for metal doors. 425 SNB required on wood doors without SLM blocking.
Device Centerline from Finished Floor: 39-5/8" (1006 mm);
Center Case Dimensions 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 9875EO/9975EO Mortise Lock Touch Bar Exit Device

from $ 1,572.48

Von Duprin 9875EO/9975EO Mortise Lock Touch Bar Exit Device

by Von Duprin

$ 1,572.48

Finish

Series

Quantity

Von Duprin 9875EO/9975EO Mortise Lock Touch Bar Exit Device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4 3/4" (121mm). The 9875 device has a smooth mechanism case and the 9975 device has a grooved case. The mortise lock device is non-handed except when the following device options are used: -2 (Double Cylinder) or SS (Signal Switch). See next tab for available outside trim and device functions.

The 9875/9975 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313, 315. US32D,US15 available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L adjust NL drive screw in mortise lock
Device Lengths: 3’ 2’4" to 3’ (711mm to 914 mm) Door Size; 4’ 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: 575 – Dull Black; Optional Strikes available
Dogging Feature: Hex key dogging standard
Dogging Options: CD Cylinder Dogging; LD Less Dogging;
Mechanical Options: PN Pneumatic Latch Retraction; -2 Double Cylinder; GBK Glass Bead Kit
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (19mm) – 2-1/4" (57mm) Thick Metal or Wood Doors; Optional 425 SNB available for device
Device Centerline from Finished Floor: 39-5/8" (1006 mm)
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm)
Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 98EO-F/99EO-F Rim Fire Touch Bar Exit Device 98/99 Series

from $ 1,267.76

Von Duprin 98EO-F/99EO-F Rim Fire Touch Bar Exit Device 98/99 Series

by Von Duprin

$ 1,267.76

Finish

Series

Quantity

Von Duprin 98EO-F/99EO-F Rim Fire Touch Bar Exit Device 98/99 Series for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case. The rim device is non-handed except when the following device options are used: -2 (Double Cylinder) or SS (Signal Switch).

The 98-F/99-F devices are available in the following finishes: US3, US4, US10, US26, US26D, US28 and 313AN. US32D available with 98 Series only.

Specifications

Device Functions: Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device
Device Lengths: 3’ 2’4" to 3’ (711mm to 914 mm) Door Size; 4’ 2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes: 299F – Dull Black, 499F with Mullions. Optional Strikes also available
Dogging Feature: No Mechanical Dogging, EL and QEL option available
Electric Options: LX Latchbolt Monitor Switch; RX Pushpad Monitor Switch; RX2 Double Pushpad Monitor Switch; E Electric Locking & Unlocking; EL Electric Latch Retraction; SS Signal Switch; CX Chexit Delayed Exit; ALK Alarm Exit Kit; QEL Quiet Electric Latch Retraction
Mechanical Options: PN Pneumatic Latch Retraction; -2 Double Cylinder; GBK Glass Bead Kit; XP Extra Protection
Fasteners & Sex Bolts (SNB): Includes screw pack for 1-3/4" (19mm) – 2-1/4" (57mm) Wood & Metal Doors Optional 425 SNB available for metal doors. 425 and 825 SNB required on wood doors without SLM blocking.
Latch Bolt: Deadlocking, 3/4" (19mm) throw
Device Centerline from Finished Floor: 39-13/16" (1011 mm); 39-11/16" (1008 mm) with Mullion
Center Case Dimensions: 8" x 2-3/4" x 2-3/8" (203mm x 70mm x 60mm)
Mechanism Case Dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
Projection: Pushbar Neutral – 3-13/16" (97 mm); Pushbar Depressed – 3-1/16" (78 mm)

Von Duprin 98EO/99EO Rim Panic Exit Device

from $ 1,180.40

Von Duprin 98EO/99EO Rim Panic Exit Device

by Von Duprin

$ 1,180.40

Finish

Series

Quantity

100+ IN STOCK READY TO SHIP TODAY.

"I've been doing business with US Lock Supply for over 25 years and have enjoyed a great relationship with them. Friendly staff, knowledgeable team, and quick delivery! US Lock Supply is a five star hardware distributor."

Here Is An Installation Video For The 98 & 99 Device.

All Von Duprin 98/99 Series exit devices are UL listed for Accident Hazard and Fire Exit Hardware and are tested in accordance to ANSI Grade 1 requirements.

Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and manufactures exit devices in accordance to ISO 9001 Quality Management System and meets or exceeds accepted U.S. domestic and International standards. All 98 and 99 series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, 2001, Grade 1. Many models are also certified for Hurricane Resistant Applications. Consult your local Allegion sales consultant or the Von Duprin factory for current listings.

It is intended that the information included in this publication, when properly used, will provide clear and reliable guidelines to the proper general selection and application. However, the scope of the information is necessarily limited.

99/98 Specification

99- grooved mechanism case

98- smooth mechanism case

Unusual operating conditions and environments and other external influences can affect the proper application of the products represented. Modifications of these products will also affect UL listings. It is recommended that whenever an unusual application condition exists, or when any modification of a product is considered, that our engineers review the application.

Application engineering services are available to help ensure proper selection or to review any areas where users of Von Duprin products may have questions.

Von Duprin push pad exit devices are available in two external surface styles, designated 98 Series and 99 Series. The two styles are mechanically and dimensionally identical and provide a wide selection of appearance options.

Latch Bolt
Deadlocking latchbolt provides security and improved performance at standard device cost.

The Quiet One®
A fluid dampener decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations. Furnished on all 98/99™ series exit devices.

Von Duprin 990TP-M 26D

$ 257.92

Von Duprin 990TP-M 26D

by Von Duprin

$ 257.92

Quantity

Thumbpress Trim, Mortise prep, Satin Chrome

Von Duprin EPT Electric Power Transfer

from $ 416.00

Von Duprin EPT Electric Power Transfer

by Von Duprin

$ 416.00

Finish

Model

Conecton

Quantity

Electric power transfer (EPT) provides a means of transferring electrical power from a door frame to the edge of a swinging door.

2 models available: EPT-2 and EPT-10

EPT-2 has two 18-gauge wires
EPT-10 has 10 24-gauge wires
Ball and socket joint construction provides cut and pinch protection for wiring
Available in finishes 689 and 695

Electronic power transfers (EPT) provide a wiring path from the door to the frame, allowing products on or around the door to receive power as well as monitoring door status.

The unit is completely concealed when the door is in the closed position and ideally suited for installations with heavy traffic.

Allegion offers two models to meet the needs of any opening, with either two-wire or ten-wire harnesses, and both can be ordered with quick connect fittings.